PROBLEM: sharing folder with WiFi... - JAMin, XDA Neo, S200 General

Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?

So just to clarify. You have a laptop connected to a wifi router, and your Jammin is connected to the same router. But your internet connection is obtained through a standard modem on your laptop. Am I right with all of this?
If so then sharing a folder on your laptop in order for you to browse, stream, rename, open, etc. from your Jammin is a piece of cake. Simply change your sharing values of the folder on your laptop. It should then appear on the network folder on your Jammin. I use Resco Explorer on the Jammin ... I couldn't get the standard file browser to work.
As far as sharing the internet, I'm pretty sure it can be done ... I did a similar thing with bluetooth a few years back but it was messy and unreliable. Can't help you much further sorry.

Related

Using Activesync v 3.7.1 to internet via cable router

Hi there,
Don't know if this is even possible I've read all the articles I could find here and tried Microsoft web pages. If you can help ill most appreciate it.
(Apologies if this has been answered please let me know the link...)
My internet connection (at home) is via NTL cable, My 4 pc's connect to the internet via a Linksys router, each PC has a private IP address along the 192.168.1.x subnet which NAT to the router for internet access - all transparent.
I do not have a proxy server at home, connection is established because each PC uses the router as a gateway for internet access.
My XDA2 refuses to talk to the internet via Activesync. I can confirm that my handheld connectiviy text bubble says that the internet connection is pointing to the PC connection. the paramaters in Active sync passthorugh are set to internet - But it just won't work.
I even tried configuring the proxy option to the routers address no avail.
The XDA wants to keep defaulting back to its GPRS connection.
At the moment I have disabled the phone completely to stop it dialing out whilst I am testing.
I'm out of ideas can anyone help !!!!!!!!
I managed to fix this problem. I set up a personal proxy server from
http://www.youngzsoft.net/ccproxy/ its an excellent proxy only 815k in size and its intelligent enough to understand NAT'd IP addresses etc for connections to routers.
All I had to do was to configure the XDA 2 work profile with the proxy server address then the internet passthrough worked fine.
For Bluetooth access (I use a D-link USB bluetooth adapter). I had a problem getting the XDA 2 to launch the bluetooth connection under the activesync. I used the excellent pocket bluetooth tools
http://216.239.39.104/translate_c?h...t+bluetooth+tools&hl=en&lr=&ie=UTF-8&oe=UTF-8,
after installing this the connection worked straight away with BT internet access as well.
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Hi I am new to this forum, and like the person above am trying to find a way to browse files on my PC through my XDA2 (i-mate).
I am connected via bluetooth to my PC, activesync is working fine this way, as is internet browsing on my XDA2 using my PC's internet connection.
All I wan't to do is be able to sit away from my PC and get files from it to the XDA2 via bluetooth.
Apparently using Resco File Explorer and a wi-fi connection you can set up a network with your PC, but when I try this with Bluetooth it doesn't work - surely bluetooth can offer the same file sharing - just slower???
Please help us if you know a way!
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
essojay said:
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Click to expand...
Click to collapse
sorted!!!
BR

Help setting up wifi router

i have just bought a netgear wifi router and i can not get it to work. does anyone know of a guide to set it up?
RE
Hi!
Netgear haa a very good forum for its products. You can try there for better luck
i found it no help!
getting there now. well i can acess my computer via resco file explorer.
just now need to set the internet up
2 questions,
Do you need to set up the router ? Or do you need to set up your ppc ?
prob both,
i can browse my desktop pc wirelessly using resco file explorer but i can not use the internet.
so it still could be both, i still can not connect to activesync, probably if i can do this i would be able to connect to the net as i can when the blue angle is docked
robboy said:
prob both,
i can browse my desktop pc wirelessly using resco file explorer but i can not use the internet.
so it still could be both, i still can not connect to activesync, probably if i can do this i would be able to connect to the net as i can when the blue angle is docked
Click to expand...
Click to collapse
You might want to down load vxUtil from http://www.cam.com/vxutil_pers.html with this util you can most likely find out what is wrong. You should not need activesync to connect to the Internet, **IF** your router connects to the Internet.
To activesync with the PC you will need to enable NetBIOS over TCP/IP on the PC. Then you'll need to be able to PING your PC by name. And both the PC and the PPC need to be using the same DHCP server, and in the same network.
As you can reach your desktop, have you set both settings to "Work" or some form of this on your PPC, and checked just "This network connects to the Internet" under proxxy settings for the work connection? Each version of the PPC OS seems to change the names here just a bit.

WiFi issues

1. hi is it possible to active sync over wifi connection.
2. is it possibile and if so how to network the wizard with my other computers in the house.
3. can i play media files audio/ video through my vario over a wifi connection if networked.
4. is file transfer possible over wifi from my desktop/ laptop to my vario.
please help. many thanks.
1. No. Activesync 4/4.1 does not include syncing over wi-fi any longer.
2/4. Depending how you have your wi-fi setup at home, you can map a drive on the PDA. I use Resco File Explorer and it is quite easy to do. Just this morning I mapped to my PC and grabbed a file I wanted. Copied it right to the wizard.
I don't think you can map a drive on the PC to represent the PDA, though. I haven't tried this since if I am at my PC, I would have the PDA with me and use Activesync.
3. Don't know this one.
many thanks for that
I'd like to add a question:
5. Can I use the WiFi internet connection on my Qtek 9100 on my laptop?
(qtek connected via WiFi + Laptop connected via USB = internet on laptop?)

Activesync WM5 (JAMin) over WiFi

Guys i have searched over 1 hour in the Internet but no solution sorry but still i cant get connected.
If someone please Post Step by step procedures i would be very thankful
here is some useful but not completed websites:
The Best one seems to be this but it is very old:
http://www.microsoft.com/windowsxp/using/networking/expert/bowman_september24.mspx
Result from other Sites:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=453&more=1
http://www.modaco.com/index.php?showtopic=237804
Drop it. No way to do it. I've posted here just a few weeks ago, tried everything, with no luck. It simply isn't possible with the latest ActiveSync 4.1, and the older one 3.8 which has the wifi functionality, is not compatible with WM 5.0.
So forget about it. You can connect through wifi, but no synching...
Thank you very much but what is the benefith to connect through wifi?? i cant even send a file or connect to internet!!! At list give me a clue to conect Internet through WiFi & PC. but i think if we do the right Setting for IP in WiFi we would get connected some how....
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
krale said:
Connecting through wifi gives you some good things... FOr one, I can stream all my mp3, and movie collection through wifi from PC to my prophet in real time... Yes, even movies work perfectly. So you don't have to keep your mem card full. And you can transfer files to/from PC with little problem.
To set it up, just set up a network on your pc, turn on wifi. Your prophet will discover it, and you can connect to it. Then you need a program like PocketLan, and you can set up a network folder in your prophet which lets you view all the folders you have placed on share on the PC. (so you have to place some folders on share).
I haven't tested sharing an internet connection, but it should not be a problem. I will test tomorrow or tuesday, and let you know.
Cheers.
Click to expand...
Click to collapse
Resco File Explorer will let you add "share drives" also. You can add directories or drives.
Upss...
It seems that sharing internet connection through wifi is NOT possible with WM5... They have just ruined everything with this stupid upgrade of activesync!
Anyone aware of a work arround so my PC internet connection works on my PPC connected to it with ad-hoc wifi?
as i said i think with IP configuration there might be a way to share it. or i think XDA fellow should program a Stack for this issue on activesyns4.x
Internet over Wi-Fi
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Perhaps you are right Acer, since I was not able to fully test it with your specs.
I have a company cable network LAN, and a wireless adapter on the laptop which is free. But unfortunatelly, I was not able to set up internet sharing of the LAN, since it goes over a Network Bridge. Anyone now how this could be enabled?
THanks for the info Acer, its helpful...
Re: Internet over Wi-Fi
acer175 said:
you definitely need to do your research better
I have a wi-fi network at home and connect my Prophet to the internet without any problem, and so do thousands of other users.
If you have a wi-fi router, just set it to use the encryption supported by the Prophet. I found that using an authentication of "WPA-PSK" and encryption of TKIP works perfectly.
If you're setting up an ad-hoc network between a pc and the Prophet, you need to enable Internet Connection Sharing on the PC with the internet connection and voila'
You do not need activesync over wifi to use internet on the Prophet, just use it as a normal pc on wi-fi network. However what they have not been able to do till now is enable Activesync over Wi-fi for synchronisation.
Click to expand...
Click to collapse
Dude thanx i have a laptop and i have made an ad-hoc network between my pc and the Prophet, also i have shared my dialup connection but it is not working, if possible would you please explain step by step settings?
do you have Windows XP on your laptop?
acer175 said:
do you have Windows XP on your laptop?
Click to expand...
Click to collapse
yes i am using XP home Edition and my laptop is Averatec 3200 series
Just go to properties on your dial up internet sharing and set share this connection. i thinks thats about it. i've not use it for a long time, but if I remember correctly that's about it. you have to share it with your WI-FI adapter of course.
Some WI-Fi card can configure this automacticly. Like several I seen. You can set it as a router, and you're good to go.
BUMP @ acer175 ..where are you dude??!!!
Hi lover. Sorry, I thought Munyuk81's response was enough.
Anyway, on Windows XP, open Network Connections, right-click on your dial-up/ADSL connection, selet Properties.
Open the Advanced tab, you should have an Internet Connection SHaring section. Enable "Allow other users to connect etc, etc...". Select the wireless network adapter if given the option. Click YES if asked to change the IP.
Next create a wi-fi network using the XP utlities or your card's utilities. Don't touch the IP address of the wi-fi card.
Next on your Prophet, enable Wi-Fi and it should discover the network by itself. If you set a key in the step above, it will ask you to enter it.
@acer175
Do you know how i can share my Lan internet which goes over a Network Bridge? WHen I removed the Lan from the Network Bridge, I could see the options for ICS, but there was no internet to share, as the connection was lost. Adding it back to the network bridge restores the internet connection, but removes the option for sharing it with the other (wifi) card...
Anyone?
i haven't tried it myself, but thinking logically, when you add a connection to a bridge, it loses its individual attributes. You have to check the properties of the bridge, and check if there are ICS options there, however I do not think that XP allows that, but you can try.
ALso see if this may be helpful:
http://www.practicallynetworked.com/sharing/xp_ics/
thanx acer175.
i have connected my PPC to PC but still no internet sharing!! also i have shared some drives and folders in my PC but with resco explorer i cant see any of them
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
acer175 said:
@lover
switch off WIndows Firewall on the Wi-Fi connection if it is enabled
Click to expand...
Click to collapse
the file sharing works perfectly (thank you\) but no internet conection when i start IE browser it says : The page cannot be found. check the name and try again ?!!!
what is your settings in
Start.Settings.Connections.ConnectionsAdvanced...Select Networks?
both of them are My Work Network

File sharing over ad-hoc wifi

I just bought a usb wi-fi dongle so that i can connect to my wizard in office over wi-fi. Can anyone give any pointers how can i do file sharing in ad-hoc mode in such a way that i can access files on my office PC through my wizard without having a separate access point.
I tried connecting through ad-hoc mode and my wizard connects to the PC but doesn't show any shared folders and cannot find my PC (not even through IP) when using resco file explorer...
shantzg001 said:
I just bought a usb wi-fi dongle so that i can connect to my wizard in office over wi-fi. Can anyone give any pointers how can i do file sharing in ad-hoc mode in such a way that i can access files on my office PC through my wizard without having a separate access point.
I tried connecting through ad-hoc mode and my wizard connects to the PC but doesn't show any shared folders and cannot find my PC (not even through IP) when using resco file explorer...
Click to expand...
Click to collapse
To browse network folder on your HTC you should install some additional software. I've tried PocketLAN to share files between notebook and HTC via Wi-Fi. It've been working flawlessly. But you have to set IP and network mask on your HTC as it's in the office network.
Hmmm, i just installed pocketlan...I saw that my PPC gets an IP of 169.254.11.69 (subnet mask 255.255.0.0) and mycomp gets an ip of 169.254.87.204. Now am able to ping my comp using pocketlan on my PPC but am not able to map it. Whenever i try to do it, it says network address/name cannot be found.
that's strange What OS do you use?
You don't need any 3rd party software...
The Wizard will do this with it's built in file explorer.
Windows XP is the OS...
Did it finally after umpteen number of tries...Turns out ICS is necessary even for simple file sharing even though i do not want to surf net thru my PC's connection. And I also had to unplug my lan cable as the IP windows tries to assign once ICS is on is 192.168.0.x and this range is already used by my lan thus causing a conflict...Anyways, its better than nothing..I just wanted a faster medium to transfer files than BT which is painfully slow..
Any idea when are they going to provide an upgrade to BT 2.0 for wizard?

Categories

Resources