When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.
Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.
henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?
You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)
Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.
Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.
hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?
I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.
Do you have a DLINK AP ?
If so, ithey do not get along very well
brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"
what is the brand of the access point wi-fi that you have ?
brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.
Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.
OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?
eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...
henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz
XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?
I'm got yesterday Wireles LAN Card SDIO 802.11b.Problem is that i can't connect my Qtek 2020 with this card.Can somebody help me about this problem?Thanx
Have you installed the drivers on your device? The card should have come with a CD, if not go to the manufacturers site.
Can you detect any networks?
Please describe the problem more precisely, and maybe someone can guide you better then this.
I'm totaly new in this.I tryed to folow instructions in manua.I instailed all drivers that i have recived,but still i can not find network and i have one wireless in my house.My main problem is that i don't know how i can make set up in my Qtek 2020.Thankx for any sugestion
Ok, I never actually used a separate SD card, but I just finished setting up my home network last week so I'll try to give you some pointers until someone more knowledgeable comes along.
1) If everything was installed correctly, you should get a new icon, in settings or programs (depends on the card I think) for the Wireless utility.
There should be an option to turn it on and off, so make sure its on.
2) If you are not sure how your network is configured, or just don't want the hassle of manually setting up the device, download Hitchhiker.
http://www.kasuei.com/hitchhiker/ its a free app that will automatically configure WiFi and connect you to the network. You will need .NET CF2 installed for it to work.
Also you can see any networks that were detected in Start->Settings->Connections->Network cards. You can choose there which one to connect to or manually configure the settings.
Thank you mr.Levenum!!!!
I will download tomorow this progam and i will try to connect SD card with Qtek again.I hope that will working well.Thank you too much for your help. Best regards
Hi!
I followed all instructions,and i instaled drivers and utiluty from instal cd.Problem is that my Qtek can't find any avalible wireles network and i have one in at home.I put all correct parameters for this network,but still nothing.I also tryed with program"Hitchhicker",but problem is the same,hi can't find any network.Have you any sugestion what more i can try.Thank you
Try checking the settings on you router.
Is it set to broadcast SSID?
What standard is the WLAN card B / G ? And what standards does the router support?
Also it is possible that your router is set to a channel the WLAN card does not support (my router supports up to channel 14, but my Jamin only up to 11)
Try using a different channel.
Hi,
I have a Dopod 828+ upgraded to NL1.13 ROM +1.13 Radio + Big Storage. Tried to use my Spectec WIFI card(802.11b) with spectec drivers(SDW 820 for PPC 2003) but without success as it could not detect any network at all. Found another driver, mod E300 driver & wifi companion, in this forum and tried using it as well but it still give me the same problem. When i uninstalled my original spectec drivers, i have also completely remove the registry string as well. Am i missing out any more steps? Any advise?
Alex
I'm trying to set up my Compact II as a modem for my Asus Eee (running XP) but having some difficulty. I have Activesync 4.5 installed, setup with the Compact II as my 2nd machine but not syncing with Outlook. When I use the Modem Link on the Compact II and Active it I then plug in and Windows tries to find a driver. I then insert my T-Mobile MDA Compact II CD-Rom (shared over the network) but it doesn't find a driver for it
I've successfully set this up on my Inspiron in the recent past so I know it should work, but I can't think what's causing the problem on my Eee. Any ideas would be greatly appreciated!
Tony
Fixed my own problem! For anyone struggling to get their Compact II Modem Link function working in the future you have to force the Have Disk button during the installation wizard. Windows doesn't detect the folder with the modem driver in on the CD-Rom. The driver isn't signed so you'll have to accept the security warning. Works a treat with dial up GPRS settings over the USB cable
Hi! I'm also have the same situation. GPRS settings and ets in MDA - OK, BT connection to comp - OK, but error in modem link.
Could smb throw correct driver? Thanks!
Vlad_33 said:
Hi! I'm also have the same situation. GPRS settings and ets in MDA - OK, BT connection to comp - OK, but error in modem link.
Could smb throw correct driver? Thanks!
Click to expand...
Click to collapse
Do you have your original CD-Rom? It should be on there but you'll need to browse to it manually.
Which model MDA do you have?
I'm sorry - have no time to visit! I haven't original CD-ROM - this is one and the main problem. I have MDA Compact II T-Mobile, with original ROM soft (11/14/05), no upgrades, no reflash. If smb have bloody driver - throw me pls!
Vlad_33 said:
I'm sorry - have no time to visit! I haven't original CD-ROM - this is one and the main problem. I have MDA Compact II T-Mobile, with original ROM soft (11/14/05), no upgrades, no reflash. If smb have bloody driver - throw me pls!
Click to expand...
Click to collapse
I'll dig out my CD-Rom and pm a link for you.
[Originally Posted by Vlad_33
Hi! I'm also have the same situation. GPRS settings and ets in MDA - OK, BT connection to comp - OK, but error in modem link.
Could smb throw correct driver? Thanks!
cheki said:
[Originally Posted by Vlad_33
Hi! I'm also have the same situation. GPRS settings and ets in MDA - OK, BT connection to comp - OK, but error in modem link.
Could smb throw correct driver? Thanks!
Click to expand...
Click to collapse
I've sent you a pm with link too.
My link won't stay up there forever... can any experienced users in this forum can refer people to another download site?
hi people'
would any member know anything about how i can connect a pluscom wfi card to my xdall himalaya please so i can hook it up with my wireless router
do i install the drivers on the pda' if so how do i install them because im running windows 7.
would anyone have a link for the updated drivers if i need them.
thanks in advance because all you guys are so bloody wonderfull.
rgds basic
basicbri said:
hi people'
would any member know anything about how i can connect a pluscom wfi card to my xdall himalaya please so i can hook it up with my wireless router
do i install the drivers on the pda' if so how do i install them because im running windows 7.
would anyone have a link for the updated drivers if i need them.
thanks in advance because all you guys are so bloody wonderfull.
rgds basic
Click to expand...
Click to collapse
Maybe this helps: http://forum.xda-developers.com/showpost.php?p=8690649&postcount=13
The attached .cab file is to double click on your device.
basicbri said:
hi people'
would any member know anything about how i can connect a pluscom wfi card to my xdall himalaya please so i can hook it up with my wireless router
do i install the drivers on the pda' if so how do i install them because im running windows 7.
would anyone have a link for the updated drivers if i need them.
thanks in advance because all you guys are so bloody wonderfull.
rgds basic
Click to expand...
Click to collapse
Hi I have the same card as you. It works fine on hima.
1. You need to install drivers and app for it on hima (without card inserted)
2. Soft reset your hima.
3. Power on your hima and insert the card (after boot) it should pop up automaticli on your status bar that is searching for Wifi. If it does`t show go to the app that you installed and configure (mine work on defaults and did`t need to configure anything)
I tested the card on luby`s WM 6.5 rom
http://forum.xda-developers.com/showthread.php?t=741800
And uploaded original drivers, app and manual that is coming on cd with card.
http://www.box.net/shared/mugo8z80u1
Hope it works for you