Related
File Explorer does not support Bluetooth file trasnfer , I am using JAS/JAR running WM2005. AM I missing something?
there is a registry change you can make to add support for this - see http://wiki.xda-developers.com/index.php?pagename=Universal_Registry under To change the ability to receive files via Bluetooth (OBEX)
i've not tried this myself, though!
If you don't mind spending on 3rd party software then Resco File Explorer may be your best set and they now have a WM5 compatible version.
Likewise to transfer from your PC to the phone your windows PC file explorer should manage it provided your device is paired. But don't forget to turn on the bluetooth on the device and also the "accept all incoming beams" as this is often confused as being mandatory for IR transfers only.
Kind Regards
access is denied
when i try to change values it give me error of access is denied, can anybody help me
failed
followed all the changes mentioned in this post and try to send a file to my PC. It recognizes my PC but when i click on tap to send...it tries for a few seconds and then gives a status saying failed
I think it is at your PC end, and I have had similar problems depending on the bluetooth setup that I had on the pc, I could activesync on bluetooth, but not send files, yet on an alternative machine I could do both. They were running different bluetooth dongles and thus settings and drivers.
Hey people,
I have a XDA exec and I am just wonering if anyone knows any (preferably free) programs that allows me to connect my XDA with my Mac mini. I cant seem to use the bluetooth to send thing over (all the time it just says decive is not compatible with this file or somthing.
Anyone help? Thanks.
No activeSync as of yet, sorry.
There is software available but it isnt free.
Ignore the file incompatible message and click on send anyway. It's pure nonsense. The universal will download it anyway.
i think you might as well get a SD Crad reader to transfer file.
i use USB SD card reader tranfer file from my powerbook to my dopod 900 if i have 2 or more file to send it
Yes I already hd an SD card in there, but not a card reader.
When I try to send somthing to it via bluetooth, it just says "device does not have nessesery services" and fails to send? Also, when I look under paired devices, I look under say my nokia 6680, and it says:
Device Services: SDP Server, Hands-Free Audio Gateway, Headset Audio Gateway, OBEX File Transfer, SyncMLClient, Nokia OBEX PC Suite Services, OBEX Object Push, Dial-Up Networking, Imaging
When I look under my XDA exec, it only says:
Device Services: Service Discovery, Voice Gateway, Voice Gateway, Dial-up Networking
in yr mac under yr System Preferences bluetooth.
have u tried to delete yr xda exec pairing
and pair it again??
after yr pairing with yr exec try to send it again.
hope its work.if it cant work pls let me knw i will check it out with my friend.
Keep an eye on this site too - they say they are working on WM5 support at the moment.
I used it for my ipaq and it worked really well - will probably get the new version when they have syncing sorted for WM5 too
http://www.pocketmac.net
Cheers,
Smiffy.
I have tried pairing it and unpairing it several times but to no avail.
I also saw that, and when it becomes available for WM 05, I will probably buy it.
my dopod wm5 work together with my powerbook well.
Mac os X and jasjar
Hi chaslam,
To get it working you need to change a registry setting...See below:
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
You can then send via bluetooth...(you get a message saying not supported, but it will send, files appear in my documents folder)
Regards
hippo
Sorry but I dont understand that at all lol. Where do I type that in?
bluetooth sending
no problem, I've been there and still am sometimes! you need to edit a registry setting. To do that you can use some software installed to your jasjar. Do you have a method to get files copied to jasjar at the moment? if so let me know and I'll send you the application and tell you the steps to go through.
ps. what version of Mac OS X are you using?
Sorry I havent got back to you sooner, ive been very busy the last couple of days.
Yes I can do it via a PC I have, but my Mac is the main computer that I use so I would like to transfer things via that.
I would be very greatful if you could send me the program. If you dont want to post it on the forum you could send it to my email if thats ok. Its [email protected] (dont worry about spambots as its my Spam email address what I post on forums).
I am using the latest version of 10.4.3.
Thanks
ok, got the program installed but I am not sure how to acually change it. I get to the opening page and it says:
hkey classes root
hkey current user
hkey local machine
hkey user
When I click on on of these it does nothing. Just lets me change what it says. I cant find the obex thing and all of that.
Sorry if I have being stupid, but could somone help me on what to do from here?
Ok been looking around the forum and found a much simpler and safer way to do this.
Just go to settings > Connections > Beam > Accept all incoming Files
Much simpler and safer, and it works!
Thanks everyone for your help.
bluetooth
That's Great - I should have checked the easy option first!
Hmmm I tried this lastnight and I have "receiving all incoming beams" enabled and I couldnt BT any files over.
Are you sure you didnt use IR?
Try re pairing your exec and see if it works. Worked fine with me.
Oh and IR is the little infared box on the phone. Completely different from bluetooth.
Got it working - Shoulda tried re-pairing really!
Cheers Chaslam
On the subject of syncing data from your Universal to a Mac.. there are two utilities that are due to be updated to support WM5 soon and they are
PocketMac
&
Missing Sync
These are the only apps that will sync directly to a mac as far as I know... unless anyone knows better??? please let us know :lol:
Hi,
Can someone help me? I recently bought iMate JASJAR. I have no trouble to connect with Desktop with ActiveSync 4.1 and WIN XP Home SP2. However, I have troubles to connect with the PC at work running ActiveSync 4.1 and WIN XP Professional SP2. The PC detect USB and Mobile Device but has error message saying not connected probably and may not work properly......
The ActiveSync never get connected. Please help. Thanks.
William
I used to have the same problem, but I discovered, as did others on this forum, that plugging the USB connecter into the Universal while the Universal is off works best.
1. Push the power button on the Universal to turn it off.
2. Connect the USB cable.
3. The Universal turns itself on, and
4. ActiveSync connects and syncs.
HTH!
I think there are issues with firewalls and anti virus applications that also prevent Active Sync from working correctly, maybe that's where your problem lies?
Regards
Take a view your Windows firewall, then, open the exceptions and look about the ActiveSync and fix it.
Hi, Everyone: Thanks for the advise. However, I tried all you mentioned but still not working. My problem is the PC did not recognize the device from USB connection. I did try the windows firewall and make sure the check mark shown on all "ActiveSync" items. But it is still not getting recognized. I have no troubles for Win XP Home Editions w/SP2 at home PC. I am having the same AntiVirus and Internet Security (All from Symantec) on Home and Work PCs.
Please advise.
Thanks.
Wel, Be sure you have the last ActiveSync 4.1 version?
What do you think if you erase the program (in the PC that you have the problem) and install it again.
I had have the same problem and I did the way I share with you. Let me know if it works!
Luck.
Hi
I had same problem.
I fixed it by plugging my ppc into my laptop once that connected i then plugged it back into my main pc and bingo
_^.^_
Hi,
I did reinstall the ActiveSync 4.1. Then, the other finally recognize the device now. However, I have two other problems now:
(1) The Sync did not get completed. I always got Erroe Emssage saying "The ActiveSync encounters problems from desktop. Support Code: 85010014.
(2) Then, I tried to connect to the old machine which I Sync no problem before, now it processing the Sync forever.
It appeared that I cannot really Syn for both machines now.
Please advise.
Try to soft reset your ppc.
Regards,
Arto.
I have been struggling with a similar (perhaps the same) issue which I have just found the fix for.
The environment is Exchange2003 SP2, ISA2004, XP PRO SP2 laptop running Activesync 4.1, Win Mobile 5.0 phone edition PDA (Qtek 9000).
The PDA synchronises with Exchange Activesync Server via a cellular (GPRS) connection no problem.
The problem we had is when the PDA was attached to the laptop via the USB cable (or Bluetooth) - the error we got was " Your account in Microsoft Exchange Server does not have permission to synchronise with your current settings. Contact your Exchange Server Administrator. Support Code 85010001 " which is clearly cobblers because it syncs fine over a GPRS internet link. Also the PDA takes between 2-3 minutes to error out and I have seen some posts in other topics that interprett this delay as a failure.
The above symptoms occur after a hard reset of the PDA and a de-install / re-install of Activesync 4.1 on the Win XP Pro laptop.
The clue to the fix was that another domain user, using the same Win Mobile 5.0 device, and the same Win XP Pro laptop, had no problems via a USB connection and I could not see what was different about their AD / Exchange permissions.
It turns out that new domain users using Win Mob 5.0 PDAs have no problems whereas existing (older) users (possibly those who used PPC 2003) have got something in their domain profile that causes the problem. Solution is to delete the domain profile (a copy first would be wise) and recreate it - bingo problem solved.
Hi, Waltzing:
Thank you very very much about your comments. You are very correct. My case is with Notebook running XP Pro SP2 which I used at work and was connected to iMate PDA2K w/WM 2003 2nd Edition before. I wait for almost 2 hrs to complete the Sync at home computer. I am kind of concern I have to wait so long everytime. Any advise?
Can you tell me how to delete the previous Domain as you indicated in your reply. I try not to hard reset the PDA. I already re-install the ActiveSync 4.1 and it can connected now. However, the Support Code is still there. I tried to Sync individually, but I always have the same problems for Calendar and Contact which are the most critical items for me.
Another issue for Contact. I found that I have several contacts has a lot of info in Note in PC but got truncated to the PDA JASJAR after Sync. Is that normal? Is there anything can be done to keep those lenghty note in the contact?
Please advise the procedures.
I really appreciate.
Thanks.
Hello Williamchu, I have done some more testing and I have to make a correction - I have solved this problem but for me it was NOT a profile issue. It is likely to be to do with your work proxy server.
As I am sure you know - in order for a WM 5.0 device to sync with Exchange Server via a GPRS cellphone connection you have to tell WM 5.0 the Internet URL of the Exchange Server - typically something like mobile.somedomain.com
When you connect your PDA to your PC via a cable - Activesync (on your PC) will search for the Exchange Server via it's name e.g. mobile.somedomain.com - the problem is that, in many local area networks, Activesync cannot resolve mobile.somedomain.com to the IP address of the Exchange server except via a proxy server (in our case an ISA server). This is why Activesync appears to hang - it spends all it's time looking for an Exchange Server it cannot find (I have also seen it throw up sys errors 85020006 and 85010001 at this point).
Connect your PDA to your PC (via a USB cable) after you have logged the PC onto your work domain.
On the PDA go to Start > Settings > Connections > Connections
Under "My Work Network" you will see either "Edit my proxy server" or "Set up my proxy server" depending on wether a work proxy server has been configured or not. You need to know what your proxy server name is and check both check boxes. Your IT guys will tell you what your
proxy server name is.
My apoligies for the bum steer about profiles - I have a complex test environment and changed 2 things simultaneously (without realising it) to try to fix this problem one of which was a new profile - which as it turns out has nothing to do with the problem. I hope this fixeds it for you.
Hi, Waltzing: Thank you for the info. However, what if I did not even select the Exchange Server to start with ActiveSync. I don't need to Sync the server. I just need to Sync the local machine Outlook Personnel Folders not the Public Folders. I skip the setup part when ActiveSync asked me. I still get the same error message.
Another issue, How can I delete files from "Storage Memory", somehow, it is 97% full. I installed most of the program in Storage Card which I have 4GB and I have plenty room left. I don't know why the "Storage Memory" got so full. After I uninstall some programs, I only free up Program Memory but not the Storage Memory. Any idea?
Do you have any idea about the Contact Note got truncated?
Thank you for all your kindness and advise.
William
Williamchu, I will contact you about this.
williamchu said:
Hi,
I did reinstall the ActiveSync 4.1. Then, the other finally recognize the device now. However, I have two other problems now:
(1) The Sync did not get completed. I always got Erroe Emssage saying "The ActiveSync encounters problems from desktop. Support Code: 85010014.
Click to expand...
Click to collapse
Well this problem gets solved when u open Outlook on ur PC and then Help --> Detect and Repair.
williamchu said:
Hi, Waltzing: Thank you for the info. However, what if I did not even select the Exchange Server to start with ActiveSync. I don't need to Sync the server. I just need to Sync the local machine Outlook Personnel Folders not the Public Folders. I skip the setup part when ActiveSync asked me. I still get the same error message.
Another issue, How can I delete files from "Storage Memory", somehow, it is 97% full. I installed most of the program in Storage Card which I have 4GB and I have plenty room left. I don't know why the "Storage Memory" got so full. After I uninstall some programs, I only free up Program Memory but not the Storage Memory. Any idea?
Do you have any idea about the Contact Note got truncated?
Thank you for all your kindness and advise.
William
Click to expand...
Click to collapse
William did u manage to finally solve the problem??
I have tried to pair two different cell phones to the 8525 via Bluetooth in the past 2 days.
When I attempt to Bluetooth connect from my [Samsung] A707 Sync, it finds the 8525 . . . but when I try to choose "Select," the Sync tells me:
"Not Available
Delete Paired Device"
On the HTC 8525, it finds the Sync and gives me the services available of:
a) Serial Port
b) Dialup Networking
I can't seem to find a way to copy the Bluetooth-capable pictures and ringtones that I want onto the 8525.
What am I missing? It seems that the 8525 doesn't like to take multimedia files from other Bluetooth phones! What should I do to get the 8525 to pair up to share pix/vid/songs/ringtones with other phones (not meaning using the 8525 as an internet sharing device)?
Make sure the 8525 is visible and then send th file to it. It should come up with the option to accept or reject file.
To send use a file explorer. Hold down stylus on file you want to send. This will give you a pulldown menu which you can choose to beam file. Choose bluetooth, do search and select target bluetooth device...
Cheers...
On a specific [Bluetooth-capable] ringtone, I went under Options with my Samsung A707 Sync mobile phone. It says 'Send via' > 'Bluetooth'. However, my 8525 isn't in the paired devices list, so it attempts to find the 8525 (which is set as visible and the Bluetooth is active). It locates the 8525, but then the Sync displays the message:
"Not Available
Delete Paired Device"
Bloody 8525! Jeers to it!
What about sending the other way?
On the HTC 8525, it finds the Sync and gives me the services available of:
a) Serial Port
b) Dialup Networking
I can beam a picture successfully to the Sync, but when I try to send it from the Sync it returns the message in the prior post.
Hi,
I was able to install activesync but not to get PC and 3G synchronized.
In explorer, I can "see" it but no synchronization (in My computer I have an icon "mobile device", when I doubleclick I get no detaiel, no folders, no file
When I try to link (USB is checked) I get a message saying nothing can be found
When connecting, on the 3 G I get 3 options... the uppermost is "Activesync"... this is checked
Can somebody help or show me the threads to be read (and that realy help)
Thanks
ActiveSync only works with XP, not with Vista or Win7. For Vista download Mobile Device Center. Install first and then connect. happy thrills.
I'm using XP...
I can copy files to and from the device, but no activesync...
Strange.. still no solution to this problem.
r u using illegal win xp?
Nope... laptop so...
Do you have any software firewall installed? Might be a reason, had it before..
Try uninstall and reinstall ActiveSync and associate the device again. It worked for me once before
I had some problems with activesync and data transfer. It would sync but would disconnect after a while during file transfer. I was told it was an unusual problem. Nevertheless, the nice people at HTC changed the mainboard and I'm now problem free. They mean it when they say they are people centric. I'm a potential customer for life!
Activesync keep on appear automatically
Hi,
I have Garmin mobile XT, SPB shell V3.00 and WK Task installed in my Jade, and i have problems where Activesync launch automatically every time after i used my Garmin. This is quite annoying, did anyone has the same experience?
Thanks.
Vincent