Has anybody out there created a T-Mobile USA settings cab file?
I think that with all the flashing going on somebody must have created one for easy settings restore?? maybe??
I would very much appreciate it if somebody could send one my way...
Also, is it true that T-Mobile USA has free data with a Pre Paid SIM?? I was reading that if you install a prepaid SIM you get free Edge data?
use this link to do it yourself..not cab. i mean just plug in the data:
http://www.theody.net/t-mobile.html
word of warning.. in there it lists the network address as xx.xx.xx.050 put it in as xx.xx.xx.50.
love them typos.
wergeld
I just installed Papa's ROM, SMS and Phone are working.
Anything to do with my data is not.
I have read about using the NetworkWizard.cab, but I also read that you can set it up manually. How do I do this, or can somebody point me to a how-to guide?!
Thank you,
sKyZ
First off, share with us which carrier you would like to set up with.
T-Mobile? AT&T?
Hi out there,
searching for a while now. Found nothing, but CommMgrPro which is way to much.
I search for a simple software to automatically disable GPRS/UMTS data while roaming and enable it back when logged into my provider again.
Would be nice to have more than one "home" provider.
Any hints? Thanks and happy holidays.
the simplest way is change your mobile while roaming
i was surprised that my htc touchpro activate
data communication automatically while i
had disactivated data com before.
Modaco NoData
Thanks. At least a simple way to enable and disable.
My problem is that i live close to the boarder (germany/france) and that i flip into roaming here really fast.
An automatic solution is needed very urgend.
Locking to my provider is ok, but the htc asks me what provider to join, when back.
All that sucks.
I cant believe that there is no solution.
Is CommMgrPro able to handle that?
Nobody?
Nobody else who got this problem and nobody who got a solution?
Is CommMgrPro able to handle that? The documentation is bad.
Prof. Dr. YoMan said:
Nobody?
Nobody else who got this problem and nobody who got a solution?
Is CommMgrPro able to handle that? The documentation is bad.
Click to expand...
Click to collapse
Maybe you can PM danielherrero.
He's the creator of CommMgrPro.
I am very interested in this as well - and from my searching seems a lot of others would be interested in an automated system.
My network provider automatically roams to another specific provider when in a non-coverage area (small pockets within metro areas and rural). The problem is that the data cost when roaming is ridiculous. I use Push Email for work and while on roaming want GPRS access to be disabled until I am connected back with my provider.
I've installed NoData by MoDaCo which is good but this requires the user to remember to enable/disable GPRS.
*EDIT*
I found exactly what I needed after a more searching - Wombat's PhoneRoam Script (Stay Connected to High Speed Networks Only). Will see whether it does the job
Prof. Dr. YoMan said:
Hi out there,
searching for a while now. Found nothing, but CommMgrPro which is way to much.
I search for a simple software to automatically disable GPRS/UMTS data while roaming and enable it back when logged into my provider again.
Would be nice to have more than one "home" provider.
Any hints? Thanks and happy holidays.
Click to expand...
Click to collapse
I agree to have more that only one network provider. Here in Belgium we can subscribe to Vodafone passport that enable to use "free" of charge the data on any Vodafone network, but when I go in France it switch to other provider and in that case my push mail is expensive... I'm also in the boarder of France.
So basicaly :
1/ A very very simple prg that disable the data automatically if roaming.
2/ A version 2 that would put all permited network provider even if roaming.
Thanks
This thing exists for the iPhone. Its a simple switch in the interface.
You can select "Data-Roaming" on/off, thats all.
Where is it in WM?
Prof. Dr. YoMan said:
This thing exists for the iPhone. Its a simple switch in the interface.
You can select "Data-Roaming" on/off, thats all.
Where is it in WM?
Click to expand...
Click to collapse
Because Apple is looking this forum (like MS) to know required features and this one is in the back log.
what about modacco no data just read that u tryed it dont mind this post
Dynomite232 said:
what about modacco no data just read that u tryed it dont mind this post
Click to expand...
Click to collapse
Modaco is fine but when you are at the border is quite difficult to follow your carrier and disable data time by time...or even remember you are switching to another country after few km and you always have one app trying to connect (Tomtom, weather, opening a mail...)
Modaco it's what I use actually but let me forget stressing an unwanted roaming data connection...
a+
Used NoData and application is still able to connect...
Hi,
I switched off all data connections in the registry (using frost Advanced Config, than also tried NoData) and in general windows mobile apps aren't able to connect... but I have a one third party application, which is somehow able to ignore that and connect even when the data connection is toggled to DISABLED...
Any ideas how to REALLY disable data connections (for roaming)...
here is the automatic solution http://forum.xda-developers.com/showthread.php?t=503131
this will automatically disable ALL data in roaming and re-enable under home provider without any user configuration - nothing to toggle
Hello fellow tweakers,
I recently changed from provider. My current provider (tringg.nl) is using the network of an other provider (kpn.nl) in our country. This is called, what i know, national roaming.
The problem is that my HTC HD2 cannot see the difference between national and international roaming. Therefore I cannot forbid my phone to connect to foreign country providers. And I keep seeing that ugly roaming icon in the taskbar.
Does somebody have the same issue?
Or does someone have a solution to this?
Is there some way to change/overwrite the home network provider?
Thanks,
mrG1985
HTC HD2 (LEO)
With latest ChuckyROM WM6.5.x (WWE)
I hear people say that the iphone does not see this as roaming.
So how can we make this work on Windows Mobile aswell?
Anybody?
What you should do is download an app called 'dial up enabler/disabler gprs' (search for it on this site). Each time you go abroad you will have to manually turn off your data connection, but it works for me.
In the apps like Twitter, Weather, etc. you can check allow to download when roaming.
Dio, thanks for your reply.
I am aware of this app but i would like to fix the root cause.
There must be a way to modify the home network.
For the time being i will have to set every thing to roaming allowed.
I have unlocked my US Cellular SM-N900R4 on Lilipop, and am now trying to get it working on T-mobile. After the local USC store unlocked it, I added an APN editor from the Playstore, and now have the data working for the LTE connection. The problem that i am having is that it gives a 'no Sim or Sim Error' when trying to place calls, probably due to the network setting not allowing me to select GSM / LTE network option. The only 2 options for network selection LET / CDMA or CDMA.
The following thread was for unlocking a Sprint G2 for Tmobile, but gave some good info but the apps just wornt work on my Note 3 on lilipop.
http://forum.xda-developers.com/showthread.php?t=2729370
The radio switcher app crashes, as well as the other ones that i saw on the PlayStore, so i cant select a GSM option
I was able to install an APN app to get the data working, so now i just need to get the voice / calls working. I was able to install the Rom Toolbox Lite app from the store, but there is no
ro.carrier=???
ro.build.target_operator=???
available from the build properties. Instead there are CDMA operator values for US Cellular and the 310??? value for US Celllar. Should i change this value to 'None'? IF so, what is the decimal value for the 'None' carrier option?
Can anyone give me some suggestions? are these apps specific to the Sprint G2 or to the android version? Is there a custom rom that might enable these settings?
Thanks in advance for any assistance or re-direction to information on the subject.
Suggestion would be to use the Sprint forums .