I have a new Vario II which has a strange problem with the car charger. It will only charge if it is in standby. As soon as you turn it on it stops charging. It works fine with the mains charger and the USB lead. Anyone help please.
Peter
Is it an original charger for the vario II ? because like the TyTN it needs a 12v/ 1A charger.
I had a general charger with 12v/500mA and it didn't charge when the device was on. My brodit carholder and charger deliver 12v/1A and has no problems with charging.
No it is not an original charger, I will try and get one to check. Thanks for the reply.
Peter
Related
Hi Guys,
Is the charger on the XDA Exex the same as the other execs as I want to buy a car charger and they do not have any for the exec yet?
Thanks
I can't remember where I got mine from but I got a USB car charger for my XDA II or was it IIs and the USB cable connects to the cigarette bit - which means that I can just change cables and use the Exec USB cable in the car charger.
Not sure what to do about exec holders for the car yet? Anyone have any ideas.
Thanks
I've been charging mine in the car using a generic mini-usb charger that I used with my C500 phone...
Cannot charge xda executive with car charger ,when connected nothing happens light does not go red and also the connection icon does not show
make sure you dont have a faulty charger... dont know what you are using but i believe most people use the cigarette lighter to usb converter and then just use the usb cable... also have you tried pressing the on and off swith with the charger plugged in ?
BR
car charger
Hi and thanks for the fast reply mate <yes it is a new charger from o2 .
No i have not tried the on off with the switch ,but would i still be able to charge when i am using tomtom
Whell....I use the cigarette lighter to usb adapter and usb cable ...at times i have had to quik press the on/off swith and at times plug and unplug the cable to get it to charge ....I used this as a "jump start" method only and no problems after that with using it whillst on charge (even with tomtom)..... other than that you may have a faulty charger or fag lighter to usb adapter (I never seen what a o2 one looks like).
BR
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
hi, yeah i have had this problem, and so have a few of my clients, seems that not enough juice flows through the non branded versions, unlike from o2's or Brodits cables
I found that a regular USB cable into a Cigarette Lighter -> USB Socket didn't work until I joined pin 4 to pin 5 on the USB B Mini plug. All of the adapters I had that worked, but only powered (no data, i.e. Brodit and mains adapter) seemed to have pin 4 joined to pin 5 (pin 4 isn't normally connected at all). Once I did that mod it worked fine.
Cheers,
Steve.
bluesign2k said:
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
Click to expand...
Click to collapse
Orange shops carry a charger intended for HTC manufactured devices (i.e. the SPV C500/M500 range) which works fine. Only £9.99.
Hi
The charger that came with my HTC P3600 says 5V, 1A. However most of my other miniUSB chargers which I use with a I-mate JAMin & K-JAM say 580mA or 500mA. I also have some adapters for the HTC P3600 which would allow me to plug in one of these miniUSB chargers. The question is should I? Would it make any difference? In case you're wondering why I would want to do this, its because I have a charger at work, home, girlfriends, in the car etc. And I would rather have a few adapters than shell out for loads more chargers. Thanks for listening!
Well, the Amp on your charger is how much Juice it can deliver.
So as far as I can guess you would have 2 scenarios, 1 is it will work but it will charge your HTC slower, or second option is that the charger will overheat.
Hello everyone
I cannot charge my iPaq using my AC adapter cable from the last two weeks, but I am able to charge it using the cradle when the cradle is connected via USB. I am not able to charge it even when the cradle is connected using the AC adapter. I have bought a new HP AC adapter and the condition is the same. Need suggestions and help.
your help is appreciated
This post is on behalf of my lady wife. She has a Samsung Omnia Pro B7610 and is unable to charge her phone in the car, it will charge using the AC adapter, and via USB while hooked up to a PC but will not charge using the car charger. The charger works fine with my HD2 so I'm kind of lost for ideas.
So any help would be appreciated.
My wall charger does not work suddenly, only on my Omnia II. It works fine with other phones. I've tried to have other charger on my phone but it does not recognize wall adapter. So, how to resolve this issue.
Thank you very much
i have also this probleme , you must restart your omnia with the the car charger connected , at each time, i have a omnia 2 ( I 8000 ) , sorry for my bad english
I had a similar problem: in fact the phone connections were oxidized, and I had to change them.