Hi everybody,
I just can't seem to reset my K-Jam. I tried it a dozen times but it still is a soft reset. Ok before everybody get's angry: I know how to hard reset (hold the two side top buttons and press the reset button). I tried it in different timings like first holding down the two side top buttons then pressing the resetbutton and holding it for almost a minute. Or first pressing and holding the reset button and then the two buttons but it is always a soft reset.
I guess it is a soft reset because I don't get the calibrate screen thing.
Any tips here because I want to get rid of the slowdowns from the virusprogram....?
Wouter
Hi,
I had the same problem. Theres a facility in settings called 'Clear Storage'
start>settings>system>'Clear Storage'
this actually does a hard re-set.
Thanks Webster,
I didn't think of that one! That did the trick!
Wouter
Hold down the Comm Button and Voice Button continuously while tapping the reset hole.
As long as you keep holding down the two buttons, the screen will go black and soon prompt you to hit Send to hard-reset (wipe the unit), or any other key to continue with a soft-reset (reboot).
Thanks Beyondthetech,
I'll try that next time when I need it :wink: .
Great blog you have! Has been very useful in making up my mind.
I'll install TT 5 later now I know how it can be done. :lol:
Wouter
Just a small update
Just to let you guys now. I finally found out the proper way to hardreset.
The trick is not to let go of the Communications and Voice Command button until you have stopped pressing the soft reset hole. Just wait with releasing the two buttons until there is a message on the screen asking you to press the Sent key to hard reset.
Another funny thing is that you can restore a backup (made with Sunny Backup) on another K-Jam device. It still runs. This came in handy because I exchanged mine for another because of some hardware problems.
Wouter
Which one is the "Sent key".
the telephone "call" key (green handset) (left side)
Hi all,
I have a strange button issue on my MDA Vario.
All works as it should until I turn off (with power button or times out). When I turn it back on only some of the buttons work - namely the side hard buttoins (Camera, comms and voice memo) as well as the top 2 hard buttons (e mail and t-mobile). The center button in the D pad also works.
The up/down/left/right button and the soft buttons do not work and neither does the slide out keyboard or the phone pick up/hang up.
Now ... when one of the working buttons is pressed it wakes the rest up and it all works fine until the next power off. Tapping on the screens works fine all the time but does not wake the buttons up.
As a work around I have set a "working" button to the today page and use this to wake the other buttons up but it's a real pain.
I have updated the ROM (well worth doing) but it made no difference.
Any one got any ideas?
Everso
Any one got any ideas?
Oh dear god am i annoyed by this.
In my WM6 Wizard, the bottom two soft+hard buttons work with like a half or a second lag. I cant understand why this would happen, as all the other buttons work like in a flash.
Press hard or the soft key -> 0.5-1 second later the soft button responses -> action
Am i alone with this thing or are there others?
HI! I HAVE A VERY BIG PROBLEM!! Do you have any idea what this could be?!?
Suddenly, this started; when I push the joystick on the phone or arrow buttons on the KB, the phone just starts clicking.... continuously, like I would constantly push the joystick or arrow. I get stuck in word, task, calendar or any other application I am currently using and need to do soft or hard reset. Even after soft or hard reset the issue is NOT solved. It seems that other buttons or screen does not cause this.
In addition: I am able to turn off screen and the clicking stops. When I turn on the screen the clicking resumes/continues.
Recently I am having problems with my phone, and am wondering if it is a software or hardware problem.
I have tried loading the TNT4 rom & WS5SE roms (this is a g4), and there is no change (im on the Tnt4 one now).
The touchscreen works okay, but the soft key buttons do not. The right bottom one is okay, the left one triggers the right one, the send button show the letters "uytga" on the phone screen when i press them, the end button shows "mn" or something, the camera button works perfect, the comm manager button is the same as the voice button (even when i map it with a program it says "button 4").
It even happens on the soft keys on the keyboard when i slide it out.
Also I used Start-sSPL to put the roms on. Is there a way I can get the OEM one back on or fix the button problem?
Any help will be appreciated.