Related
Hi All,
I have MDA compact unlocked. When I use a in car charger, it does not charge the phone when I plug the cable into the phone.
I have to do a soft reset with the USB cable attached and then the orange LED will come on. Now, I do not always want to do a soft reset everytime that I wanna charge my phone in the car. Hows anyone had this problem?
Thanks in advance.
im using an orange spv c500 car charger and mines working fine? what charger do you have? motorolla? spv? imate?
I brought one from ebay. so most likely to be a third party make.
How much is your charger?
I think you need the fifth pin connected to ground. This is what the original chargers do. You can either buy a special car cable for the SDA-Music or Magician, or cut the existing cable of your power supply and solder it correctly (Pin 5 to ground). What I did was to solder a 5V car adapter together with the cable of the Magician (Pin 5 to ground), the cable of my GPS mouse and of my BT Headset. You can do that too, provided that the car adapter delivers enough power (800 mA to 1 A) and all the devices you want to load are 5V ones.
£7.99 from orange.co.uk was free delivery when i got it
£7.99 from orange.co.uk was free delivery when i got it
I have been after a car charger for my Exec and as O2 dont sell one i searched ebay for one. There are loads on there so bought one and it was deliverd in 2 days. But it dont work (the charger has a sticker on it saying its for motorola v3) I have emailed the seller 3 times and he wont reply. I will be reporting him to ebay. But i wanted to warn you all to avoid the seller by the ebay user name of siennacommunications.
If anyone out there has bought a car charger for thier exec then i would like to know where you bought it thanks.
I got my car charger from gpsforless.co.uk
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Cheers
Ant
Blackberry charger works
hi, I too fell into the ebay trap. So I shopped around and bought a Blackberry in car charger from vodaphone shop for £10. works a treat and doesn't look cheap.
Hope that helps
Re: Blackberry charger works
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Re: Blackberry charger works
Ineedtoys said:
The car chargers from Orange shops @ 9.99, intended for the SPV C500 / SPV C550 / SPV M500 / SPV C600, also work fine (they're HTC devices, after all).
Click to expand...
Click to collapse
I tried the blackberry charger from O2 but it didnt seem to work correctly i.e it took around 5 to 10 mins before it started to charge, if at all. So i took it back and one of the O2 staff that gave me a refund said that they shouldnt of sold it to me.
I think i will try the one from Orange, because like you said it is a HTC device. And if there were any problems then at least i could get my money back.
BTW that twat from ebay still wont get in touch with me for a refund.
Universal Charger
Got my accessories from www.gpsmidlands.co.uk.
Also selling proper mounts for the Exec
Anton.Valleyman said:
www.dsldevelopments.co.uk
is the website of a chap on here called Bryson. He's a Brodit distributor and in fact I got my passive cradle from him. I even later bought a proper USB charger from there, both work a treat.
Click to expand...
Click to collapse
I used Bryson as well. Quite happy with the solution as well. I got the brodit clip and a window stalk from him.
Motorola V3 charger
-----------But it dont work (the charger has a sticker on it saying its for motorola v3)------------
Hi, I have an i-mate Jasjar and a Motorola V3, and I can use the V3 charger with the Jasjar, the only problem is that the V3 charger has an output of 550mA and the Jasjar charger has (should have) 1000mA.
The only way I managed to charge my Jasjar with the V3 charger is to power it off with the button, closing the lid with the Jasjar in Portrait mode and plugging the V3 charger in to the mini USB port of the Jasjar, you should see the charging led of the Jasjar (in UR case O2 EXEC) turn on Ambar it will take about 5 seconds.
Hope this helps
I swapped the curly cable from my Brodit Active cradle for a regular USB cable with a cigarette light/USB adapter, but it didn't work at first. For some reason pin 4 (which isn't normally wired up in a 4pin to 5 pin plug) had to be connected to pin 5. That might be the problem you are suffering from with the non-Exec/HTC cables.
Cheers,
Steve.
o2 car charger
just seen an o2 car charger in the o2 shop today price 14.99
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
pyrom said:
Ive just ordered a hollux slim gps, a mount/cradle from dsldevelopments and a cigerette lighter to 2x usb port adapter from ebay. Only just ordered, waiting for everythign to come at the moment. The adapter is just a cigerette lighter with 2x full size usb ports on back of it, rated at 5v/7.2A, im assuming I can use the supplied usb cable that come with the exec and plug it into this to charge? (along with the gps at same time).
Click to expand...
Click to collapse
No, that's the point I was making - that configuration didn't work for me (or my colleague). The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Cheers,
Steve.
thx, i was vague (i hope ) by supplied cable, I mean the orginal exec-usb cable that came with the exec, not a generic one. The connectors on the cigerette lighter are full size usb A sockets, not plugs.
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
I have now emailed the prick i bought the car charger from 5 times (ebay) and he is still ignoring me. Do you guys think i should post his email address on here so the UNIVERSAL community can have a go at the twat, or do you think i should cut my losses and move on. After all it is only £5.49 ive lost, but its the first time ive had this trouble from an ebay seller and its winding me up. WHY WONT HE RETURN MY EMAILS?
Leave a neg feedback and open a dispute case would be my advice.
try a guy on ebay 'solwareltd'
i have bought 3 cradles from him Arkon type with car charging systems built in and they worked a treat. Xda2s and Xda2i were perfect as windscreen mounted aswell as charging.
the Exec version i have to mount upside down as the mini USB is obxtruced by the side clamps but with 'rotate screen' option in TomTom this proved not to be a major problem at all.
Trustworthy and reliable i have found this guy to be and i recommend him to anyone whos after the car options for HTC devices.
thanks
SiliconS said:
StevePritchard said:
...The standard USB cable that has a USB A at one end and the USB B Mini at the other doesn't have pin 4 wired up in the Mini B, and so doesn't charge the Exec. I had to splice open my moulded plug, and put some solder on pins 4 and 5 to make it work.
Click to expand...
Click to collapse
This is weird: I'm charging my Exec using a USB cable that came with my Canon camera and I keep the original Exec cable in my laptop bag for emergencies.
The Canon cable works fine and charges my Exec no probs. Wonder why. Maybe digicam cables also have the pin arrangement you describe?
Click to expand...
Click to collapse
The interesting thing is that regular USB cables work if plugged into a PC, it's just when they are plugged into these cigarette lighter adapter devices. My setup in the car actually has one of those with a two port USB hub plugged into it, and that required the mod I mentioned.
Cheers,
Steve.
Ebay seller has just emailed me (after 4 days and six emails to him) and admits he sent the wrong charger. He says he will send me a charger for C500 which he says will do the EXEC. I hope hes right for his sake!!
Cannot charge xda executive with car charger ,when connected nothing happens light does not go red and also the connection icon does not show
make sure you dont have a faulty charger... dont know what you are using but i believe most people use the cigarette lighter to usb converter and then just use the usb cable... also have you tried pressing the on and off swith with the charger plugged in ?
BR
car charger
Hi and thanks for the fast reply mate <yes it is a new charger from o2 .
No i have not tried the on off with the switch ,but would i still be able to charge when i am using tomtom
Whell....I use the cigarette lighter to usb adapter and usb cable ...at times i have had to quik press the on/off swith and at times plug and unplug the cable to get it to charge ....I used this as a "jump start" method only and no problems after that with using it whillst on charge (even with tomtom)..... other than that you may have a faulty charger or fag lighter to usb adapter (I never seen what a o2 one looks like).
BR
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
hi, yeah i have had this problem, and so have a few of my clients, seems that not enough juice flows through the non branded versions, unlike from o2's or Brodits cables
I found that a regular USB cable into a Cigarette Lighter -> USB Socket didn't work until I joined pin 4 to pin 5 on the USB B Mini plug. All of the adapters I had that worked, but only powered (no data, i.e. Brodit and mains adapter) seemed to have pin 4 joined to pin 5 (pin 4 isn't normally connected at all). Once I did that mod it worked fine.
Cheers,
Steve.
bluesign2k said:
Is the charger one especially for the exec?
I found normal usb chargers for phones like V3 or a GPS charger cant supply enough current to charge an exec.
Click to expand...
Click to collapse
Orange shops carry a charger intended for HTC manufactured devices (i.e. the SPV C500/M500 range) which works fine. Only £9.99.
Does anybody have them?
The reason is, I would like to use the same charger I got with a Holux GPSlim 236 but I don't dare risk it until I see the pin configurations?
The Holux comes with a mini USB car charger which would be ideal as I could charge whichever device needs charging using only one cable (likely to be the JAM that needs charging!)
davehutch said:
Does anybody have them?
The reason is, I would like to use the same charger I got with a Holux GPSlim 236 but I don't dare risk it until I see the pin configurations?
The Holux comes with a mini USB car charger which would be ideal as I could charge whichever device needs charging using only one cable (likely to be the JAM that needs charging!)
Click to expand...
Click to collapse
Use it, you will be fine. The Pin-outs are standard.
I charge my Magician with the in-car charger cable that came with a bluetooth headset.
Is it correct that this receiver doesn't operate while being charged?
Mines only seems to work while on battery - as soon as I plig in the charger, it goes off.
markmcrobie said:
Is it correct that this receiver doesn't operate while being charged?
Mines only seems to work while on battery - as soon as I plig in the charger, it goes off.
Click to expand...
Click to collapse
mine works great and is plugged in to a car charger constantly
Hi Shogunmark,
Hi Shogunmark,
What software are you using with your "Holux GPSlim 236" ? Thanks
shd
markmcrobie said:
Is it correct that this receiver doesn't operate while being charged?
Mines only seems to work while on battery - as soon as I plig in the charger, it goes off.
Click to expand...
Click to collapse
Keep an eye on this thread. I have just charged my 236 up so need to let it run out of juice.
I'll post a result when I get to test it.
Just tried with my old Nokia battery.
With the mains charger plugged in, the unit is operating as normal.
Hope that helps.
Mine works fine whilst charging
suhongdoan said:
Hi Shogunmark,
What software are you using with your "Holux GPSlim 236" ? Thanks
shd
Click to expand...
Click to collapse
iguidance v3
I have to add to my posts that when I recieved mine (without plug adapters) I tried my charger in a 2pin - 3pin adapter and the charger wouldnt work.
I plugged it directly into the 3 pin socket and it is fine. Obviously the adapter wasnt making the correct contacts.
Just as a silly question, your charger is illuminating and the green charge light on the GPS is on isn't it??
I know some suppliers of these send the adapters out with them.
Holux 236 Slim
I have the Holux 236 Slim and the GPS works fine while plugged into the chargers that came with it (both A/C and car). It will not operate with other USB chargers however. It behaves just like you said. It charges while the GPS is switched off, but does not operate with either an A/C adapter or car charger from another device (like my Cingular 8125).
Also the cable that came with the A/C adapter looks like any other USB to mini-5 USB (in fact I have used it as one for my Cingular 8125), but it will not work as a USB cable with the Holux to connect it to my laptop as a USB GPS. Holux says you have to buy their special USB cable to make that work.
You may have a bad one. Mine works both ways.
drakethib said:
You may have a bad one. Mine works both ways.
Click to expand...
Click to collapse
I am afraid that may be the case my friends.
May be an idea to phone Holux if you havent already done so.
I need an extra car charger for my 236 and have tried universal ones. These don't work unless the 236 is switched off, because the 236 mini usb is somehow differant. I think when you plug in a universal car charger in the 236 it goes into mouse mode & switches off bluetooth.I did notice that if you only touched the mini usb ends together it worked ok.plugged all the way in no. I needed to hard reset to get it working . I have contacted holux Europe to see if i can buy an extra Holux car charger. Very annoying!
Echoing what others have said, universal chargers don't work. I've tried as well. Using the supplied car charger though, never a problem. I've used it on numerous long road trips, powered on and plugged in with the supplied charger without issue. Forgot it on one trip, and experienced the same concerns as others: didn't charge whilst on on a universal charger.
And, just in case the OP is interested, I'm using Mapopolis with mine.
That may be it then - I haven't tried it with that car charger that came with it, I was having the problem while charging it with my O2 XDA Mini's charger (same connection).
Why on Earth would that be though?
markmcrobie said:
That may be it then - I haven't tried it with that car charger that came with it, I was having the problem while charging it with my O2 XDA Mini's charger (same connection).
Why on Earth would that be though?
Click to expand...
Click to collapse
No offence, but it comes with a mains charger also. Why would you not use that??
Checking the details on them both, they both are 5vdc at 1 amp.
Just going by the connection being the same doesn't necessarily mean that the output voltages are the same.
I have a standard cigarette lighter in my lorry, only problem is, its a 24v connection and would oblitorate any 12v equipment in a split second. But it looks the same !!!
I dont mean to flame you, but if a charger is supplied with something, then why on earth not use it? After all, thats what its there for.
Jerry-S said:
No offence, but it comes with a mains charger also. Why would you not use that??
Checking the details on them both, they both are 5vdc at 1 amp.
Just going by the connection being the same doesn't necessarily mean that the output voltages are the same.
I have a standard cigarette lighter in my lorry, only problem is, its a 24v connection and would oblitorate any 12v equipment in a split second. But it looks the same !!!
I dont mean to flame you, but if a charger is supplied with something, then why on earth not use it? After all, thats what its there for.
Click to expand...
Click to collapse
Why on Earth would I want to use up 2 plug sockets in my 4-way adaptor for 2 charges that are the same? (one for my phone and one for my GPS receiver).
Since either charger will charge either device, why not just have 1 plugged in, since I'll never actually need to charge both at the same time while in the house?
markmcrobie said:
Since either charger will charge either device, why not just have 1 plugged in, since I'll never actually need to charge both at the same time while in the house?
Click to expand...
Click to collapse
As I said, I wasnt trying to flame you and your point is taken but the whole purpose of this thread was to ask why it ISN'T doing what you thought it should, even though it charges. (As it should), LOL
If that makes sense, LOL
Ok then looking at the same point but from the other side, will the Holux charger charge the Wizard as it should??