hi guys,
If anyone has Dopod 699 or one of it's series please help me
simply i need a backup copy of the system....
if you wanna help me please follow these steps:
1- run xbackup check all data and press start
2- after finishing go to storage card and cut the file which has been created and paste it in a safe place
3- hard reset your device
4- wait until it finishes installing....
5- repeat step 1
6- get the file which has been created, put it in a zip archive and upload it.
7- restore the backup that you have created the first time.
thanx
guys, i really need it so please someone help me
Hi,
I'm trying to install XGin 4 onto my X8 because a few people on these forums advised me to.
The problem is when I try to install it I get an error saying ''No files found'' in Xrecovery.
This is only my second time to install a custom rom so I could be missing something very simple here but any help would be appreciated.
I downloaded the rom here:
http://shpitisme.blogspot.com/
I placed that in the root of my sd card
I booted into Xrecovery and wiped the cache
Then chose install custom zip from sd card
When I select ''XGin_4.0.zip'' I get the ''no files found'' error
Can anybody help please?
Xgin 4 is given as a restore ROM.
Extract the zip on your computer and you will find a folder there with 4 files inside.
Put that folder in SD > xrecovery > backup > *put folder here*
Then go to xrecovery, backup and restore, restore and select XGin 4
P.S. Make sure that the folder's name does NOT have spaces or you'll get errors.
Chris95X8 said:
Xgin 4 is given as a restore ROM.
Extract the zip on your computer and you will find a folder there with 4 files inside.
Put that folder in SD > xrecovery > backup > *put folder here*
Then go to xrecovery, backup and restore, restore and select XGin 4
P.S. Make sure that the folder's name does NOT have spaces or you'll get errors.
Click to expand...
Click to collapse
Thank you very much!
hi guys ....
today. i flashing this rom
http://forum.xda-developers.com/showthread.php?t=1441620&page=188
the general launcher in this rom (ADWlauncher1.3.3.56).
ADWlauncher 100%
but... i need to remove ( recovery mod + download ) from
power bottom .
how i can do it ???
Install TouchWiz 4.0 http://icsforums.com/forum/showthread/207 then use Titanium backup to remove ADWlanucher.
help
^^^^^
not work
please heeeeelp me
You must replace 2 files (using root explorer) in system/framework. Framework-res.apk and android.policy.jar
Search forum to find those files.
heeelp
^^^^
i download GoLuncher
and delete ADWluncher
But did not work and the
heelp me
Read my post. Find these files from any open, clean ROM for Your device and replace them. Reebot and U be happy
help
i found the files ...
and i select delete
but ..Appeared writing ( can not delete this file because file system is red only)
What do I do ...
At the top of screen U can se a little button (Mount R/W) tap on it, change to mount R/O now U can paste files. Then tap on them again -> mount R/W. Wait a minute for soft reebot, Thats all...
help
the device was restarting boot animition only
U replace these files by files form open ROM or only delete these files?
U can read with understanding?
I wrote U that U must REPLACE these files by files from OPEN ROM not only delete...
Now U have to find a CWM install pack with these files...
???
i flashing the rom and the phone was work ...
can you Explain the Way in steps ..
First, U must find 2 files on forum, google or where U want, this file must be from OPEN ROM thats mean these are clean, non modification inside.
Put this 2 files to sdcard in your device.
Now U must replace these 2 files using root explorer, copy- from sd card, paste to system/framework, ofcourse before paste U have to tap on button mount r/w.
Thats all to do.
good
I understand all steps .
can you give me Download Link for the files i need it .
please ..
+
i make framework-rs.apk file from here
http://forum.xda-developers.com/showthread.php?t=1497622
A file that replaced it last time
I don't have these files cos i have other device. Sorry U must find these by Yourself
..
how i can found the files + thank you for help me
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
itworks78 said:
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
Click to expand...
Click to collapse
This is a Development section not a Q&A section. There's another section for this.
Instructions here
1. Make sure your phone is plugged in...
2. Open this folder: OS C: / Users / Your name / AppData / Local / Temp
3. Your user profile’s temporary folder will open. Keep it opened, as we’re going to need to copy a file from this location in a little while.
4. Launch Kies and wait for the phone to connect.
5. You’ll see an offer to upgrade firmware of your phone – click on the firmware upgrade button. If no Upgrade click on Tool's / Firmware Upgrade and Initialisation or Firmware Upgrade setting's.
6. A few windows will pop up with questions about backup, etc – answer the questions, making sure to do a backup, and let it proceed. A window will pop up saying “preparing files”, and then a window will pop up again, showing the download progress.
7 Pay attention to the download progress. When it reaches 100%, your phone will enter “Downloading Mode” and begin flashing. YOU MUST FOLLOW THE NEXT STEP AS SOON AS THE FLASH STARTS.
8. During the flash procedure, go to your Temporary folder and refresh its contents. You will see a file called tmpXXXX.tmp (the XXXX’s will be random numbers). This .tmp file is the encrypted ROM archive – ignore it, and look for a new folder created with a similar name (or else sort by date and find the newest folder), and open that instead. Inside you will see a .tmp / .zip file. Right-click on that file, choose copy and paste it to desktop Don’t try to move the file (using “cut”, or dragging the icon to your desktop) – just copy & paste.
9. Your phone should complete the flash successfully.
You need to copy the firmware file from your temporary folder within the period that your phone is being flashed, as it gets deleted immediately after flashing is complete. I would estimate that you have around 2 – 3 minutes to complete step 8. so you just need to be paying attention when the flash begins.
I'll be doing this tomorrow.
I'll be here