Related
I put smartskey and omap onto my mda...it wasn't working properly so I uninstalled it....
there are no visible signs of the programs on my device but everytime my device wakes up or powers on i get this:
Notification Error
Cannot execute "windows/start/menu/newfoldr/smarskey.exe"
then behind it i get
Notification Error
Cannot execute "smartskey/snartskey.exe"
I just want this to be off of my device since it has been so much trouble. Can someone please help me figure out how to get rid of this without having to do a hard reset?
\windows\startup
remove it from there...
and also remove the smartskey folder where you installed it from...
i did that...nm i ended up doing a hard reset. I deleted the program and folder...there were no visible traces...idk what happened
I had this problem too. Extremely frustrating especially since I had removed all traces (so I thought) of smartskey.
Turns out, Smartskey leaves behind a notification message that gets queued up even if you remove the program and it's shortcut from the startup menu. You need a program like MemMaid to clear the notification message.
Annoying Smartskey issue, PLEASE help
nandaiyo said:
I had this problem too. Extremely frustrating especially since I had removed all traces (so I thought) of smartskey.
Turns out, Smartskey leaves behind a notification message that gets queued up even if you remove the program and it's shortcut from the startup menu. You need a program like MemMaid to clear the notification message.
Click to expand...
Click to collapse
I also have this problem on a Wizard and a Prophet. Even though you remove 'all traces' of Smartskey it keeps coming up wuth the queued notification message. Does anyone have a fix for this?
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Re: Annoying Smartskey issue, PLEASE help
Stabilo said:
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Click to expand...
Click to collapse
MemMaid is WM5 compatible. I use it on my Wizard without problem.
EDIT:
Re uninstalling smartskey - I thought there was a specific way to uninstall it mentioned in the smartskey thread? Does this not work?
Re: Annoying Smartskey issue, PLEASE help
Tezcatlipoca said:
Stabilo said:
I tried using MemMaid demo about a week ago but it wouldn't install on the Wizard. I might try it on the Prophet. Can anyone confirm that if I buy the full MemMaid software it will remove this annoying issue i.e. does it run & install on WM5 XDA's?
Click to expand...
Click to collapse
MemMaid is WM5 compatible. I use it on my Wizard without problem.
EDIT:
Re uninstalling smartskey - I thought there was a specific way to uninstall it mentioned in the smartskey thread? Does this not work?
Click to expand...
Click to collapse
Just tried MemMaid (demo) on the Prophet. It cleared the problem straight away. Went back to the Wizard and MemMaid also worked on that, both machines now clean of the Smartskey notification message. Now that I know how to remove the message I might play around with Smartskey some more. The Smartskey concept is quite good but it seems to interface badly with Omapclock (might just be Microsoft's buggy notification software).
MemMaid also looks a good utility for $15. I think originally I might have been trying to run the MemMaid (installation) exe from the Wizard rather than installing over ActiveSync.
hi, i use smartskey and omap together and they both work beautifully with each other, my device is quicker thanks to omap clock and the wizard is excellent as a one handed device thanks to the shortcuts it creates just like the prophet device where it creates ur soft keys to be the start button and OK button as well.....its like having 2 extra keys just like the prophet.......you can also use the software Check Notifications 1.9 by ScaryBearSoftware to get rid of the smartskey.exe from the notifications queue......
MemMaid v. Smartskey
I installed Smartskey, and it was unhappy. Then the bloody "Notification Error..." started popping up consistantly.
Reinstalled Smartskey, no help.
Uninstalled, No Help.
Looked it up here, Installed MemMaid
Problem Solved.
BTW- Reinstalled Smartskey and OmapClock and they work wonderfully. My initial eror was installing to the SD Card and not main memory.
Thanks for the fix.
I have an O2 xda Neo (PM300) running Windows Mobile 5 Pocket PC.
All of a sudden I noticed I no longer receive notifications or reminders of appointments or tasks on my "today" page nor any audible sounds. Even though I have:
1. Enabled sounds for reminders in "sounds & Notifications"
2.checked the "display message on screen" and "play sound" boxes in the "notifications" submenu
3.Checked the "set reminders for new items" box in the "appointments" sub menu in "options" in "calendar" (and done the same for "tasks"
My clock is correct. I have soft reset the unit a few times, I have set sample appt's and tasks and attempted to set a reminder for 5 minutes prior just to test and still nothing...
It was working fine upto maybe a couple weeks ago and just stopped working one day. I am at a loss, as the sheduling/task/appoitntment aspect is the main reason for me going the pocket pc route.
Now, I have no advance warning of tasks or appt's other than the calendar displaying the next few or so the day of or day before.
Very frustrating!
Look for Check Notifications ScaryBear Software. This program might be you solution
I had the same problem this week.
In my case it was either the (failed) installation of pocket clock or pocket max phone alarm that did it.
I loaded a previous week's sprite back-up (program part only) and that fixed the problem. I have not tried to reinstall pocket max phone alarm.
Will not reinstall pocket clock because that did not work anyways.
Robin
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
davetribe said:
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
Click to expand...
Click to collapse
I have exactly the same problem - but unfortunately cannot remember when it showed up the first time. I do not want to try a hard reset, also checking pocketmax seems that they only advise to do a lot of reinstallations. And I worry the problem will show up again later as I want to continue using phone alarm. I rather would like to change registry entries.
- Anybody has some idea what to change?
- I found an empty string value WAVEFILE in HKKLM\SOFTWARE\Microsoft\calendar\reminder - can anybody tell me their value here
- same empty value is in HKKLM\SOFTWARE\Microsoft\Tasks\reminder
Thanks Hase01
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Way2go said:
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Click to expand...
Click to collapse
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
hase01 said:
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
Click to expand...
Click to collapse
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
Just download my Free Task Manager found here:
http://forum.xda-developers.com/showthread.php?t=280104
1) Launch it on your pocket pc
2) Select Notifications tab
3) First try to remove duplicates
4) Try to remove SCRIPT:0x000...
If it still doesn't work, select all of them and disable them.
Do a soft reset and create a new notification, if it works, I suggest you to enable only the necessary notifications, so those like:
CALENDAR.EXE
\Windows\calupd.exe
replog.exe
calnot.exe
clocknot.exe
and delete all [none] notifications
Cheers,
.Fred
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
hase01 said:
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
Click to expand...
Click to collapse
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
dotfred said:
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
Click to expand...
Click to collapse
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
hase01 said:
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
Click to expand...
Click to collapse
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
hase01 said:
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
Click to expand...
Click to collapse
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
dotfred said:
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
Click to expand...
Click to collapse
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
hase01 said:
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
Click to expand...
Click to collapse
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
dotfred said:
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
Click to expand...
Click to collapse
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
hase01 said:
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
Click to expand...
Click to collapse
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
dotfred said:
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
Click to expand...
Click to collapse
I got the notifications back. I think it was basically repaired by installing alarmtoday again from backup. I think the problem could have been caused by the new sktools version. Strange.
B.t.w. do you need a beta tester for oyur TM on IPAQ. Then just sent me a pm
Hase
Ok. I have the same problem recently.. unsure what is the problem, but it seems that softreset *cause* (not solve) the problem, some what.. during my testing.
Anyway, I tried a few solutions listed, and the easy one is to use the TaskManager (freeware) to find the notification with 'Status' is in 'signalled'. These are passed notifications and it seems that these are causing the problem. As soon as I've removed them, the problem seems to have solved.
Then, I tested it again, by removing the 'Init_tray' from the startup and do a softreset. I tried it again, and it doesn't work. I check again on Task Manager, those 'signalled' stuff are back.
Hi all,
I'm running the swiss version of the Trinity, it's called v1510 and I still run the original WM5-Version on it.
Now I found out that nothing happend, when I try to open a pic or a video. All what happens is that the screen flashes shortly, and that's all. When I try to start the application pimg.exe (I think this is the correct program?) nothing happens.
I have no problems to open pictures with other apps like Xnview or SPB Imageer, but not with the build-in pimg.exe. It wont be such a problem for me, but the point is that I cannot add images to my phone-contacts, as nothing happens when I click on "add image". I suppose it trys to open pimg.exe, which is not working properly.
Therefore I'm searching of one of those solutions: how can I force the trinity to set Xnview or SPB imageer as the default viewer? So, that it starts one of those programs when I wanted to add an image to my contacts?
Or: what can I do to "repair" the original pimg.exe?
Thanks in advance & best regards
JoeSac
if you backup the data you wanna keep
then you can try out a hardreset to delete regs and such
if a reg got corrupt for that program
have u installed anything lately. mine did the same thing and it was to do with a direct push mail client
Rudegar said:
if you backup the data you wanna keep
then you can try out a hardreset to delete regs and such
if a reg got corrupt for that program
Click to expand...
Click to collapse
Hi,
does this work with SPB-Backup? This is the only backup-software I have. In this case I suggest I should not backup System-Data, as they could be corrupt, am I right? Well, maybe I will try a hard reset...
@hoyler30589: Well, I installed a few programs, but I absolutely dont remember from what time on the pimg.exe did not work... However, I did not install stuff regarding direct push clients.
Best regards
JoeSac
Hi all,
after performing a hard reset I re-installed all my former softs, and therefore I was aware of a software called "Helmi's WMedia Support". And yes: this was the reason for my issue: after installing it, the viewer didn't start, and after uninstalling it the viewer worked properly again. A very nice "media support"... Well, maybe it was designed for WM6, can't remember anymore...
Okay, I'm happy that I can now add the pics to my contacts!
Regards
JoeSac
Hey Joe...
I suffer from the same problem you had, and although I'm sure I never installed anything called "Helmi's WMedia Support", it might be worth a try installing and uninstalling it. Therefore I tried to google the tool, but didn't find more than one website from Taiwan which didn't allow me to download it.
Could you send it to me, if the program is free of charge/public domain?
Can some one hook me up with a good battery monitoring program and mabe ram and other programs? I know you guy's for connections,
Appreciate the quickest reply i gtg soon..
45 views and no one can help me?
search under my name, i upload one in a past post. or email me at [email protected] and ill email it to you. This is the only one ive had work with 0 problems. Others lock my phone up.
http://forum.xda-developers.com/showthread.php?t=360684
Thank's man but I get this message when I try to drag it to my phone,
"Canno't convert file (PeraStatsc_v1.6.5), The system canno't find the file specified"
try to resynch with active synch and put on device and install on device also
I just soft-reset my phone and re-syn it rite now, im gonna try that, thx..
yea it worked, i got it on there now and i installed it, any specific way to start the program?
Well I installed it, how do I get it to work?
it should be in one of your task on your today screen, click it and select scrolling. Also i have mine moved to the top. You can do that by moving it up on the today options.
witch task, there all the deault ones? name?
~EDIT~
do i have to do anything after installation? just install and it should be a item in the "today"?
Wow, 165 view's but out of all of thoes people only 1 person had been able to help me?
well maybe a possible soft reset. but check start, settings, today, items and make shure perastats shows with a check mark and move it to the top
Item's,
-Date
-HTC Home
-Owner Info
-Voicemail
-Messaging
-Device Lock
-Calendar
-Tasks
-Windows Live
-Windows Live Serch
-Sprint Store
-Music Plugin
-HTCHomeplug
Is it compatible with HTC Mogul 6800 WM6?
did you install on device? or storage card? try to uninstall and re-install. Yes i have the titan from verizon and a buddy at work has the same app on his mogul. Try uninstalling and reinstalling onto device.
ca3sar said:
did you install on device? or storage card? try to uninstall and re-install. Yes i have the titan from verizon and a buddy at work has the same app on his mogul. Try uninstalling and reinstalling onto device.
Click to expand...
Click to collapse
yea work's now ,thank's, might want to put near the attachment "must install on main memory lol, yea works great thx alot..
/edit
I did a soft re-set after seeing it on my home, and when it loaded up it wasint on my today/items and its gone but its still installed ???
/edit
nvm i got it, thx man..
hey now, look at post number 6 i said install on device. lol no biggie glad it works now. take care
Has anyone removed these from the programme? I would love to keep my X1 as clean as possible, and i am just wondering would anything happen if i remove these programme since i will not be using them at all.
YES, u can no problem.
Yep no problem.
When I did it through remove programs the handango left some file or reg entry behind though, and everytime I started the device it would give a warning.
I used a reg editor to delete a single reference in the registry and a few files in program files I believe and now handango is truly gone
gold333 said:
Yep no problem.
When I did it through remove programs the handango left some file or reg entry behind though, and everytime I started the device it would give a warning.
I used a reg editor to delete a single reference in the registry and a few files in program files I believe and now handango is truly gone
Click to expand...
Click to collapse
ive tried removing that stupid handangoinhand twice and both times after soft reset i get a warning too. had to hard reset twice bcos of this.
what reg editor did u use? so now u dont get that warning anymore?
I did so but everytime I turn on the x1 the nagging screen saying something like this "one of the component of the Handango in hand is missing, try install it again..,"
well, just press ok and it will go away
it may be good to leave the program in the x1
you need to manualy remove it from the start up folder to get rid of the notification of missing file
slash_5150 said:
ive tried removing that stupid handangoinhand twice and both times after soft reset i get a warning too. had to hard reset twice bcos of this.
what reg editor did u use? so now u dont get that warning anymore?
Click to expand...
Click to collapse
there was no need to hard reset. simply delete handango component from-
windows/stratup.
You should not have had to do a hard reset … after uninstalling the handango applications using the add/remove programs control panel, using File Explorer go into /windows/startup items and delete the handango shortcut. What is happening is the shortcut which executes on start up doesn't find the app and registers the error.
Haven't worked out how to delete the Getting Started app yet??
tnx guys. will try that. still fairly new to ppc.
though i would hv figured this out myself if i had this problem on my pc. lol.
hmm, i just removed this program and after soft reset i got no warnings.. Did not remove anything from startup folder either.
Swedish phone, might be the difference?
.. im not saying that this is NOT a good thing
Thanks for the tips guys, got the Handago out in seconds. Still, any idea on how to remove "getting started", msn and all that other junk?