Hello,
My PDA restarts itself every 8-10mins (soft reset). It is also unable to find a network ("No service") so I'm not able to make and receive calls.
I don't really know what I've done that problem appeared (installed/uninstalled some software, made some registry cleanup using Pocket Mechanic).
It's huge problem for me, I don't know what to do...
Please, help me! Thanks
Artur
Hi,
Now it's OK(finally!). It had to be some software conflict. After unistalling the program and deleting key in registery and reseting the pda came back to normal work, it found the network and doesn't reset enymore. Ufff...
Regards to all.
Related
has this error whenever i try to sync the 2nd time ...
have to restart and resync again
I've the same problem. It was all well until yesterday. My case is even worse than you. The error message appear every time and xda II disconnects itself. I can do any activesync right now.
Have tried soft reset, delete and recreate partnership. Don't really want to hard reset unless I have no choice.
I have found out that my problem was caused by installing a trial version of the CEBook Reader 3.5.
What I have done is restore from Xcopy, this copy was done before installing the software above, which works fine. Once I install the software, the problem comes back.
So be careful !
seems its a problem of networking.. If you are using a Proxy server, then specify that in your MS outlook settings. :?
i still cant figure out what is my problem ...
see this link : http://support.microsoft.com/default.aspx?kbid=243029
this is all what you want :wink:
also check these links:
http://support.microsoft.com/default.aspx?kbid=324864
http://www.expansys.it/forumthread.asp?code=CMQ-H3970&thread=96
http://www.cewindows.net/faqs/activesync/syncerrors.htm
Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!
Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.
Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!
I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one
really! which software could i use to reboot the phone??
also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?
yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.
What software did you use or could i use to reboot my ppc chuckchuck?
Hello,
I just uninstalled the Arabic support package (Pocket Arabizer Suite v2). Afterwards, I am not able to use my wing to make calls. I even tried to search for network and couldn't find any. I was thinking if I reinstall the Arabic package might help. Unfortunately, ActiveSync is not working no more as well. Also, I tried hard reset (by holding the 2 soft keys along with soft rest) but it wont reset.
Anyone got a clue ?
Please don't cross post. Post once, and wait for a response ... don't flood the forum.
Hi All,
first of all , hope to put this issue in the correct forum path....
my friend has a problem with the Pro2, as you can see by the attach , concerning the keyboard password lock.
His password doesn't works and also performing all the reset type , after the reboot the mobile starts with the keyboard locked (only emergency number is possible call).
he has reported me that at the first time, the mobile has gave to him an alphanumeric code to try to unlock the code but it doesn't solved the issue.
probably re-installing the software (6.5) the problem is solved but he doesn't want loss the date / appointments due the fact he has a doctor.
please help us.
thanks
Hi again,
it's appreciated also if someone know if there's a way to perform the backup in this condition.
Thanks again
tezzuro said:
Hi again,
it's appreciated also if someone know if there's a way to perform the backup in this condition.
Thanks again
Click to expand...
Click to collapse
Did he ever use Activesync or Google Sync? If he did, most of his information sould be saved that way. Also, you may want to try doing a hard reset but only after exausting all attempts to back your data up. Send a couple of PM to Senior memebers or Moderators, you might get some help that way!!
Good luck!!
thanks for your post....
principal problem is that is not possible connect the mobile to pc in order to use activesync or other program due the fact the mobile is locked....and not save data has been performed before....
Double chack that his SIM card is in correctly.
Same exact thing happened to me. My phone battery was at about 10% and when I tried the password that I had set... it didn't work. This made me frantic and very ticked off. I had a ROM on my SD card so i just reflashed from there. Since then I always install a different locking app then the stock one. I just can't trust it. So I think youre only option is to hard reset and hopefully your contacts are saved to the SIM so they won't be deleted.
Hello fellow hd mini users!
Here's a nice problem four yous to solve.
All of a sudden my bluetooth stopped working. Nothing happens when I try to start it. The error message I get is that the BT stack can not be loaded (0x1).
I did not install any new software after the last time it did work correctly, and I don't have TomTom installed on my hd mini.
(One possibility I am contemplating, is that CleanRam is the culprit, but I ran it before without problems.)
I don't feel much like a hard reset.
Is there a way to repair or reinstall the radio software ( I found a BTstackTP2.cab somewhere, but I would rather not try this because it is designed for the Touch PRo 2.)
Good luck solving this one!
Check if there is a shortcut of BTTrayCE under Windows\StartUp folder.
BTtrayCE is in the startup directory. And it runs allright (I used Process Manager to check).
In that case, l don't think you will avoid hard reset.
I am having the same problem, Kindly advise
Did anyone fix it ?
Thanks