Related
I decided to round up all of the cases for the HTC Universal for reference:
Piel Frama (1 case... also available on Expansys as the "Chairmans Case")
- http://www.pielframa.com/imate_jasjar.htm
PDair (2 cases, both with belt clips)
- http://www.mobilefun.co.uk/product/7749.htm
- http://www.pdair.com/scripts/main/viewitem.php?itemid=1998&pdaid=190
XaX (2 cases)
- http://www.expansys-usa.com/product.asp?code=125516
- http://www.expansys-usa.com/product.asp?code=125869
- Nutshell
http://www.tuff-as-nuts.com/209-210.html#
I have ordered the XaX cases with the intention of sending one back... I will post a full analysis with lots of pics.... it's sad that there are not a lot of pics around of these two !
BTW, here's a nice review of the Proporta case...
http://www.clieuk.co.uk/execbookcase.htm
Thanks for the summary - very useful indeed. I'm looking for something like the Piel Frama or Xax (2) case but the keyboard must NOT be covered - which I believe it is with both of these, although it is hard to tell from the photos.
I have found another case by Krusell which looks quite good:
http://www.krusell.se/product.php?s=2&product=2095
Sold here:
http://www.expansys.com/product.asp?code=127398&asource=119353
Anyone got one?
Mods:
Should this be in accessories ?
Sorry...
@page 3:
Wow... the Krusell one looks pretty good !
Hole for ear... belt clip... window for screen... Hmmmmm.... !
The only thing its missing is elastic stretchy sides to block the SD card from falling out while still being able to open the case.
case
i like the krussel or the xax #1.
am interested in feedback on the xax, as I really just want something simple to make the carrying of it easier. if I need it, i just want to take it out of the case entirely, then when finished put it back. most cases are designed to keep it inside the case. i think the clam design prevents the need for a protective permanent case, so something to make it easier to carry it would be handy.
But yes, the krussel looks good if I felt it needed protection...
So any feedback on the Xax 1 would be good, and if any body does by the krussel, let us know.
Re: case
simon_darley said:
...any feedback on the Xax 1 would be good...
Click to expand...
Click to collapse
I've had the XAX 1 for about a week now and it's just what I was looking for. Like you, Simon, I was also interested in just something to carry the Universal as I prefer to take it out completely to use it. The XAX 1 certainly does the job.
The magnetic closures make it very easy to take it out of the case and put it away. The fit is not too tight to make it difficult to remove and replace but tight enough to feel secure. It's not going anywhere. And it may seem a small thing, but I also like that the magnets make the removal and replacement of the Universal into a silent operation without zipping or velcro or snaps to announce what you're doing. It's not a big deal, but it was a nice little bonus.
The concern I had with this case was the belt clip since it is an actual clip and not anything that locks in place. My previous "belt" cases with other PDAs had the locking type clips. This one just hooks on to the belt, but it feels very secure. There seems to be no question of it slipping off of a belt and I've even used it just hooked on to jeans (without them falling down, despite the Universal's weight!) when not wearing a belt. I can see where there is more of a chance that it could come unhooked when just on jeans like that, but I haven't had that happen yet.
One advantage to the locking clips was the ability to allow the case to swivel which this one does not have. After using it though, I like the horizontal orientation and now prefer that it doesn't swivel actually. I don't have to take the case off or swivel it around every time I sit down.
I'm planning to eventually get the PDAir (most likely) for times when I want the Universal protected even while in use, but I would only use that in certain environments where I was worried that it might get damaged if taken out completely. Most of the time I plan to use the Xax.
I am not sure I get how the Xax 1 works.
Is it like a holtster, where you just slide the JasJar in?
What is the magnetic closure for, is that a tab that closes over the top opening?
How are the sides protected?
Care to post some pictures?
I'm at work, so I can't post any pictures right now (they probably wouldn't be all that happy that I was positng in the first place, but hey, it's lunch!)
It is like a holster and the JJ just slides in. As you suspected there is a leather tab that goes over the top to help protect and hold it in (though the fit is tight enough that I don't think holding the JJ in is really all that necessary.) It doesn't go completely across the top, but leaves room on one end so that you can use the headphone jack while it's in the case (as long as you put the JJ in it with the camera facing out.) Beyond that, the top is protected. There is leather on both sides, so they are protected as well. On the bottom, there's a large cut out in the middle that allows you to push up on the JJ to take it out more easily as well as two other small cut outs for the speakers.
I'll try to see if I can get some pics together later tonight.
Hi everyone,
I got the XaX #2 case today (the magnetic snap one, NOT the belt clip) and well... it's not that great.
First of all, the Jasjar won't fully close when it's inside... the leather strip that holds down the keyboard gets in the way of the screen. I've tried a bunch of different positions, and no dice.
Also, the camera hole is uncovered, but the earpiece is not so you can't use the phone when the case is closed.
The magnetic snap is nice and strong though, and the leather is of good quality.
However, in terms of functionality, it's not that great. I'll post pics later.
ikaris said:
...the Jasjar won't fully close when it's inside...
Click to expand...
Click to collapse
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Same here. I am interested in the Piel Frama case or the Krusell. Both look pretty nice and seem to have the proper cut outs for all buttons and such. Just wondering which one seems to fit the device better.
I am currently using the case that came with the iPaq 5500 series. This fits the XDA Exec perfectly and is ideal if you want to use the case for storing the Exec and taking it out of the case for use.
Simon
kelford said:
So I guess XaX may have a hit and a miss with their two cases. Thanks for passing that along because I think that is a concern.
I've wondered if the Piel Frama case will have the same "closing" issue. In some of the pictures on their website it looked like the JJ may not have been all the way closed. I had one of their cases for a Dell Axim 5 and it was of very high quality but the "closing" question concerns me.
I'd love to hear from anyone who gets a Piel Frama.
Click to expand...
Click to collapse
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
simba said:
I have received my Pielframa case a couple of days ago. The Pielframa does not have a closing issue. Also it fits perfectly. Besides that it does not use a plastic 'pouch'. That is terrible. I owned a Qtek 9090 which the case also had a plastic 'pouch' to cover the keyboard. It is a dust collector. My keyboard got very dirty and I could not get the stain away. Luckily Pielframa did not use this design.
Click to expand...
Click to collapse
Thanks for giving an update! That's good news that the Piel Frama doesn't have the closing issues that was found with the XaX 2 case. I know how well PF cases are made, so I may have to get one of these (or at least put it on a gift wish list!) since I find I like to use different cases depending on circumstances.
How does it feel in terms of added bulk? It seems designed to be on the device most if not all of the time, so I wondered how it really feels when used every day?
Take a look at this one: http://www.mobilefun.co.uk/product/7866.htm
seems reasonalbly priced
One thing though..........
Click on larger image.
first pic you see is the belt clip side
click the next pic and where you would expect to see the closing flap thingy, you see a plain flat side!?!?
Am I missing something?
Codiac said:
Am I missing something?
Click to expand...
Click to collapse
I don't understand that either. Where did the flap go?
I'm supposed to be getting pictures together (having regular PC issues at home) so I can show the XaX 1 in use, but the general construction looks similar to the one in the link, but the XaX has a bigger flap. And it doesn't hide anywhere either!
page3 said:
Just want to confirm 100% before ordering the Pielframa case - you are saying that the keyboard is NOT covered by any plastic? It isn't clear from the photo. Thanks.
Click to expand...
Click to collapse
Yes, it is not covered by any plastic.
The case does make it feel more 'bulky'. In the daily usage you could leave the it in case without the need of taking it out. I can answer the phone by not having to open the case. Of course you do need to open it to be able to make a phone call.
Hi all, I have broken the plastic part off the stylus...again :roll:
Anyone know if there is a solid stylus available instead of the poorly designed stylus supplied. Yes I know it is because they had to make it black to match the case, but I would have rather had a silver coloured stylus that lasted.
Why they didn't make a completely solid stylus I don't know; other than to generate sales of stylus pens, but they wouldn't do that would they? :shock:
I've even thought about manufacturing some to sell. Would anyone buy such a thing? :?:
funny you mention it, i had to do stylus repairs last night,
the black bit has started to come out of ppc without the rest of the stylus attached,
Tools used for repair : part of a rizla.
I teared enough rizla off to do one lap around the stylus, after licking the gum of course, then banged the black bit back in, now i cant seperate them so i think ive done enough for it to last a while longer now
Maybe you can try one of the replacement styli. The one with a ballpen on one end which translates to THE BALCK PART REALLY IS REMOVABLE so you cannot really BREAK it and not put it back. It's a ballpen cap
Jorgee said:
Maybe you can try one of the replacement styli. The one with a ballpen on one end which translates to THE BALCK PART REALLY IS REMOVABLE so you cannot really BREAK it and not put it back. It's a ballpen cap
Click to expand...
Click to collapse
I'm using that pen/stylus now and another advantage (as was noted on another post in here somewhere) is that the pen/stylus is much more secure in the device than the original stylus. I never had the original one fall out like some have metioned, but now there's not rattle either.
I don't know it the loose fitting stylus was unique to a particular branding, but I have the i-mate Jasjar.
where do you get one of these stylus pens please?
I dunno if this is what kelfor has but you can check www.ppctechs.com or www.expansys.com or any other PDA online shops.
hi all just a follow-up to this post I purchased some styli from expansys, the package was damaged and looked old, or at least poorly stored, 2 came broken the other was fine, I also bought some finger styli for my father - dads and gadgets eh! anyway 2 were missing and again the box looked old and tatty. I reported this and instead of sending me replacements they gave me a refund, they didn't seem at all bothered about it, so I took my business to eBay. I won't be buying from expansys in a hurry.
eBay on the other was excellent bought it from china and was delivered faster than expansys; top service.
PS: stylus and exec are doing fine and I'm really impressed with the xda exec update from O2, it works better than when I had the corp install running.
I purchased one of the ones with a ball-point pen in it, and it was such a bad fit that i had to use a pair of needle-nosed pliers and a lot of force to get it out again!
Rabangus said:
I purchased one of the ones with a ball-point pen in it, and it was such a bad fit that i had to use a pair of needle-nosed pliers and a lot of force to get it out again!
Click to expand...
Click to collapse
I lost one the other day somewhere around my local Tesco's!... Perhaps thats why they ship with a spare :evil:
The only one I've broken so far is the stylus-tip off of a $10 ballpoint one. The ballpoint and top's fine, but I can't use it *as* a stylus anymore. Dropped it onto tile floor in the line at the local supermarket... Oops. Meanwhile, the glue holding the black top bit in my original stylus has come loose, but it's still a tight wenough fit that the stylus works properly. Since I have an MDA Pro, I'd prefer a silver coloured tip anyway.
ther is an all metal 1 floating about, its a nice black 1, cant mind wer i seen it though, but ther is 1 out ther!
Hi I have a Cingular 8525 and as usual due to my clumsiness I have drop it twice on the cement. Everything's working fine but being a person with a mild case of obsessive compulsive behavior I am buggin......
Also if you guys are looking for a case for your Hermes you should try to avoid this style. My 8525 was securely in this case and the phone 'flew' out of it when it was knocked on the front side of the case. The phone flew out knocking the battery boor, battery, and the sim right out of the phone. Not good! Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
I have tried ebay for a replacement case and unlike all my other phone nothing is available and I mean nothing. Not even one cheesy knock off is on there for this phone.
Has anyone here looked into getting an OEM housing for the 8525?
Personally I would prefer to keep the phone in a 8525 case versus changing it out for other verients.
Sorry for the long post.....I'm sick in bed with a 103 fever so I figure that I would bug u guys
Thanks.
Derek
Looking for same for TyTN
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
try this
checkout this site. it has pretty much everything that is available.
you might want to invest in the hard metal case : )
http://www.thepocketsolution.com/cingular_8525_accessories.html
armedmetallica said:
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
Click to expand...
Click to collapse
Did you happen to adjust the hinge(simply by bending it inward slightly) before placing your Hermes inside. I have an aluminum case, and I've test dropped it, and nothing happened.
***Please not from the factory, the hinge merely "clips" over/on the other side of the aluminum housing. If you want to make it more stable you have to slightly bend the "lip" that connects to the lower portion of the housing. YMMV. I had to readjust mine once as the first time I had it way too tight, and it was very hard to get my Hermes out of the case. Now it simply closes with an authoritative click, and I know my Hermes is secure.
Anybody find a place to get the housing for an 8525 yet? There is a large (its not that large, but its visible enough to be annoying) gash on the metal bezel running along 3 of the 4 sides of the display of my 8525
im new to the forums, but my 8525 got knocked out of my hand and got pretty messed up. my "t" key has also started to lift off of the pad. i wanted to know if this has happened to anybody and if there is any replacement keyboards for sale also. can i swithc over to the tytn with the proper front keyboard? any help would be amazing.
i just bought a dummy 8525 off of ebay, Im not sure how they are made, but I am going to see if I can switch the housing
please let me know how it works, i was thinking of doing the same thing...
itlynstalyn said:
please let me know how it works, i was thinking of doing the same thing...
Click to expand...
Click to collapse
The dummy thing did not work, it isnt an actual housing, only the front buttons work, the rest are fake and do not move, there isnt even a real battery cover, its one piece. That was a waste of $10.99
still really desperate to get a new housing, anyone know where one is available?
http://cgi.ebay.ie/OEM-Housing-for-...temZ260100290172QQcategoryZ3728QQcmdZViewItem
Well let me add that I am not the seller. so don't ask me any questions, but this is a seller I have bought housing for my imate jam before...
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
BSoD_leet said:
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
Click to expand...
Click to collapse
If should be ok, but you wont have the power button on the right side... ahahhahah it would jzu be a 8525 hahah
Why dont you juz get this one instead... tho
http://cgi.ebay.ie/For-O2-Trion-iMa...ryZ15039QQrdZ1QQssPageNameZWD2VQQcmdZViewItem
armedmetallica said:
purchased invisible skin
Click to expand...
Click to collapse
armedmetallica, where did you purchase the skin from? could you please PM me, thanks!
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
http://cnn.cn/shop/tytn-grey-housing-p-1295.html
There you go guys.. I dropped my phone before christmas, and broke the latch that holds the battery door on, and I had to use some tape for awhile. I must have ordered one of the last Cingular 8525 cases, since all they have is the HTC Hermes black cases with the front camera hole.
That shouldnt be too big of deal to you guys though looking for new cases. It took about a week and a half to get here (FL, USA) from Hong Kong at Christmas time. Very good site..
spanky310 said:
Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
Click to expand...
Click to collapse
I use a case with magnetic closure..............I put the device into the case with the screen facing away from the magnet and I have never had any issue with it.
http://www.gsm4world.us/shop/cingular-8525-8525-c-210_276.html
55 bucks and your back in business
I am having the same problem sourcing the correct housing for my phone. I am from the UK and have searched high and low to find a housing for the UK equivalent the SPV M3100 (HERM100 - so the label says).
I have checked all the sites mentioned above, at cnn.cn they dont have the correct housing as the front buttons are different? and the cingular housing is 1: not a nice colour! and 2:L i dont know if this includes the mid plate as well.
Does anyone know where i can get hold of the correct housing(not silver) i dont mind the branding.
Maybe I’m just misinformed, but I though that one of the main differences between the CDMA and GSM versions of the Shift was that the CDMA/Sprint version has an annoying case permanently attached to the unit, whereas the GSM version has a separate “envelope” style case. I thought this was true even in the US.
Imagine my surprise then, when my new GSM Shift X9501 (from Amazon) arrives with the same stupid case as the CDMA version. Is this everyone’s experience (at least in the US) or am I getting some kind of new stock?
The worst part, as with the CDMA version, is that you can’t just remove the screws and the supporting posts underneath them. If you do (and I did), you have three open holes at the bottom of the unit, and the upper and lower halves of the case are no longer connected and will start to separate.
Anyone know of a source for HTC parts that could sell me screws and feet from the caseless European/Asian model?
Thanks.
AFAIK the stupid permanently attached (screwed) case was requested by FCC for US only. Fortunately I am living in Europe. The “envelope” style case is very good for me.
wow lucky me then ....
Hmm. Lucky me then. I got mine from Asia even though I live in USA.
bram1 said:
Maybe I’m just misinformed, but I though that one of the main differences between the CDMA and GSM versions of the Shift was that the CDMA/Sprint version has an annoying case permanently attached to the unit, whereas the GSM version has a separate “envelope” style case. I thought this was true even in the US.
Imagine my surprise then, when my new GSM Shift X9501 (from Amazon) arrives with the same stupid case as the CDMA version. Is this everyone’s experience (at least in the US) or am I getting some kind of new stock?
The worst part, as with the CDMA version, is that you can’t just remove the screws and the supporting posts underneath them. If you do (and I did), you have three open holes at the bottom of the unit, and the upper and lower halves of the case are no longer connected and will start to separate.
Anyone know of a source for HTC parts that could sell me screws and feet from the caseless European/Asian model?
Thanks.
Click to expand...
Click to collapse
how about we trade. I send you my Envelope Style Case and the rubber feet next to the screws and you send me the attachable folding case. I would prefer that before the envelope case. Mine is in mint condition (never really used it)
we can pay our own postage...
bram1 said:
Maybe I’m just misinformed, but I though that one of the main differences between the CDMA and GSM versions of the Shift was that the CDMA/Sprint version has an annoying case permanently attached to the unit, whereas the GSM version has a separate “envelope” style case. I thought this was true even in the US.
Imagine my surprise then, when my new GSM Shift X9501 (from Amazon) arrives with the same stupid case as the CDMA version. Is this everyone’s experience (at least in the US) or am I getting some kind of new stock?
The worst part, as with the CDMA version, is that you can’t just remove the screws and the supporting posts underneath them. If you do (and I did), you have three open holes at the bottom of the unit, and the upper and lower halves of the case are no longer connected and will start to separate.
Anyone know of a source for HTC parts that could sell me screws and feet from the caseless European/Asian model?
Thanks.
Click to expand...
Click to collapse
hey,
would you be able to use my enterbootloader app and mtty and see "info 7" command for SPL version?
sorry this is a bit unrelated. but this is the first x9501 I see.
I got one of the new X9501 US versions..
my case is attached...
super angered
Zhariak said:
I got one of the new X9501 US versions..
my case is attached...
super angered
Click to expand...
Click to collapse
as I previously stated, I am willing to swap. I was angered not to have the attached case...
lets trade
I'm actually going to hold onto this guy for a little bit and see what i like...
Once I learnt how to fold it properly not to get in my way, i didn't mind it.. too bad its brownish tan and not black to match my escalade Mwhaha
I am willing to trade.
Permanently Attached Case
Hi,
I have permanently attached case as well.
I am looking at Mugen extended battery and attached case will not work.
Are the 3 screws that keep the case attached holding anything on the Shift that would cause any issues.
When I call HTC support, they are scripted to advise you that you void warranty.
If the screws are not holding anything other than the case, is there any issue attaching the case when needed and could someone know that you tempered with the case?
phoenixnr said:
I am willing to trade.
Click to expand...
Click to collapse
Sorry, I havent check the thread for a while. I am still able to trade the Envelope
for the attached case.
Let me know if you still want to trade. I am keen on having the attached case
For those that want to remove the attached case:
If you take the three screws and grind down the sides of the heads to match the same diameter as the metal spacers, the screws will fit back into the holes under the leather case and tighten back up. You obliviously have to remove the metal spacers for this to work. Take your time, the screws will shave down rather quickly, especially on a grinding wheel. I've found if you don't put the screws back in, the two halves of the plastic case of the Shift will always be loose... doesn't seem safe to me. The only issue that I'm still having is trying to find the rubber "feet" that would cover the screw holes where the leather case was. If anyone knows a website to find a replacement battery cover, one could pop off the feet from that and stick them back on the Shift. If you try to put the screws back in without making the screw head diameters' smaller, they will get stuck about 1/4th of the way into the case, and will actually dig into the plastic, making it a hell of a chore to remove them again.
There is an easier way guys, swap screws, all the case screws on the shift have the same thread type and length, I swapped the top 3 wide head screws for 3 of the small head screws from the battery compartment, There are 4 screw holes at the 4 corners of the battery compartment, I used all but the bottom right hole(too close to the case) You need a T6 Torx driver and you have to put them in at a little bit of an angle but they fit fine.
I am also going to try to get the rubber feet to fill the empty holes left at the top. I am hoping HTC can provide these.
G
Any word on this?
Really hating the leather case... But i dont want todo anything until I find the rubber feet
Don't know if they have them small enough, but I have bought for PDAs.
http://www.allelectronics.com/make-a-store/category/545/Rubber-Feet-/-Bumpers/1.html
Hi Guys,
I ordered one of these and it arrived this morning, A500 fits in snug as a bug in a rug!
Quality is really impressive, and all the cut out slots for ports are in the right place.
http://www.amazon.co.uk/Navitech-Ex...K9WE/ref=sr_1_3?ie=UTF8&qid=1306931117&sr=8-3
£14.99 So I think is the cheapest fitted case around? Thought I would share for all!
Dan
Could you post a couple of pics? I was thinking of getting this, but the two photos they have of it on amazon don't seem to be of the same case. Also it looks like they flipped the second one cause the back camemra is on the wrong side.
Edit:
Actualy after comparing the front shot is of the PDair BX2 and the back shot is of the PDair BX1 that has been flipped and had the PDair logo Photoshopped out.
Sent from my A500 using XDA Premium App
are the 16mb and 32mb tabs the same
external dimensions?
secularhuman said:
external dimensions?
Click to expand...
Click to collapse
16gb and 32gb are identical in size -
height - 260mm (10.24 inches)
width - 177mm (6.97 inches)
thickness - 13.3 mm (.53 inches)
Hope it helps!
Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave
davmyc said:
Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave
Click to expand...
Click to collapse
Hi there...
I have this case as well.
No. You'd have to remove the unit from the case to access the micro sd card.
the other thing that is not great about the case (which I'm going to modify) is that the leather around the bezel actually covers the edge of the screen, not just the border...it's a little smaller than I'd like. Why?
If you use the stock Android Browser, there is a great feature - Quick Controls - that allow you to slide your finger from off the screen onto the screen and bring up browser coltrols exactly where you need them. SUPER trick and very easy...
..and this case does not allow you to use this feature...
So, yeah. Modifications coming. When done I will post pics...Hopefully by the time I buy the perfect follow up case, they have thought of these things...
got mine today, shipping only took 1 week
Nicely built. Split keyboard still easy to use. Looks very smart.
It does allow the tablet to
slide down a little so the rfcamera gets covered up, bot a little surgery will fix that. If you use it upsidedown,
it doesnt slide down enuf to over the camera or the keys at thr screen bottom.
Secular
so...which one of the two different photo is????
Navitech case review
After having this case for over a week, I'm noticing a few things that are beginning to make me shop for another case...
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
2) The more I use it, the more the cheap leather (or..whatever it is...) is loosening up and is getting a bit..baggy around the screen.
3) I truly wish it had 1/8 of an inch more around the screen area to be able to use the gestures with the stock browser because I LOVE the way they work.
At this point, I'm probably going to start modifying it so it serves it's protection purpose until I get the next case. I am already starting to shop...
If you can live with these issues, by all means go ahead and get one - overall it's not that bad if you are willing to do a few mods to it...But be forewarned. You are getting what you pay for at this price...
try upside down for item one
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.
secularhuman said:
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.
Click to expand...
Click to collapse
...and? there's ONE hole in the border / frame of the case that is JUST big enough to see the front camera when it's in the perfect position. If the camera is not lined up with that hole - no workie...
Also, if you put the unit in upside down, not only does the FRONT camera not work, but the camera on the back, the speakers, and the jack for the dock are covered as well. Also no workie...
Also does not address the loosening up of the flap issue..I've only had it a week and ALREADY it's pretty loose and allows the unit to slide Very Easily inside the case...
Ummm...Do you work for Navitech by any chance?
no I dont work for them
Ummm...Do you work for Navitech by any chance? [/QUOTE]
no but I have one. when upsidedn the rfc works as do the speakers, the ffc no.
maybe some velcro would be an easy fix.
secular
the acer branded case also slides a great bit after a short time, but it is a very thin material that provides almost no drop protection.
At least this is leather ....
The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore
Thanks for the idea
gerke said:
The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore
Click to expand...
Click to collapse
The double sided tape works great!
Secular
I have had this case for 2 weeks and loving it so far. Great fit.
The flap that holds thetablet snug did get loose as people mentioned. Iused a 2x1 inch piece of industrial velcro to creat a latch. Works like a champ and i can remove the tab when needed.
I've had this case on order from amazon.com (U.S.) and so far although they claim they shipped it June 6 I've seen no sign of it. No tracking info was provided. After contacting them through Amazon, I got a response stating that they had had trouble with shipments to the U.S., and in exchange for refunding my shipping fee they asked I wait another week.
Waiting, but not impressed (with Navitech) so far.
I had a problem with my shipment as well. They've asked me to wait a week longer and they (because the shipment never came) asked if I want a new product or a refund.
I asked for a new product and they sent it today via first class airmail.
It's not their fault that post offices keep losing shipments. Actually we're both unhappy. They had to ship two products instead of one and I had to wait a month for it.
C'est la vie
Well mine finally showed up today. Battered and dirty in a big mailing folder not a box. The case doesn't seem any worse for the trip it had taken, and my A500 is having a nap in it right now.
The flap that tucks under it to hold it in the case is very soft leather and doesn't keep the tablet from slipping a little up or down. Still, this case should be find to carry my A500 out and about in and keep me from worrying about scratching the thing.