hi im new to WM5 i have download an application on to my pc but i dont know how to install it on to my TYTN. my pc doesn't recognise the file type. i have included the file with this post. its just a small dictator app. thanks.
copy the cab file 2003 to the ppc.the click on it it will start to install.the go to programs and find your new app.
Is that any where on the ppc, can it be on the storage card.
bobby78 said:
Is that any where on the ppc, can it be on the storage card.
Click to expand...
Click to collapse
yes it can be run from anywere.
Related
hey guys...
ok ive had few problems actually experimenting too many things kicks off the rom OBVIOUSLY...i would like to do something like this....
1.my xda II hard resets it self for obvious reasons (too many experiments)
2.there are too many programs installed on my xda II which i use most of the time, few of them are cab so its easy for me to copy them to storage card and install but many others are .exe so everytime a hard reset i have to connect the xda II to the cradle and run the software from the computer....
what i would like to do is just convert or extract .cab from .exe so that everytime i dont have to go through the same thing....this means i can also copy all my softwares as backup on my xda II storage
P.S : there are only few .exe softwares that allow me to extract .cab from it by right clicking and going to winzip option or winrar .....most of them are to be run all over again.
please help
thanks alot in advance
if it's exe which you run from the pc and it using activesync to install the program in most cases all you need to do is to chage the extention from exe to zip and copy out the cab from inside the zip file
otherwise you need an cab maker program search should give you a bunch
Rudegar said:
if it's exe which you run from the pc and it using activesync to install the program in most cases all you need to do is to chage the extention from exe to zip and copy out the cab from inside the zip file
otherwise you need an cab maker program search should give you a bunch
Click to expand...
Click to collapse
hey man...
did as you said.....will give you an example what i did...
copied noname.exe to d:/
went to command prompt went to d:/ renamed noname.exe to noname.zip
and came back to d:/ in windows and double clicked it and it says "Cannot open file : it does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
any yeah also tried right click extract here same error message
any ideas ? i am sure u do have few
thanks
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
gotcha....tools ....folder options ...view....uncheck hide extensions for uknown file types....ok ......
went to \program files\microsoft active sync on my computer went to the folders of programs installed and voilllla..... found the .cab and .arm files
thanks alot for the help mate
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
No men
get it
see in c:\archive of program\microsoft activesync
when you install a program for defect install this place.
this not happens is for this program get menu opcional installing c:\archive of program\NaMe Program
fine you only copy files .cab in you storage
the problem is when you intall the cab file this automaticaly is delete..****...
for this not happen install this before install any .cab NoDeleteCab.cab
thiss run in my Imate jam ...
enjoy...
Re: No men
SuckMe said:
get it
see in c:\archive of program\microsoft activesync
when you install a program for defect install this place.
this not happens is for this program get menu opcional installing c:\archive of program\NaMe Program
fine you only copy files .cab in you storage
the problem is when you intall the cab file this automaticaly is delete..****...
for this not happen install this before install any .cab NoDeleteCab.cab
thiss run in my Imate jam ...
enjoy...
Click to expand...
Click to collapse
that's coool...i guess i also read somewhere that if you hold click on the cab file in the pda and uncheck or check the read only box and then run .cab it wont get wiped out.....have'nt tried it though...
regards....
mtbsoft said:
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
Click to expand...
Click to collapse
ok i tried this.....but it did'nt quite work out.....i double clicked a file it opened up active sync asking for reinstall yes or no....i did a soft reset on the pda and took it out from the cradle and clicked no and cancel on that reinstall window.... where did i go wrong ?
is it like that i have to click yes and when it starts installing on the pda then soft reset the device ?
regards
zairyaab said:
that's coool...i guess i also read somewhere that if you hold click on the cab file in the pda and uncheck or check the read only box and then run .cab it wont get wiped out.....have'nt tried it though...
Click to expand...
Click to collapse
A read only CAB won't be deleted, I use it all the time.
zairyaab said:
mtbsoft said:
...when the "Reinstall Y/N?" dialog appears on the device perform a soft reset....
Click to expand...
Click to collapse
is it like that i have to click yes and when it starts installing on the pda then soft reset the device ?
Click to expand...
Click to collapse
Yes, you have to wait for the CAB file to be copied over to teh device and then it says "Reinstall Y/N?" on the device, then you do the soft reset.
If you are going to use CAB files I would strongly recommend you grab a copy of CABInst as well, it is excellent (and free).
MMm
This work in my Imate Jam
i don't know
this work in your device
but this cool
the Imate Jam autodelete .cab files when finish the install this
enjoy....
mtbsoft said:
Rudegar said:
well if it's a nativ pda exe then it cant be don and i guess some exe activesync install files may not work that way
but they will always leave a cab file in one place or another when one install it to the pda or try to
in which case i guess one could search for it
Click to expand...
Click to collapse
An alternative method (slightly long winded but reliable)...
Install the product on the device then install it again, when the "Reinstall Y/N?" dialog appears on the device perform a soft reset. If installing to Storage or Storage Card, the CAB will be in the root of that device, if installing to Main Memory you will find it in \windows\appmgr\install
Click to expand...
Click to collapse
excellent (Y)
HI.. my xda2 bottom outlet/socket/chargersocket is broken. and the repair store said they cant fix it anymore because the connector w/ the mainboard is also broken.
i have 2003SE and thank goodness i stil have a backup of my xda in spritebackup. so everytime my xda reformats, i just restore it.
but my problem is, i only have few programs/games installed. and i want to install more. can i still install more? what do i have to do? can i still install wm2005?
thanks..
you cant install a new rom without activesync i believe
but you can install programs
just copy the cab files to a sd card and run them from there
most activesync install programs from windows can be renamed to zip and opend and then you can copy out the cab files
Rudegar said:
you cant install a new rom without activesync i believe
but you can install programs
just copy the cab files to a sd card and run them from there
most activesync install programs from windows can be renamed to zip and opend and then you can copy out the cab files
Click to expand...
Click to collapse
you mean i just need to rename the installers into .zip or .rar then open it then extract the cab files inside? wow!! thanks for that information.. i will try that!!
How to install cab files from a vista pc to my ppc?
previously i was using "cab via activesync" program in xp
If u know any program plz let me know.
I dont want to copy each n every program manually..its very difficult.
Plz help me..its very urgent..my pda got hard reset..
sathya said:
How to install cab files from a vista pc to my ppc?
previously i was using "cab via activesync" program in xp
If u know any program plz let me know.
I dont want to copy each n every program manually..its very difficult.
Plz help me..its very urgent..my pda got hard reset..
Click to expand...
Click to collapse
You can use My Mobiler.
With this program, you can display your PPC screen on your PC, and simply drag and drop CAB-files to your PPC. Don't forget to delete CAB-files after install, cause they are copied to \My Documents folder.
Why aren't you using the Windows Mobile Device Center from Microsoft? It's the Vista replacement for ActiveSync and supports all of it's old features and more.
Just drag n drop the CAB's to your device and install as normal...
Thanks for replying but it will be the same..i have to go delete once again the installed cab files n more over the cab files will be installed to the default installation directory even though there r programs to change the destination to storage card..the procedure is hecktic n tiresome
Depends on your target device really. In WM6 on my Kaiser, the device asks where I want the program to be installed to. And the file not auto-deleting afterwards is just a registry setting.
FloatingFatMan said:
Depends on your target device really. In WM6 on my Kaiser, the device asks where I want the program to be installed to. And the file not auto-deleting afterwards is just a registry setting.
Click to expand...
Click to collapse
I have o2 XDA II mini running on WM2003SE....it really dosent matter which device coz there r many free programs for ppc to change the default installation directory..
but i want to install directly from my pc coz its damn easy to install many programs..
sathya said:
I have o2 XDA II mini running on WM2003SE....it really dosent matter which device coz there r many free programs for ppc to change the default installation directory..
but i want to install directly from my pc coz its damn easy to install many programs..
Click to expand...
Click to collapse
Then try to find the programs that have exe files and run them from your computer. This will be a lot easier to accomplish.
I understand what you mean... i used to install CAB files directly from my PC, i just connect my phone to my pc and i double click cab files in my pc and it install to my phone BUT unfortunately I formatted my PC and I cant find the CAB installer again.. i think i found it in HERMES forum, until now im searching but without luck!
Is there any program that creates a setup.exe file from a .cab file that works on vista?
When i had my pc with Windows XP i used PocketSetupCreator but unfortunaly it doesnt works on Vista!
wow another thread on this...but u can just copy the files on your memory either phone or card and then install and there are ways to make it so that the cab file will delete itself after u install it...whats wrong with that
bapssystupr3m3 said:
wow another thread on this...but u can just copy the files on your memory either phone or card and then install and there are ways to make it so that the cab file will delete itself after u install it...whats wrong with that
Click to expand...
Click to collapse
Ya another thread on this just becoz the problem is not solved..plz read the thread from the beginning..we know to copy cab files manually to ppc n instal but we r looking to install directly for pc to ppc without copying.
Any solutions friends
cabviaactivesync does the trick
http://www.modaco.com/content/windo...-0-compatible-cabviaactivesync-now-available/
As mentioned before, you can set .cab files to auto-delete after install, with that set, use MyMobiler to drag and drop the file, and your done.
feridoun said:
cabviaactivesync does the trick
http://www.modaco.com/content/windo...-0-compatible-cabviaactivesync-now-available/
Click to expand...
Click to collapse
Pefect, I didn't realise this had been fixed. I had problems getting it to work on Vista the last few times I tried it. This is a great time saver for when I just need to install something quickly .
how do I install a CAB file directly to the phone?
just copy the cab file to ur Storage card through a memory reader. then start the CAB file from File Explorer
OR
Connect the Phone by its USB Connection. and then copy the file to any folder on device memory then choose the CAB file from the file explorer.
Easy Enjoy
Is there a setting to keep the cab, now it deletes it after isntalling.
Riel said:
Is there a setting to keep the cab, now it deletes it after isntalling.
Click to expand...
Click to collapse
Not sure on you're specific phone, but with the Hermes/Kaiser there is a settings somewhere NOT to delete the file when installed.
I have a folder on the MicroSD card called "Install" that has all the CABs to get it working after a hard reset. The only thing I don't have are my phone contacts and the like
One day I'll get there though....
Thinking about it there could be a field in one of the many tweaking tools for the UI
wm6 does not delete cabs after install. this happened to me on wm5. don't know how to disable that feature
Elwyn M3100 said:
NThe only thing I don't have are my phone contacts and the like
Click to expand...
Click to collapse
usually activesync saves your contacts & when u do HR just name ur ppc back to the last name u used, then contacts should be added back to your contact list on the ppc.
another thing is to use pim backup software like pim backup which is free here: (can save emails/sms/mms as well!)
http://forum.xda-developers.com/showthread.php?t=299705
When I extract a cab file (and put it on my xda ii - wm6.1 rom) it is just an .xml file. When I open it on my laptop or xda ii it just comes up with html.
How do I get the cab to install?
If a cab is deleted after installtion, you can use Schap's Advance Config Tool to disable that.
Tippex said:
When I extract a cab file (and put it on my xda ii - wm6.1 rom) it is just an .xml file. When I open it on my laptop or xda ii it just comes up with html.
How do I get the cab to install?
Click to expand...
Click to collapse
You've 'extracted' too far. Programs like WinZip and WinRar by default list 'cab' files as archives. There is nowt wrong with this, as they are in a way. Except in this instance you don't want to see them as such.
Copy the .cab files to your PDA and install from there. Once the .cab files are on your PDA they are treated like an executable.
Got it
Ok, so I know some programs require you to install them over activesync. This is annoying for many reasons, most prominant of which is the fact that I'm always updating ROMS and as soon as I do that, I need to re-install them all.
So, how can I turn those applications into a nice cab to use with XDA_UC?
Thanks!
Smith
No answer? Ok lol. Well, I know that the app I have in mind places an autorun folder and all those files onto my SD card. Could I just place those into XDA_UC?
Thanks
Smith
smithisize said:
...how can I turn those applications into a nice cab...
Click to expand...
Click to collapse
Run the app on your desktop, but do not connect your device. This will create a cab file in the following folder:
Code:
C:\Program Files\Microsoft ActiveSync
Grab the cab and transfer it to your device.