Related
Is there a way to increase the ear speaker volume on the phone? When I'm making a call and I walk outside I can barely hear the person I am calling. I have to be in a fairly quite place to hear clearly on my Titan. I tried increasing the HKEY_CURRENT_USER/ControlPanel/Phone/"Vol" value but I'm not sure that really did anything.
Any suggestions? Thanks!
slybitz said:
Is there a way to increase the ear speaker volume on the phone? When I'm making a call and I walk outside I can barely hear the person I am calling. I have to be in a fairly quite place to hear clearly on my Titan. I tried increasing the HKEY_CURRENT_USER/ControlPanel/Phone/"Vol" value but I'm not sure that really did anything.
Any suggestions? Thanks!
Click to expand...
Click to collapse
Check out this thread http://pdaphonehome.com/forums/ppc-6800-xv6800/90858-moderate-fix-low-volume-issues.html. I had the same issues, followed the dirs in this thread, and now all is well!
Thank you!
blandrp said:
Check out this thread http://pdaphonehome.com/forums/ppc-6800-xv6800/90858-moderate-fix-low-volume-issues.html. I had the same issues, followed the dirs in this thread, and now all is well!
Click to expand...
Click to collapse
will this work on the verizon xv6800?
just install the audiopara file in the \windows folder and soft reset
i try to copy it over and it gives me an error saying its read only and stuff like that
Hi all,
The call quality of the HD2 is very good. Reception is great, people understand me very well and I can understand them very good.
My only problem is that the sound is so loud, when I'm using my phone at my ear (so without speaker or bluetooth).
Do you have this as well? Is there somewhere a master volume that can be set?
To be clear: the volume is already at the minimum...
Thanks!
Koen
Does the earpiece speaker also pop/crackle somtimes when the tones are high or very loud? I hear a ticking in the earpiece speaker.. that is very anoying!
Will probably swap my device for a new one.
Not really.
But as I find it now too loud, I don't like to use to make normal phonecalls.
Koen
I have the same problem..
One weird thing though, it's only on outgoing calls, incoming the sound isnt too loud!
i had the same problem but only with outgoing calls an mine sounded terrible, still does( think my speaker is broken)
You can edit the registry.
in HKEY_CURRENT_USER\Controlpanel\Soundcategories\ you have INCALL and INCALL 2, i think one is ingoing and one is outgoing calls.
Edit Initvol, i have both mine on 2 now. and the volume is much better!
Bouloama said:
Does the earpiece speaker also pop/crackle somtimes when the tones are high or very loud? I hear a ticking in the earpiece speaker.. that is very anoying!
Will probably swap my device for a new one.
Click to expand...
Click to collapse
I have the same problem as you do
theguvnor11 said:
i had the same problem but only with outgoing calls an mine sounded terrible, still does( think my speaker is broken)
You can edit the registry.
in HKEY_CURRENT_USER\Controlpanel\Soundcategories\ you have INCALL and INCALL 2, i think one is ingoing and one is outgoing calls.
Edit Initvol, i have both mine on 2 now. and the volume is much better!
Click to expand...
Click to collapse
Thanks, now it's great!!!
I've got the exact same thing!
The quality is great, but sometimes the volume is just way too loud, almost up to the point where it hurts my ear.
One additional thing is when I get a notification on the background that a message has arrived during one of those loud calls, volume actually switches back to normal.
In my registry incall2 was set to 5. Resetted it to 2, hope it works
could anyone clarify
Where can I find that
HKEY_CURRENT_USER\Controlpanel\Soundcategories\ you have INCALL and INCALL 2 thing. Please help! How do I enter registry?
narkolitar said:
Where can I find that
HKEY_CURRENT_USER\Controlpanel\Soundcategories\ you have INCALL and INCALL 2 thing. Please help! How do I enter registry?
Click to expand...
Click to collapse
to enter registry, i need to install the little app name PHM RegEdit (free app) or Resco RegEdit.
henh said:
to enter registry, i need to install the little app name PHM RegEdit (free app) or Resco RegEdit.
Click to expand...
Click to collapse
Made the first step, done the things in the register, but the volume is still too high. What am I doing wrong?
narkolitar said:
Made the first step, done the things in the register, but the volume is still too high. What am I doing wrong?
Click to expand...
Click to collapse
Not sure if I did a soft-reset, but you might just give it a shot.
Both outgoing and incoming call volumes are now fine on my device...
[edit]
Actually got another loud outgoing call..
When I took a better look at the inCall and inCall2 properties, they seem to be for the notifications you get when you're in a call.
So changing them to '2' is OK, but doesn't actually solve this issue.
It may be an explanation to why my sound swapped back to normal after receiving a notification though.
[/edit]
erik.alphenaar said:
Not sure if I did a soft-reset, but you might just give it a shot.
Both outgoing and incoming call volumes are now fine on my device...
[edit]
Actually got another loud outgoing call..
When I took a better look at the inCall and inCall2 properties, they seem to be for the notifications you get when you're in a call.
So changing them to '2' is OK, but doesn't actually solve this issue.
It may be an explanation to why my sound swapped back to normal after receiving a notification though.
[/edit]
Click to expand...
Click to collapse
Tried a soft reset too, but my ears still hurt! Any other suggestions?
This is totally unacceptable, has nobody got a cure for this? I can't use my *phone* as a phone, the volume is deafening! Both speakerphone and earpiece are way too loud, even on the lowest volume setting.
try this one
Here's a solution : you need to use the Schapman advanced configuration tool v3.3 (freeware).
Go to "HTC audio manager" -> set "music volume" (or something close, I don't know of it is labelled in english, I only have the french version) to 30 or above (below 100, which is the maximum) and then soft reset your device.
http://forum.xda-developers.com/showthread.php?t=418151
I can't seem to get this to do the trick. Is there anyone out there who has used a program to specifically lower the earpiece and speakerphone volume on their HD2 'Leo'? I'm going to have to return my handset if I can't lower the volume. I love the phone but if I can't make calls on it it's useless!
*bump*
This needs keeping near the top as it's a MASSIVE problem. Doesn't *everyone* find their HD2 far too loud??
It happened to me only once, when I woke up, press power button to get the screen on and dialed a cab, it was way too much loud.
Today I made some calls, received them as well, and it was ok.
New Response From [ Richard (UK - Ireland Support (Tech)) ]
Dear valued HTC customer,
Thank you for contacting our Customer Support Center. We are dedicated to providing you with the best quality service and answering all of your questions and concerns.
We are aware of the issue but it’s not a fault with this device. It has been determined that this is not a hardware fault but a software issue and there should be a hotfix to be released soon to resolve it. Please monitor our website for the hotfix release.
If these steps have not helped, please let me know by responding using the link provided and I will be happy to check again for you.
Best regards,
HTC customer support team
HTC Corp. Global Service Division
http://www.htc.com/europe/CA_Hotline.aspx
Call Center at: 44-120-271-4530 if you have further questions
Customer Information
Name A*** ******
Telephone ***********
Email Address ************************
Country United Kingdom
Inquiry Information
Inquiry Type Technical Support
Inquiry Description Hello, I have just bought the HD2 and the speakerphone volume is incredibly loud, even on the lowest setting. It is unusable! The speaker is distorting, it is that loud. Is there a registry fix one can do to solve this? Thankyou.
Issue Date & Time
2009/11/26 10:31
Does anyone have a link to the part of the site where these supposed hotfixes will be....and how long will they be coming, any ideas? So far it's the speakerphone & earpiece volume which are of the utmost importance for me, then the pink camera etc etc etc.
Hi all,
pls. know anybody, where can be a problem with my ringing.
I choosed "increasing ring" in settings, but it always start ringing on level, which i have set with my volume buttons
I desperate because this
I want to use something like my previous phones...where works profile and defined volumen ringing and, increase ringing egg.
Thx for all help.
nobody has problem with this?
if you have set increasing rigning start your ringing on low level an it increase? becasue my not
pls. help, where can be a problem? nobody knows?
pls. only write here if your increase type of ringing works.
thx for each help
danusko said:
pls. only write here if your increase type of ringing works.
thx for each help
Click to expand...
Click to collapse
Hey mate, sorry to see noone picked up your question...
So, increased ringing is working fine for me, and I'm almost certain it works for you too.
However, the guys at Microsoft had a rather... "interesting" way of creating this feature: why you don't probably hear an increased ringing sound is because increased, microsoft way, means that the "song" will first ring at your current volume, that a little bit louder, that louder again...
So keep in mind, the entire sound (so if it's 10 seconds long, you will hear the entire 10 seconds, the sound at one level). When the sound is played from the beginning, only then will you hear a louder sound and so on...
Hope everything got clearer!
Alex
Thank you amang for your important info. I use mp3 song and this is long song. But increasing from current volume level is strange .
Do you thing, that is possible to change, that increase ringing will start at level 1? Or maybe (but this is maybe impossible) increase after 2 second of ringing and not after whole mp3?
thx
danusko said:
Thank you amang for your important info. I use mp3 song and this is long song. But increasing from current volume level is strange .
Do you thing, that is possible to change, that increase ringing will start at level 1? Or maybe (but this is maybe impossible) increase after 2 second of ringing and not after whole mp3?
thx
Click to expand...
Click to collapse
Knobody knows if is here any way to do this?
Maybe with mortscript, which will control if is ringing ON and if yes, then will increase level of sound to higher. Eg. after 1 sec..
Is it not possible? I tried to search which registry key control phone ringing status (if now phone ring - incoming call) or NOT.
Really is it not possible to do this?
thx for any help
Would anybody please try to make a cab that would somehow lower the incall volume?
I know there are many of us that "hate" our Leo for damaging our ears! Please help us fix that!
Don't point us to HTC support! Have been trying that for about 7 weeks now, with no real result but pathetic fixes.
regards,
GG
First off I will be moving this thread to general when I have finished responding.
Secondly, can you explain your problem a little better please. If you really mean turn the in-call volume down, ie NOT when the phone is in speakerphone mode, you can do this now by simply holding the down volume key while in the call to make it happen.
If this is not what you mean then have another go at explaining yourself.
Cheers
WB
unless i've read this wrong i think you win the worst question of the year award...lol
as above, just turn down the volume.
sorry to but in here and sorry if its a noob question but i've had the same problem...
when i answer a call the volume is so loud everyone around me can hear the call!
now i've tried clicking the side key to lower the volume but it goes to the black screen with the bar and silent and vibrate on there and its only on 6%
I'd want to say (another noob comment) that i have sometimes found the sound is irregular, sometimes its low but normally very loud... isnt there meant to be a function where you place the phone next to you're ear and it lowers the volume so its not damaging you're ears?
I think that question is valid. You can only turn it down so much. All sounds on HD2 are too loud; be it call, music, speakerphone, ringing. You can hear speaker breaking at 50%, and your ears bleeding at more. Distortion is present even at low values.
So, I'm with OP, but I want to expand request: how to lower ALL volume on HD2? In other words, instead 10-100%, I want 1-10%.
maybe i just havent noticed due to being pretty much death
the question should be: how to reduce the default incall vol, is that right?
The earpiece and handsfree produce a lot of noise, I agree. there are a few threads already about volume too high and poor sound quality i.e. distorted audio. with earpiece calls try raising the volume first to just above minimum, then keep lowering the volume even when level indicator has reached minimum to reduce call volume further.
Don't be quick to judfe please!
wacky.banana said:
First off I will be moving this thread to general when I have finished responding.
Secondly, can you explain your problem a little better please. If you really mean turn the in-call volume down, ie NOT when the phone is in speakerphone mode, you can do this now by simply holding the down volume key while in the call to make it happen.
If this is not what you mean then have another go at explaining yourself.
Cheers
WB
Click to expand...
Click to collapse
Maybe I haven't explain myself well enough. Why do you and all the smart asses that gave all that cheap advice think that just because we're not mods or developers we're dumb.
It is a well known problem with the HD2. Even with the volume all the way down (while talking on the phone) it's still very loud!!!! Very Very Loud! And I don't mean that trough speaker phone but through the earpiece!
Does this justify my frustration and my legitimate question?
If you can't say nothing good say nothing at all!
thank you!
I know of those threads!
htc12345 said:
The earpiece and handsfree produce a lot of noise, I agree. there are a few threads already about volume too high and poor sound quality i.e. distorted audio. with earpiece calls try raising the volume first to just above minimum, then keep lowering the volume even when level indicator has reached minimum to reduce call volume further.
Click to expand...
Click to collapse
trust me I know of all those threads and I follow them daily but no real solution so far!
G
Not funny!
paulking said:
unless i've read this wrong i think you win the worst question of the year award...lol
as above, just turn down the volume.
Click to expand...
Click to collapse
If you think that making fun of someone else's problem is funny think again!
We do expect more of the senior members here but then again maybe we're wrong in doing so!
why do you assume I don't know how to use the volume buttons?
It's a well known fact that hd2 is very loud while incall and even with the volume all the way down is still too loud!!!
G
its loud indeed,
I and I would be personally intrested in lowering the top volume, so highest settings are more reasonable, and stepping down from that actually make it lower sensibly
I had this issue with the call volume being too loud even when turned down, and sometimes it would distort/crackle with certain words/letters. I used the following registry tweak and it's worked absolutely perfectly for me. I've used it on the old ROM and the latest.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
See if that helps
snerkler said:
I had this issue with the call volume being too loud even when turned down, and sometimes it would distort/crackle with certain words/letters. I used the following registry tweak and it's worked absolutely perfectly for me. I've used it on the old ROM and the latest.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
See if that helps
Click to expand...
Click to collapse
I tried that weeks ago and it did absolutely nothing.
sorry to prove you wrong!
snerkler said:
I had this issue with the call volume being too loud even when turned down, and sometimes it would distort/crackle with certain words/letters. I used the following registry tweak and it's worked absolutely perfectly for me. I've used it on the old ROM and the latest.
HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2" in both inCall and inCall2
See if that helps
Click to expand...
Click to collapse
I've done that too but that volume is for incall notifications only. You can verify that by having someone call you while you're engaged in a call. You will barely hear them if you turn the volume to "2".
thank for trying though!
regards,
G
I think the members want you to be more specific. Identify what ROM & radio you are using and what you have done so far to resolve the problem.
tried 'em all
romac said:
I think the members want you to be more specific. Identify what ROM & radio you are using and what you have done so far to resolve the problem.
Click to expand...
Click to collapse
I've tried all official roms!!! Also tried a lot of the cocked ones with pretty much same result, very little difference whatsoever!
G
sunking101 said:
I tried that weeks ago and it did absolutely nothing.
Click to expand...
Click to collapse
I wonder why it works for some and not others?
snerkler said:
I wonder why it works for some and not others?
Click to expand...
Click to collapse
On drugs trials, lots of people claim the placebo works...
placebo works too... for a few sad short seconds...
sunking101 said:
On drugs trials, lots of people claim the placebo works...
Click to expand...
Click to collapse
yep!
Long live Placebo! But when reality checks in changes everything!
G
Every time I answer the first call of the day, I have to turn up the volume, which is very low. Does it default to low volume from start up?
Also, I frequently put my phone on vibrate with no ringer, then back to full volume ringer throughout the day. This wouldn't have anything to do with call volume, would it? Sometimes mid-day the call volume is back to low.
I use a bluetooth when driving to work, but adjust the call volume on that device, not the phone.
Am I just doing something dumb, here?
Thanks
jdzialak said:
Every time I answer the first call of the day, I have to turn up the volume, which is very low. Does it default to low volume from start up?
Also, I frequently put my phone on vibrate with no ringer, then back to full volume ringer throughout the day. This wouldn't have anything to do with call volume, would it? Sometimes mid-day the call volume is back to low.
I use a bluetooth when driving to work, but adjust the call volume on that device, not the phone.
Am I just doing something dumb, here?
Thanks
Click to expand...
Click to collapse
theres a setting in sounds and notifications, that changes the way the volume reacts to a phone call, its called increasing ring....change to just ring and your should be fine...also what rom are you on?
TaylorPPC said:
theres a setting in sounds and notifications, that changes the way the volume reacts to a phone call, its called increasing ring....change to just ring and your should be fine...also what rom are you on?
Click to expand...
Click to collapse
Stock T-Mobile ROM
That setting you mention only has the choices ring tone, and ring type, which I had on Vibrate AND ring.
jdzialak said:
Stock T-Mobile ROM
That setting you mention only has the choices ring tone, and ring type, which I had on Vibrate AND ring.
Click to expand...
Click to collapse
hmm idk, i never use stock roms, but maybe someone else will chime in for ya. there may be a cab floating around for a volume fix/patch....im sure a quick search will help u out.
TaylorPPC said:
hmm idk, i never use stock roms, but maybe someone else will chime in for ya. there may be a cab floating around for a volume fix/patch....im sure a quick search will help u out.
Click to expand...
Click to collapse
ok thanks. This is my first Windows phone. Installing a different ROM seems over my head, unless I can do it on my MAC?