Please , please can anyone tell me if it is possible to remove the crap $icrosoft Bluetooth drivers and on my SPV M500 and install better ones. As they are so crap and have taken out alot of function.
Please tell me there is a way
Thanks
Brian
What do you want??? I'm using that same MS stack on my S110 and I cannot say I miss anything compared to Widcomm on my old iPAQ, everything I need (ActiveSync, OBEX, SerialPort) can be done via BT. What are you missing???
Besindes you can install another stack like the Toshiba one or one from Bluesoleil and disable the MS one (cannot be uninstalled because it is in ROM).
Magican with 64MB RAM cant run Widcom but maybe the 128MB ones like the S110 can, but I'm not brave enough to test it. Despite I've no idea where to get the Widcom stack for PPC.
one of the most important things is my car kit requires me to activate the serial port on port 5, but My IPAQ in the bluetooth i click on the carkit port and select connect, and works fine, but i do not have that fuction with my Orange M500, until i can connect the port it will not work so thats why i need other bluetooth software that has this fuction. it seems like $icrosoft is the onlt bluetooth stact that does not have this fuction, and they have cut it down
Hope you understand that
Well I use my Holux 236 GPS on Port5 using SPP (SerialPortProfile) so the functionality is in the MS stack for sure.
Sorry and by the way, where can i get the Toshiba one or one from Bluesoleil bluetooth stack drivers and how do i disable the $icrosoft ones
Thanks again
Brian
Yes, but it does not have the manual connect fuction like other bluetooth statcks do, and i can not connect to the carkit without it. my other device have that fuction and works well, just not my M500
Brian
You can get the bluesoleil one here: http://forum.xda-developers.com/viewtopic.php?t=18537&highlight=bluesoleil
The Toshiba one can be found here: http://forum.xda-developers.com/viewtopic.php?t=15604&highlight=toshiba
Important: Both stacks are not perfect. The bluesoleil is limited because the Magician is not a device it is registered on and because of that it has a 5MB data trasfer limit before you need to start it again (like a trial). The Toshiba one is really good but unstable at times.
You best bet is prolly the Bluesoleil one and the "trial" limitation can be removed, see here: http://forum.xda-developers.com/viewtopic.php?t=24801&highlight=bluesoleil
Instructions are avail in those two threads too. Could you let me know how it goes, I'm thinking of using another stack too.
Using a GPS mouse should work without problems. I guess you're doing something wrong. The MS stack establishes the serial port connection automatically once an application tries to use that port. I don't know how it works, but the stack can separate between a connection through the serial profile using Active Sync and a connection using a navigation software to the GPS mouse. For me, it works with no problem. I can use ActiveSync and afterwards go into my car, switch on TomTom and it connects to my bluetooth GPS mouse automatically.
I guess it also has to do how the corresponding navigation software deals with the BT stack. Therefore you should try another software and see if it works better.
It's basically true, that you can do almost everything with the crippled MS stack aswell. Even browsing the net through ActiveSync, even though it has no PAN profile. What it really lacks is the A2DP profile. I think WM5 also features HID, for keyboards, mouses and stuff.
i do not have any problem with any other bluetooth device, it just my CK3500 karkit requires you to do a manual connect, and the MS stack does not have that function.
And thanks to Private-Cowboy, will try this and post update
Thanks again
brian colston said:
i do not have any problem with any other bluetooth device, it just my CK3500 karkit requires you to do a manual connect, and the MS stack does not have that function.
And thanks to Private-Cowboy, will try this and post update
Thanks again
Click to expand...
Click to collapse
Then really it's the car kit that's at fault. :?
TheBrit, looks like you was correct, problem with the carkit
Thanks
Brian
Dandie said:
Using a GPS mouse should work without problems. I guess you're doing something wrong...
...It's basically true, that you can do almost everything with the crippled MS stack aswell. Even browsing the net through ActiveSync, even though it has no PAN profile. What it really lacks is the A2DP profile. I think WM5 also features HID, for keyboards, mouses and stuff.
Click to expand...
Click to collapse
I'm afraid I not fully agree with you...
In my case (I have a MDA Compact) for my bluetooth GPS mouse to work properly within TomTom 5, I need to bond the GPS mouse with COM5. And that means that I cannot connect simultaniously to an external GSM (for TomTom Traffic via GPRS).
Why an external phone on my MDA Compact? On the MDA I have my work provider and on an external phone I have my private provider with GPRS (a bit difficult I know).
As said to two functions together doesn't work with the MS stack because of the bonding of the GPS mouse on COM5.
Except...
Except when I install an old version of Bluetooth Tools!!! With Bluetooth tools I can bond my GPS mouse to a virtual COM port, which TomTom 5 recognizes! And now I can also use my external GPRS phone!
OK, I can have 2 connection through my MS stack. as i do it
i bound com 5 to my portable Slim GPS until and run tomtom 5.10 in my car, and that works fine, then on my car kit i click connect to paired device and it then connect fine,(so i have a com 5 connection to my GPS and a connection to my hands free car kit). all through my Orange SPV 500 at once
This work great,
But i wanted to use the car kit for handfree and GPS, but as my gps does not work on my car kit i am stuck with my portable Slim GPS unit for now
Brian
brian colston said:
OK, I can have 2 connection through my MS stack. as i do it
i bound com 5 to my portable Slim GPS until and run tomtom 5.10 in my car, and that works fine, then on my car kit i click connect to paired device and it then connect fine,(so i have a com 5 connection to my GPS and a connection to my hands free car kit). all through my Orange SPV 500 at once
This work great,
But i wanted to use the car kit for handfree and GPS, but as my gps does not work on my car kit i am stuck with my portable Slim GPS unit for now
Brian
Click to expand...
Click to collapse
Yes, it works with a handsfree carkit. But it doesn't with an external phone, maybe because the phone is a 2-way connection? Try it and you'll see it doesn't!
Ok sorry about that
Brian
Is there a way to use my Microsoft IntelliMouse Explorer for Bluetooth with my PocketPC
I remember reading about a hacked thinkoutside cab file that allows non thinkoutside bluetooth mouse to work with pocket pc's, i cant remember where though so you'll need to google or search the forum i believe it is possible though.
good luck
R
I have wasted so much time and energy looking for such a driver - I have decided to rather get a ThinkOutside mouse than waiting until someone hacks the newer drivers
I had one on loan, it was awesome to work like that - almost like a mini notebook
The other Bluetooth Mice are too :? big anyway ....
I simply don't get what will cost Microsoft to release a driver for their hardware for their OS
Hey guys,
i wanna buy a small size bluetooth mouse to use with my Athena?
Any suggestion, usb isnt an option?
Thanks...
T.
http://forum.xda-developers.com/showthread.php?t=315700&highlight=Mouse
This should get you started
Isnt a smaller bluetooth mouse available? Iam looking for a stylish solution,
maybe silver finish?
Logietch traveler bluetoooth mouse!!
work really good in x7500
also the Bluetooth mouse from Bluetake BT-500 works fine with Ameo and WM6
i use the stowaway bluetooth mouse, works like a charm.
How can i use the touchpad on my Jamin as if it were the touchpad on my laptop?
I used to use Gremote with my diamond but dont think thats supported for the prophet. /dont mind if its via WIFI or BT
many thanks
Andy
Never mind, turns out Gremote does work after all
Just needed AS 3.5
Hey, I've bought a KeySonic mini bluetooth keyboard to use with my kaiser hoping to use it in place of a laptop for lecture typing. Trouble is when I connect the two the pairing LED continues to flash.
I am aware that windows mobiles HID support is lacking however others have succeeded in connecting there WM6 devises to bluetooth keyboards...
Does anyone know what there doing that I'm not?
Thanks guys!