Related
My ameo can fix satellites the first day i got in chicago, but from the second day, it no longer fix. it has been so for 1 week.
i use "quick gps" but the gps still doesn't work. then I changed the server where "packedEphemeris.ee" downloaded from by editing the registry, nothing changed. I've used igo,gps viewer,gps tuner etc., the satellite can be displayed around the picture of earth but they are all red and never become blue or green. ive tried hard reset but nothing changed..
I wonder what's wrong with my ameo? Is it possible that my ameo's gps module is broken? or it's just a software issue?
coolish said:
My ameo can fix satellites the first day i got in chicago, but from the second day, it no longer fix. it has been so for 1 week.
i use "quick gps" but the gps still doesn't work. then I changed the server where "packedEphemeris.ee" downloaded from by editing the registry, nothing changed. I've used igo,gps viewer,gps tuner etc., the satellite can be displayed around the picture of earth but they are all red and never become blue or green. ive tried hard reset but nothing changed..
I wonder what's wrong with my ameo? Is it possible that my ameo's gps module is broken? or it's just a software issue?
Click to expand...
Click to collapse
I have read here somewhere that the GPS Now causes problems with the GPS and caused some lock-ups requiring a soft reset. See if you can find the thread....(hint....search...LOL ) that discusses it. I had also heard that the Ameo had a GPS problem.....that thread is here too.....good luck.
Hope this helps...........Later
hdbueller said:
I have read here somewhere that the GPS Now causes problems with the GPS and caused some lock-ups requiring a soft reset. See if you can find the thread....(hint....search...LOL ) that discusses it. I had also heard that the Ameo had a GPS problem.....that thread is here too.....good luck.
Hope this helps...........Later
Click to expand...
Click to collapse
i have done soft reset many times and hard reset for several times,nothing changed..i have tried setting the gps program port to com4 or com5 and just like what i did when the gps works fine.The applications can connect to the port and find the gps but it just cant fix a usable signal..
here is the screenshot
please help..
Try GPSView
I find that the best program for getting a lock, it normally works in a few seconds. Also, make sure when you turn it on you are in a WIDE open area. You need a good view of the sky in all directions to get initial lock. Wait until its happily locked onto 4 or 5 sats before fiddling or moving.
i have used gps viewer, and i do test it outdoor in open air, but it just cant get fix in hours.
here is the screenshot while using gps view
Not sure if it will work with your software, but I find that my Ameo is far happier using com1 for the GPS port - I believe this is the software port and com4 is hardware. With com1 I can use multiple gps apps at the same time, e.g. Tomtom and Reperion. If the device has not been used for a while, it can sometimes take a few minutes to get a lock, but no longer than 3-4mins. What I generally do is set one of the GPS apps running as I'm getting my keys coat on e.t.c., then by the time I've installed the Ameo in the car and done my 'preflight checks', its got a fix and I can go.
But deffo try com1 if you have that option.
cant download quick gps
hi can i get some help. i got my new ameo but cant seem to get the gps working. when i tap quickgps all that comes up is download and nothing happens. what might be the reason. do i need to get another gps programme installed?
Yes.
QuickGPS is only for downloading sat data, not for actual GPS tracking use!
GoogleMaps is free and quite good. Microsoft Live search same.
Look for GPSView for ppc as well...
Have fun.
how do you make googlemap work? i mean the track function.
Turn off the MS software GPS management, then get the ABSOLUTE LATEST googlemaps mobile.
I think you set the com port manualy in google, com4 or com5 9600
Its best to use the free GPSView to test out the com settings first to make sure you get the right ones. When you get the right port you will SEE the gps data appear in the text box proving its working. This program gets locks quicker too.
When youve got a lock with that, quit it, then run google and use the same com settings.
wilben said:
hi can i get some help. i got my new ameo but cant seem to get the gps working. when i tap quickgps all that comes up is download and nothing happens. what might be the reason. do i need to get another gps programme installed?
Click to expand...
Click to collapse
i seem to have a peculiar issue as well. i have had my Ameo for 3 months now and GPS download (to get a fix) my TOMTOM 6 have both worked fine. now i try to download the gps data through quickgps, it says "connecting" and after a while returns an error message " connection failed, please try again later" can anyone help please?
My HW6915/Sable or whatever (and i had told myself never to end up with and Ipaq again) but got my 4 year old BA stolen...
well i am unable to turn on the GPS radio by no means, when i hit the icon on the IPAQ Wireless thing on the today menu it calls the help, (the phone BT and WiIFi they turn on or off) when i open the application i have a tab for each radio except for the gps, in the inventory it tells me that the radio is present but disabled (it was working a few weeks ago thou... ) the only different thing is that i am in Qatar at the moment and the last time i saw the GPS turn on was in France were i live most of the time (but i need more a GPS while visiting other places.... do that makes sense? )
well i have gone trought the registry but i am at loss... i have changed all values that said gps and were in 0 to 1... so far only thing that appeared is the control panel gps application (it only allows to multiplex so several programs can used the same receiver)
HELP!!!! please...
COM7 and 57600 bauds should "activate" the GPS (others configurations may not activate GPS...)
Helo, GPS man
Please see this thread:
http://forum.xda-developers.com/showthread.php?t=325823
You have details here.
Best regards,
Drahtman
Hi, again
Maybe you dont have your TomTom setup correctly. Try go to "GPS Status" this is the place where you can see the satelites signals, then press the "Configure" button (down left), then goto "Other NMEA GPS receiver" and press "Select" there you can see Gps baud rate 57600, here press "Done" and finaly on the top of the screen you will see "Internal AGPS NMEA" just press on this position and this is it. I hope this help you .... Dont panic, evrything will be fine.
Best regards,
Drahtman
Thanks to all, solved issue!
cheers
In the past, I've been using settings that works, but not a way that locks the GPS position in the fastest way, until now.
This setting allows all your applications, no matter how many they are to simulteneously use the GPS, and I get complete position lock in under 20 seconds for virtually every applications, INDOOR (near a window of course). The satelite symbols appear instantly, while the 3D fix time depends on application, ranges from 5 seconds to 20 is my impression.
I don't want to take credit for this, as I got it from here:
http://www.x7501.com/forum/X7501-GPS-Issues-1184315093.html
Basically, go to start>setting>external GPS, then set the program port to com 8, harware port to com 4, and manage it automatically. Then on all your applications, set the com port to 8.
That's it.
I was literally shocked at the speed. You can almost all it a instant locking of GPS position in all applications.
I have TOM TOM, iGO, Mobile Golf Scorer, GoogleMaps all almost instantly (in relative sense) acquiring 3D positions with the above setting.
EDIT: Please see post #51 on other combinations of settings that would also work wonders. Most of the time you should get 3D fixed in about 6 seconds. Or may be 10 seconds.
Doesn't seem any quicker for me I'm afraid.. About 4 mins from a cold boot.
Great !!!
This is the best my GPS has worker. Frist time ever in the house. One more
tip the baud rate set at 38400.
Thank you
the way i setup is:quick gps>gps tool>google maps...i usually get a lock in under 2 mins.
How do I set the com port to 8 in tomtom navigator?
I can't find it in the tomtom settings.
Bart
To set that in Tom Tom, go to main menu/preference/show gps status/configure. Then choose Other NMEA GPS receiver, set the baud rate to 38400 as mentioned above, and finally choose com 8.
shortyboy said:
the way i setup is:quick gps>gps tool>google maps...i usually get a lock in under 2 mins.
Click to expand...
Click to collapse
My QuickGPS doesn't have that option??
eaglesteve said:
In the past, I've been using settings that works, but not a way that locks the GPS position in the fastest way, until now.
This setting allows all your applications, no matter how many they are to simulteneously use the GPS, and I get complete position lock in under 20 seconds for virtually every applications, INDOOR (near a window of course). The satelite symbols appear instantly, while the 3D fix time depends on application, ranges from 5 seconds to 20 is my impression.
I don't want to take credit for this, as I got it from here:
http://www.x7501.com/forum/X7501-GPS-Issues-1184315093.html
Basically, go to start>setting>external GPS, then set the program port to com 8, harware port to com 4, and manage it automatically. Then on all your applications, set the com port to 8.
That's it.
I was literally shocked at the speed. You can almost all it a instant locking of GPS position in all applications.
I have TOM TOM, iGO, Mobile Golf Scorer, GoogleMaps all almost instantly (in relative sense) acquiring 3D positions with the above setting.
Click to expand...
Click to collapse
Confirming miraculous results using Telenav. 10 second fix vs. the usual 3-4 minutes... and from building interior! BRAVO!
ADDED: GoogleMaps -- ditto!
wgary said:
Confirming miraculous results using Telenav. 10 second fix vs. the usual 3-4 minutes... and from building interior! BRAVO!
ADDED: GoogleMaps -- ditto!
Click to expand...
Click to collapse
When I use iGO, upon the second orange LED light blinking, I got the 3D fix and my main menu turns green!!! And that is INDOOR. That is INSTANT!
My GoogleMap manage to get 8 active satellites indoor!
Shocking, miraculous!!
holy! steve, that was one heck of a tip you got there! thanks a lot for this! previously i could get a lock (using tomtom here in melbourne) in around a minute or 2. but now, it's as if my gps was running the whole time. no cold starting at all!
cheers
Robson said:
holy! steve, that was one heck of a tip you got there! thanks a lot for this! previously i could get a lock (using tomtom here in melbourne) in around a minute or 2. but now, it's as if my gps was running the whole time. no cold starting at all!
cheers
Click to expand...
Click to collapse
eaglesteve = my hero for today! I agree, it's almost as if it were always on.
Digital.Diablo said:
Doesn't seem any quicker for me I'm afraid.. About 4 mins from a cold boot.
Click to expand...
Click to collapse
Check your setting to see that you follow exactly. What application are you running that takes 4 minutes?
com8 wont appear in my tomtom settings,but will wait for a gps signal if i set it to com5.
Google maps just says initialising gps but never does.
wots up wid dat?
Smartstradamus said:
com8 wont appear in my tomtom settings,but will wait for a gps signal if i set it to com5.
Google maps just says initialising gps but never does.
wots up wid dat?
Click to expand...
Click to collapse
Did you go to start/setting/external GPS and set the software port to com 8 and hardware port to com 4 and let it manage automatically? Set baud rate to 38400.
In my Tom Tom, com8 appears as the first option, make sure you choose Other NMEA GPS device.
In googlemap, did you choose manualy setting it to com 8 before using GPS?
eaglesteve said:
Did you go to start/setting/external GPS and set the software port to com 8 and hardware port to com 4 and let it manage automatically? Set baud rate to 38400.
In my Tom Tom, com8 appears as the first option, make sure you choose Other NMEA GPS device.
In googlemap, did you choose manualy setting it to com 8 before using GPS?
Click to expand...
Click to collapse
yep! everything is setup correct but no com8 appears in tomtom,I get ril on com6,7,5 and some others.
Google is also set manually,i even gave it a soft reset after it didnt work the first time.
but no joy!
Smartstradamus said:
yep! everything is setup correct but no com8 appears in tomtom,I get ril on com6,7,5 and some others.
Google is also set manually,i even gave it a soft reset after it didnt work the first time.
but no joy!
Click to expand...
Click to collapse
That's strange. What ROM and radio are you using? What's your device?
eaglesteve said:
That's strange. What ROM and radio are you using? What's your device?
Click to expand...
Click to collapse
t-mob ameo official wm6,radio 1.50
Smartstradamus said:
t-mob ameo official wm6,radio 1.50
Click to expand...
Click to collapse
So what setting works the best in your case and how quickly do you get fixed? Does anyone with the same ROM manage to make the settings mentioned in this thread work ?
I wonder if your unit will work differently with a different ROM.
Robson, Nutty Buddy, and Wgary,
What is you ROM, radio and device? I wonder why it works so well in our case but not so in the other two cases so far.
eaglesteve said:
Robson, Nutty Buddy, and Wgary,
What is you ROM, radio and device? I wonder why it works so well in our case but not so in the other two cases so far.
Click to expand...
Click to collapse
i'm using the aku3 rom with a 1.50 radio. i wonder if the tomtom version he's using has any bearing on the com ports. for me, after configuring to nmea and setting the baud rate, the first option is immediately com port 8. this is how it shows on my screen:
gps is connected to:
com8
ril on com6:
infared port
com7:
com5:
infared port
and believe me it now locks on to satellites much, much faster. when clicking on preferences and i check the gps status, by the time the screen loads i already have like 6 satellites locked on. and then after a few seconds 3 bars switch to blue which means the gps signal is already good. and then after a few seconds the fourth bar turns blue as well. as i've said, this is the fastest setting i've seen on my unit. wish i had this when i was using powermap in thailand.....though i'm not sure if the com port settings would be same. man, that program was funky =)
cheers
I installed TomTom Mobile 7 on my iPAQ 614c but when I run the programme it says theres no GPS receiver in the PDA and i selected integrated GPS receiver in the settings. What's the problem here and how can i sort it?
Smasher77 said:
I installed TomTom Mobile 7 on my iPAQ 614c but when I run the programme it says theres no GPS receiver in the PDA and i selected integrated GPS receiver in the settings. What's the problem here and how can i sort it?
Click to expand...
Click to collapse
Hi,
The problem is that 'integrated GPS' in the eyes of TT means 'SirF Starxx' ... You just need to change the GPS to 'Other NMEA', Baud 115200, Port 6 (or 8 depending your GPS settings) ....
FYI, I set HW port on 8, and SW port on 6 in the GPS applet on the main Settings menu.
Dirk
PS remeber, there's now a dedicated forum for HP 614 here
Well that worked now it says "Awaiting for valid signal" and in the menu it says the signal strenght is weak I dont know if this is normal but if i wait i may get signal is that right?
Smasher77 said:
Well that worked now it says "Awaiting for valid signal" and in the menu it says the signal strenght is weak I dont know if this is normal but if i wait i may get signal is that right?
Click to expand...
Click to collapse
Hi,
Yep, it might take some time to get a fix, but once TT finds the GPS it's up and running.
;D
Dirk
i have the same problem.
I have the tomtom 7 installed.
But always says: waiting for a signal but never starts....
¿Are there any fix to resolve this problem?
thank you
try to go to a empty area that have open sky, the ipaq first fix can take long time (can be as long as like 5 minutes) and it does not work well in place that have a lot of tall buildings, if everything does not work, you may want to contact hp for exchange i suppose.
Make sure you select Other NEMA receiver and port 6 in configure GPS.
There are people saying flashing to unofficial rom will make fix faster but i cannot confirm that other than usually those unofficial rom will include a program call ipaq qk position that can download data to make fix faster
keyx said:
try to go to a empty area that have open sky, the ipaq first fix can take long time (can be as long as like 5 minutes) and it does not work well in place that have a lot of tall buildings, if everything does not work, you may want to contact hp for exchange i suppose.
Make sure you select Other NEMA receiver and port 6 in configure GPS.
There are people saying flashing to unofficial rom will make fix faster but i cannot confirm that other than usually those unofficial rom will include a program call ipaq qk position that can download data to make fix faster
Click to expand...
Click to collapse
Hi,
Tnx for your ROM The iPAQ QK is indeed loading the ephemeris via internet. But TT is not using these files. It loads instead the data directly from the satellites, which takes longer. The iPAQ files are used by other programs like VisualGPSce or Navio. Hence no difference in getting a fix.
Dirk
Hi everyone new here. I am having some issues with getting my GPS to work properly.
I have noticed that if I use my phone without a sim inside then the GPS locks on pretty quick.
However if I put my T-Mobile sim inside and try getting a lock on the GPS it does not work, it keeps saying locating GPS in digital compass or seeking satellites in google maps. I have tried updating GPS satelite using quick GPS too but that didn't help.
So basically the GPS works when there is no sim inside the phone but doesn't when there is a sim (T-Mobile sim) inside the phone.
Does anyone know what could be the problem and how I can get it to work with the sim inside the phone?
Phone details:
My phone is running on the generic 1.66.405.2, ROM from the HTC website. I also HSPL2ed it as it was on the Tmobile rom. However the phone is still locked to Tmobile UK.
Reply With Quote
i got the same problem, it doesnt find a satalite in google maps. but it works very fast when im outside and set the gps manually in google maps. it works with com4 and 256000 rate, but it never works when i let it manage by windows..
its the same problem i had with my old omnia :/ lucky i dont use it that much, but would be nice if i could use it when i really need it.. >.<
never tried it without sim card, and i dont want to try it.. for what should i use the phone without sim card, it would not work for google maps anyway without internet connection
But there is no option to select 256000 as the baudrate.
Also when I change the com port to com4 on the gps hardware setting and press ok to exit and go back into it to check to see if the setting has been saved I find that it reverts back to its original setting of Hardware port= None and Baudrate-4800. Why does it do that?
for me there is an option for that rate Oo in google maps i mean..
but yea, u are right, my options got reverted too :/ i dont know why..
Could you tell what settings do you use in your external GPS?
Also are you able to get a GPS lock in your digital compass, could you check? Thanks.
the external gps settings are:
programm ports: com4
gps hardware port: none, baudrate 4800
and access -> manage gps automatically ON
standard settings, didnt change them
and how to use gps with the digital compass? ^.^ i only know that the compass worked with google maps when i needed it 2 weeks ago xD
Thanks for the settings mate.
Yeah you set a location on google maps and then it locks on to the gps in the digital compass and you get the longitude and latitude displayed in the digital compass.
There is also the appearance of this green light that rotates around the circumference of the compass as you move your phone, wonder what the green light indicates..
TitanXT said:
There is also the appearance of this green light that rotates around the circumference of the compass as you move your phone, wonder what the green light indicates..
Click to expand...
Click to collapse
the green dot points towards the destination you chose. it's a heading marker.
Ah right cheers for that mate.
Btw I managed to get the GPS working, I think its just the sim reception that makes it the gps signal weaker when I try to lock on to gps satelites.
A simple solution for SEEKING SATELLITES (0) problem - Telstra HTC HD2 Google Maps
After frustrating weeks trying to have my GPS working on Google Maps, I've managed to find the solution for my "SEEKING SATELLITES (0)" problem when using Google Maps on my Telstra HTC HD2.
I've just turned AGPS Service OFF (Start --> Settings -->Location).. bingo.. it now locks to the satellite in a matter of seconds...
I hope this post will help other people who might be experiencing the same frustration I did..
Cheers!!