Database Users

Any one Has I-Mate K-JAM?? please i need some help

hi guys,
If anyone has K-JAM please help me
simply i need a backup copy of the system....
if you wanna help me please follow these steps:
1- run xbackup check all data and press start
2- after finishing go to storage card and cut the file which has been created and paste it in a safe place
3- hard reset your device
4- wait until it finishes installing....
5- repeat step 1
6- get the file which has been created, put it in a zip archive and upload it.
7- restore the backup that you have created the first time.
thanx
__________________
Ralf

[Q] XGin 4 won't install. Please help

Hi,
I'm trying to install XGin 4 onto my X8 because a few people on these forums advised me to.
The problem is when I try to install it I get an error saying ''No files found'' in Xrecovery.
This is only my second time to install a custom rom so I could be missing something very simple here but any help would be appreciated.
I downloaded the rom here:
http://shpitisme.blogspot.com/
I placed that in the root of my sd card
I booted into Xrecovery and wiped the cache
Then chose install custom zip from sd card
When I select ''XGin_4.0.zip'' I get the ''no files found'' error
Can anybody help please?

Xgin 4 is given as a restore ROM.
Extract the zip on your computer and you will find a folder there with 4 files inside.
Put that folder in SD > xrecovery > backup > *put folder here*
Then go to xrecovery, backup and restore, restore and select XGin 4
P.S. Make sure that the folder's name does NOT have spaces or you'll get errors.

Chris95X8 said:
Xgin 4 is given as a restore ROM.
Extract the zip on your computer and you will find a folder there with 4 files inside.
Put that folder in SD > xrecovery > backup > *put folder here*
Then go to xrecovery, backup and restore, restore and select XGin 4
P.S. Make sure that the folder's name does NOT have spaces or you'll get errors.
Click to expand...
Click to collapse
Thank you very much!

Return to Stock Rom D803 from Kit Kat Rom

Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated

itworks78 said:
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
Click to expand...
Click to collapse
This is a Development section not a Q&A section. There's another section for this.

Can someone pass me their kies update from g930A

Instructions here
1. Make sure your phone is plugged in...
2. Open this folder: OS C: / Users / Your name / AppData / Local / Temp
3. Your user profile’s temporary folder will open. Keep it opened, as we’re going to need to copy a file from this location in a little while.
4. Launch Kies and wait for the phone to connect.
5. You’ll see an offer to upgrade firmware of your phone – click on the firmware upgrade button. If no Upgrade click on Tool's / Firmware Upgrade and Initialisation or Firmware Upgrade setting's.
6. A few windows will pop up with questions about backup, etc – answer the questions, making sure to do a backup, and let it proceed. A window will pop up saying “preparing files”, and then a window will pop up again, showing the download progress.
7 Pay attention to the download progress. When it reaches 100%, your phone will enter “Downloading Mode” and begin flashing. YOU MUST FOLLOW THE NEXT STEP AS SOON AS THE FLASH STARTS.
8. During the flash procedure, go to your Temporary folder and refresh its contents. You will see a file called tmpXXXX.tmp (the XXXX’s will be random numbers). This .tmp file is the encrypted ROM archive – ignore it, and look for a new folder created with a similar name (or else sort by date and find the newest folder), and open that instead. Inside you will see a .tmp / .zip file. Right-click on that file, choose copy and paste it to desktop Don’t try to move the file (using “cut”, or dragging the icon to your desktop) – just copy & paste.
9. Your phone should complete the flash successfully.
You need to copy the firmware file from your temporary folder within the period that your phone is being flashed, as it gets deleted immediately after flashing is complete. I would estimate that you have around 2 – 3 minutes to complete step 8. so you just need to be paying attention when the flash begins.

I'll be doing this tomorrow.

I'll be here

Crosscall Trekker M1 : No Update File on TFCard (Firmware's installation issues)

Hello everyone ! I hope you're all doing all right
I make a third post about my issues (and probably yours for those who have the same phone) on reinstalling the original firmware of my Crosscall Trekker M1.
My situation had evolved since the time I started making researchs on that phone.
For now I have the original Firmware and the method to install it.​
There are the links of my 2 previous topics on that subject if you want to learn more :
HTML:
https://forum.xda-developers.com/general/help/apply-update-sdcard-failed-rooted-t3676453
HTML:
https://forum.xda-developers.com/general/help/crosscall-trekker-m1-how-to-reinstall-t3691514
(For thoses who want to have it, here's the link of the firmware)
HTML:
https://www.dropbox.com/s/zpz2p0b75rlw1pl/LU652R%28HS-L635%29_L1185.6.02.00.EU00_MultiDownload_201601292005_user.tar.gz?dl=0
So it appears that I can reinstall the stock rom as an uptade with a sdcard by going on the Emergency Mode
(When the phone is power down : press volume buttons + & - and power button to go on the emergency mode)
The firmware at first is compress on a .tar.gz format.
When I extract the archive with 7zip, I got a i635.v1 file
I'm suppose to put it on the root of the sdcard to perform the installation.
So I formatted my sdcard and put the file on the root.
I put the sd card on the phone
Unfortunately for me when I start the phone on Emergency mode I have an error message:
No update file on TFcard
There are somes pictures that I took during that operation so you can see step by step :​
My 32gb sd card just formatted
The contain of the ROM
Here you can see the extension of the i635.v1
Here you can see the ROM archive before I extracted it
This is when I launch the device on Recovery mode (by pressing Vol - and Power buttons)
This is what the Recovery mode looks like
The Rom appear on the Recovery mode
This is what appear when I launch the device on Emergency mode
And this is the error that I have
On an other tutorial who explain how to install the ROM with an sdcard,
I saw that the extension of the unzipped archive should be i635.v1.bin​
Link of the tutorial mentionned
HTML:
http://forum.gsmdevelopers.com/showthread.php?t=8728
I started to think that my problem for now is the format of the ROM.
Maybe I need to convert it on .bin
Am I wrong ? Does someone got any more clues ?
I'll stay alert on the post and during the time I'll have an answer I wich you a nice day ! :good: