Database Users

Good regedit for PocketPC WM2003SE

Anyone can suggest a good regedit for PocketPC WM2003SE?
I try PHMRegEdit, but looks like it is for old version of PocketPC.
Thanks
Arto

Registry Editor
Resco Registry from Resco Explorer, last version 5.13, but actually i still like PHM.

I can't even get PHM Regedit to install on my Qtek S100. Looks ok when I run the installer, but nothing is ever actually installed.
As it is still my favourite I have tried a number of times, with hardresets between, but no success.

I believe PHM registry editor is what we called here a "green" software, i.e. you can just copy and paste the exe file anywhere you like and execute it and it will work. So if you have exe file (e.g. from a former installation, a backup or another ppc), you don't need to install it.

Tried again by getting the CAB file instead of the desktop installer. Worked like a charm!

bamse,
Where you put or run the .cab file?
Thanks.
Arto

nowhere in particular : a .cab file ca normally be executed from anywhere...
Are you using cabinstall ? Because sometimes it conflicts with some .cab files. It doesn't work for instance with the icon .cab file of Agenda Fusion : when you click on this cab file, nothing happens... but it's the only .cab file that doesn't work for me...
Hope this helps...

Just copy the cab file to anywhere on your device. Then on the device, open up explorer and browse to the location of the cab. Double clicking on the cab will install it.

Just copy the cab file to anywhere on your device. Then on the device, open up explorer and browse to the location of the cab. Double clicking on the cab will install it.
After this you don't need the cab on your device anymore so if it has not been automatically removed you can just delete it.

If it has not been automatically removed it means :
- that you're using CabInstall (because miscrosoft standard installer deletes tha .cab file once installed !)
- or that nothing has been installed because of an error

Anyone can suggest a good regedit for PocketPC WM2003SE?
Click to expand...
Click to collapse
How about using Tascal RegEdit? I've been using it for a long time.

cayotte said:
Anyone can suggest a good regedit for PocketPC WM2003SE?
Click to expand...
Click to collapse
How about using Tascal RegEdit? I've been using it for a long time.
Click to expand...
Click to collapse
Tried it when I couldn't get PHM Regedit to install but didn't like it. With TRE you can't even search through the registry, right?

I cant find my "Running Programs"

I just hard reset my magician. Since i'm using big storage (my friend did it), only some of the cab files from extended_rom are installed. Now i just found out that my smart dialing, MMS, O2 plus are not included. It was easy to recover those programs since i know the cab files.
However, i cant find the right cab for "Running Programs". Does anyone know which one? Thx.
Sorry for the bad language

Running programs - do you mean in Settings > system > memory > running programs?
If you need a task killer I can send you one or there's many around.
V

That's the one. Thx . So actually it's not a stand-alone program. Yes i found the running programs.
So, the question is changed now. I need the shortcut to that program. Usually magician has the blue box icon with a picture of someone running. Do you know the shortcut?
Thx.

Just tried to restore that icon from my old backup before it crashed. I thought it was just only a link to some program. But it is not! It is an exe file and after i restored it, click the Running Programs, it says "Error opening the shortcut or locating the target filename".
Any clues?

My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.

What does that file do? Just open up the running programs control panel?
If you need it back, just type the following into a text file on your PPC
Code:
22#ctlpnl cplmain.cpl,4,2
and save it as Memory.lnk
Then double click on that file.
Tell me if it works ok.
V

@vijay
i just wanna return my magician to the default system . that's why i'm so curious to get back that program.
@ampda
i'll try that file. thx for the info.

I can post my CAB file but it will also add the O2 xda defaults that can with the Aussie unit

ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...

THANK YOU!!! finally i can access my running programs.
anyway, ive another question . let's say i want that program to be installed automatically after I hard reset. how can you do that? so i do not have to restore them manually from my sd card. thx.

dinoalbert said:
ampda said:
My Running Programs app is in the "default_103133" CAB file from my Mini. I run this file after hard reset.
Click to expand...
Click to collapse
Thats right....just install that cab file "default_103133.cab" and you will have your Running Programs app back....that is, if you saved your Ext ROM files before doing the Big Storage patch, or someone can attach that cab file here.
Now my problem is (sorry this might be Off-topic) , how can I have back the AUTOCONFIG for different Telcos, (especially Asian) ? Its also gone after the Big Storage patch. I dont know which of the cab files I need to have it back
anyone have idea or is there a forum for this in Magician?
thanks...
Click to expand...
Click to collapse
To get the menu and icon run O2Auto.sa.CAB, then install the telco(s) you want to be in the autoconfiq menu.

@nsriza, thanks!!! As simple as this, and I can have my Autoconfig back already?
I thought I need to manually edit the autoconfig.txt to change the paths of the cab files?
Btw, I have already installed the cab files for all the Telcos that I need....but not the O2Auto.sa.CAB yet. Is it okay if I install that O2Auto then install again the Telco cabs?
Thanks...

So has anyone knew how to setup auto installation for cab files (eg. MMS, SmartDialing etc) after hard reset? thx

another OOT question...what does autoconfig.txt and config.txt do? and how to use it?
thx

Im assuming your asking for auto installation for after a hard reset using big storage. if you search for "AutoRUn" on this forum you should find a link on how to create an autorun folder on your storage card. you need the autorun.exe (Found in the search for the link) and a folder called 2577 created in the root directory of your storage card. then all you need to do is add all the CABs that you want to auto install after a HR to a ZIP (not Rar) archive and call that archive extROM.zip. then put that in your 2577 directory and hardreset and it will install all the files in the zip. if you havent already installed the cabs you put in the zip it will actually start installing them as soon as you insert the SD card. have a search around you will find lots of info about this subject.
SpeedN

@Speedn
thx for the suggestion. it's very helpful.

@rockafeller
hi i used big storage to convert my german rom (o2 xda mini) to wwe 1.12. now i lost some features like MMS,Smart dialling, Home zone control, O2plus. (as it was the case with you). It would be great if you could share here how did you get them back to work? i mean, i want the procedure to do so. i have a backup of my german rom.
one more question. i dont see the Phone pad option in my text input list after the bigstorage patch. how can i get it back. any suggestions would be so great..
thanx in advance
kk

@visvaram
if you backup ur extended_ROM, u should able to find related cab files, such as MMS**.cab, SMARTDIALING**.cab. Just tap those files and it will be installed automatically. FYI, backup ur cab files first b4 installing.
Im not sure about O2plus and zone files. Anyone care to help?

.exe to .cab

hey guys...
ok ive had few problems actually experimenting too many things kicks off the rom OBVIOUSLY...i would like to do something like this....
1.my xda II hard resets it self for obvious reasons (too many experiments)
2.there are too many programs installed on my xda II which i use most of the time, few of them are cab so its easy for me to copy them to storage card and install but many others are .exe so everytime a hard reset i have to connect the xda II to the cradle and run the software from the computer....
what i would like to do is just convert or extract .cab from .exe so that everytime i dont have to go through the same thing....this means i can also copy all my softwares as backup on my xda II storage
P.S : there are only few .exe softwares that allow me to extract .cab from it by right clicking and going to winzip option or winrar .....most of them are to be run all over again.
please help
thanks alot in advance

if it's exe which you run from the pc and it using activesync to install the program in most cases all you need to do is to chage the extention from exe to zip and copy out the cab from inside the zip file
otherwise you need an cab maker program search should give you a bunch

Rudegar said:
if it's exe which you run from the pc and it using activesync to install the program in most cases all you need to do is to chage the extention from exe to zip and copy out the cab from inside the zip file
otherwise you need an cab maker program search should give you a bunch
Click to expand...
Click to collapse
hey man...
did as you said.....will give you an example what i did...
copied noname.exe to d:/
went to command prompt went to d:/ renamed noname.exe to noname.zip
and came back to d:/ in windows and double clicked it and it says "Cannot open file : it does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
any yeah also tried right click extract here same error message
any ideas ? i am sure u do have few
thanks

well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it

Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
gotcha....tools ....folder options ...view....uncheck hide extensions for uknown file types....ok ......
went to \program files\microsoft active sync on my computer went to the folders of programs installed and voilllla..... found the .cab and .arm files
thanks alot for the help mate

Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install

No men
get it
see in c:\archive of program\microsoft activesync
when you install a program for defect install this place.
this not happens is for this program get menu opcional installing c:\archive of program\NaMe Program
fine you only copy files .cab in you storage
the problem is when you intall the cab file this automaticaly is delete..****...
for this not happen install this before install any .cab NoDeleteCab.cab
thiss run in my Imate jam ...
enjoy...

Re: No men
SuckMe said:
get it
see in c:\archive of program\microsoft activesync
when you install a program for defect install this place.
this not happens is for this program get menu opcional installing c:\archive of program\NaMe Program
fine you only copy files .cab in you storage
the problem is when you intall the cab file this automaticaly is delete..****...
for this not happen install this before install any .cab NoDeleteCab.cab
thiss run in my Imate jam ...
enjoy...
Click to expand...
Click to collapse
that's coool...i guess i also read somewhere that if you hold click on the cab file in the pda and uncheck or check the read only box and then run .cab it wont get wiped out.....have'nt tried it though...
regards....

mtbsoft said:
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
Click to expand...
Click to collapse
ok i tried this.....but it did'nt quite work out.....i double clicked a file it opened up active sync asking for reinstall yes or no....i did a soft reset on the pda and took it out from the cradle and clicked no and cancel on that reinstall window.... where did i go wrong ?
is it like that i have to click yes and when it starts installing on the pda then soft reset the device ?
regards

zairyaab said:
that's coool...i guess i also read somewhere that if you hold click on the cab file in the pda and uncheck or check the read only box and then run .cab it wont get wiped out.....have'nt tried it though...
Click to expand...
Click to collapse
A read only CAB won't be deleted, I use it all the time.
zairyaab said:
mtbsoft said:
...when the "Reinstall Y/N?" dialog appears on the device perform a soft reset....
Click to expand...
Click to collapse
is it like that i have to click yes and when it starts installing on the pda then soft reset the device ?
Click to expand...
Click to collapse
Yes, you have to wait for the CAB file to be copied over to teh device and then it says "Reinstall Y/N?" on the device, then you do the soft reset.
If you are going to use CAB files I would strongly recommend you grab a copy of CABInst as well, it is excellent (and free).

MMm
This work in my Imate Jam
i don't know
this work in your device
but this cool
the Imate Jam autodelete .cab files when finish the install this
enjoy....

mtbsoft said:
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
Click to expand...
Click to collapse
excellent (Y)

extraxting a cab file from an exe file

in paticular i want the cab file for MorphGear. how do i do this? I have tried using cabinst but that doesnt seem to do anything

Some ".exe" are extractable with a soft such as "Winrar" :wink:

if that doesn't work then try the following.
1. Remove app from you computer and device
2. Disconnect device from comp
3. Run exe for app
4. When you see the message "this app will be installed on next sync" go to start---search
5. look for *.cab that was created or modified today and is less than 1MB (change file size to whatever value you think is appropriate)

Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?

chrisredmayne said:
Problem is..
I cant get activesync to work, hence needing the cab file to install morphgear :-(
So I dont think that will work
Any other ideas?
Click to expand...
Click to collapse
Can you install Activesync tho, dont have to sync just get it to install. If you can than run the morphgear.exe and after it says it will install on the next sync, go to C:\Program Files\Microsoft Activesync\ and you will see a Marat folder, the .cab is in there. It will almost always make a new folder and put the .cab of the program you are install into the Activesync folder, if it is not there than it created its own folder under Program Files and the .cab should be in there.
Just because im bored I downloaded this MorphGear.exe
http://dl.filekicker.com/send/file/155967-7256/MaratSetupPPC2003.exe
And have attached the .cab that was put into my ActiveSync folder for you.

wow thanks that was very nice of you!
i checked that folder and there was about 10 different morphgear files that id been messing about with! And they worked! Well chuffed i am

Is anyone playing gameboy games on it? On the website listed in the first post the module (MaratSetupPPC2003.exe) leads to an invalid link. But i found it on xda http://forum.xda-developers.com/showpost.php?p=904167&postcount=5 i installed it but it only wants to see snes roms

Installing CAB files.

how do I install a CAB file directly to the phone?

just copy the cab file to ur Storage card through a memory reader. then start the CAB file from File Explorer
OR
Connect the Phone by its USB Connection. and then copy the file to any folder on device memory then choose the CAB file from the file explorer.
Easy Enjoy

Is there a setting to keep the cab, now it deletes it after isntalling.

Riel said:
Is there a setting to keep the cab, now it deletes it after isntalling.
Click to expand...
Click to collapse
Not sure on you're specific phone, but with the Hermes/Kaiser there is a settings somewhere NOT to delete the file when installed.
I have a folder on the MicroSD card called "Install" that has all the CABs to get it working after a hard reset. The only thing I don't have are my phone contacts and the like
One day I'll get there though....
Thinking about it there could be a field in one of the many tweaking tools for the UI

wm6 does not delete cabs after install. this happened to me on wm5. don't know how to disable that feature

Elwyn M3100 said:
NThe only thing I don't have are my phone contacts and the like
Click to expand...
Click to collapse
usually activesync saves your contacts & when u do HR just name ur ppc back to the last name u used, then contacts should be added back to your contact list on the ppc.
another thing is to use pim backup software like pim backup which is free here: (can save emails/sms/mms as well!)
http://forum.xda-developers.com/showthread.php?t=299705

When I extract a cab file (and put it on my xda ii - wm6.1 rom) it is just an .xml file. When I open it on my laptop or xda ii it just comes up with html.
How do I get the cab to install?

If a cab is deleted after installtion, you can use Schap's Advance Config Tool to disable that.

Tippex said:
When I extract a cab file (and put it on my xda ii - wm6.1 rom) it is just an .xml file. When I open it on my laptop or xda ii it just comes up with html.
How do I get the cab to install?
Click to expand...
Click to collapse
You've 'extracted' too far. Programs like WinZip and WinRar by default list 'cab' files as archives. There is nowt wrong with this, as they are in a way. Except in this instance you don't want to see them as such.
Copy the .cab files to your PDA and install from there. Once the .cab files are on your PDA they are treated like an executable.
Got it