Hi there,
as strange as it may sound, i want to uninstall A2DP "properly" without having to do a Hard Reset.
I'm having a big issue with it, and even Hard Reset didn't worked anyway.
I'm afraid that just removing the files and removing the keys won't be enough.
Is there any procedure for that?
Did anyone tried and succeeded?
Thanks
Related
How can i solve this problem?
Regards
Stev
difficult to say.
Did you try a soft-reset?
did you try a hard reset?
When did it stop responding? after fall? after upgrade? after dropping it in the loo ?
do the buttons work?
Pls give more details
Dear,
As M4io said, it's difficult to say, did you uninstall any unofficial software such as BT Patch, etc? if so, only hard reset will do
HTH
Cheers,
I used to have this problem.
it due to Calligrapher 7.4
For me, to solve this problem by uninstall that software from activesync.
in my case ,touch screen doesn't work but hardware button still work.
you may try to uninstall the last software that may cause this problem via activesync.
I do soft-reset & hard-reset still not work. It stop when I get up morning. Last night no problem. When do hard-reset touch screen not response..but screen still work. All Button is Ok. I can't calibrate the screen when do hard reset.
Did you chack you Ext. ROM and \Windows\startup ?
about "TPdisable.exe"
you can try remove it from Ext.ROM and do hard reset again.
Hope you luck.
Have you got a screen protector fitted to the screen, this will sometimes stop screen taps registering if the edges are under the edge of the screen.
Hi i cant seem to enable the vireless netowrk on my i-mate jasjar. It worked in the beginning but now it just blinks realy fast when i press the button to enable it.
The only thing i can think of is that i installed the extended rom thing from buzz...it was that cab file i found in the comments on his site.
pls can anybody help me with this?
Please help me ppl. I tryed reverting the settings for the extended rom and that did not help eather.
Please i really need som help here guys
I had my wifi stop working at one point for unknown reasons. Soft resetting didn't fix the problem. It did start working again after a hard reset. It was not doing any fast blink like you describe, so it may be that whatever your problem is has no relation to whatever my problem was. I don't know if you have tried hard reset, but in any event I'm hoping one of the wizards here will have better advice for you.
Hehe by fast blinking i mean when i press the "wifi" button in the wireless manager. It just blinks breafly to indicate that i pressed it..but it does not turn blue like its suposed to and it does not turn wifi on like its suposed to.
Had hoped i wouldnt have to do a hard reset as i have my device set up just perfectly now
So if anybody has some tips here ill try anything.
btw what is sddeamon? i had sevreral of thouse in the notification que and i remoced all but one. could this be the problem?
OK, now I know what you mean, and unfortunately my problem was different. It would presumably turn on (button would change color) but not connect with anything, including access point that was no problem before. And sorry again since I don't know what that sddaemon thing is for sure. It might be related to the voice dial function, but I'm really not sure. Hard reset is definitely a pain. I've made a little cheat sheet for myself with all my tweaks to get things set up again. But it's a pain anyway. Part of the cost of being on the bleeding edge with these wonderful little machines.
so true so true. But since it seems that nobody else has this problem im a bit afraid that there might be a hardware problem.
Well only way to fighure it out is to do a hard reset!. Is there any way to back up WM5 like there was in 2003?
well i have now preformed a hard reset and that did not work. I also installed the imate rom twice (installed arabic first LOL) and that did not good eather.
So i guess there is a hardware issue with the phone itself...
Any thoughts?
Hi,
I have a strange problem. The soft keys stop working suddenly. I dont know what provokes it. But it just stops working at times until the next soft reset. I can still use the stylus on the screen buttons, but pressing the soft keys do nothing? Any idea? Any similar experience?
Hi jugulator, I have exactly the same problem. My latest install is PI 2007, PenPower WorldCard Mobile andWM5torage. Wonder if Pi 2007 is causing the problem.
Did you install and uninstall WM5Newmenu? One of the versions did this to me :twisted: I did a HR, but you mey check on the thread. Think I saw a solution :wink:
I have lot of programs in my prophet. I did a Hard reset resently, but even now the problem persists. But after HR I reinstalled all the programs which I had
I'm not sure exactly why it's happening, the last thing i remember doing before this problem occurred was uninstall some programs, and decrease the text size in settings.
But everytime I power on the handset, it will boot up fine. But then the activesync information screen (the one that shows your recent syncronizations) will pop up, and my phone freezes up right there. It's pretty much unavoidable at this point, everytime I reset my phone its the same problem. I'm able to do a soft reset at this point, but that's pretty much it.
If it's any help, one of the programs I removed was pTravelAlarm (Burr oak software) i got rid of that because i was getting a "Cannot execute \Windows\pTAmgr.exe" Notification Error during startup, which now that I mention it, the error still pops up even after i removed it.
Is there anyway to perform a hard reset without having to be in windows, or connected through activesync?
Or am i pretty much boned at this point.
You don't need or want to be connected to Active sync when doing a hard reset!
Hard reset is pressing both soft keys at the same time as poking the stlus in the soft reset hole. This takes device (after some menu screens) back to the way you got it originally.
Mike
ah, ok, i was under the impression that the "Reset" key was actually on the screen. yes im a silly newbie . Thanks!
tyfin85 said:
ah, ok, i was under the impression that the "Reset" key was actually on the screen. yes im a silly newbie . Thanks!
Click to expand...
Click to collapse
We're all newbies to start with and we're all still newbies with some aspect or other of Hermes or WM5.
Use this thread if you have problems with hard reset.
Mike
I did a hard reset, and its working just fine. Though i do think i'll be updating the ROM, seeing as i've had many problems with the phone freezing up and recycling itself under the OEM ROM. Thanks again
tyfin85 said:
I did a hard reset, and its working just fine. Though i do think i'll be updating the ROM, seeing as i've had many problems with the phone freezing up and recycling itself under the OEM ROM. Thanks again
Click to expand...
Click to collapse
For many freezing up problems see my post on active sync here:
http://forum.xda-developers.com/showthread.php?t=288352
Mike
I installed some software, a voice activation software, and now it crashes everytime i try to navigate to settings to remove the software. I have to reset it from the back everytime.
How can I sort this out
Sounds like time for a hard reset?
Sfkn2 said:
Sounds like time for a hard reset?
Click to expand...
Click to collapse
+1
I'm fairly certain you are going to have to hard reset too. Sorry
i just suffered the same fate thanks to my MT4.
btw , if you have sktools, you can try the remove program from there too
How do I do a hard reset? Wasn't that only done through the settings option on the phone?
Hard reset means you return the Xperia to "out of the box" state ...you loose all data and programs
1. turn off the phone
2. Hold both right and left buttons (the hardware buttons that stick out a bit, right under the screen)
3. press power button, while still holding the others
4. follow on screen instructions (to press "R" to confirm reset, slide out and use the hardware keyboard)
thread
I had exactly the same problem this week.
I had bought the program and installed it successfully. However after installing it again after a hard reset, it did exactly as you describe, crashing when you try to access settings.
I think the version I had purchased was MSVoiceCommand_1.6.17913.CAB. There is a version getting around these forums (MSVC_US_PPC_1.6.19209.bengalih.CAB) which did the trick for me.
Hope this helps
CapsLock1 said:
I had exactly the same problem this week.
I had bought the program and installed it successfully. However after installing it again after a hard reset, it did exactly as you describe, crashing when you try to access settings.
I think the version I had purchased was MSVoiceCommand_1.6.17913.CAB. There is a version getting around these forums (MSVC_US_PPC_1.6.19209.bengalih.CAB) which did the trick for me.
Hope this helps
Click to expand...
Click to collapse
I'm scared installing any other voice command now, I've reset the phone too many times.
IS this software even that good?
I had the same problem too
In lieu of installing a 3rd party software (eg sktools, memmaid, etc) you could try uninstalling it via active sync. Or maybe remove it from the startup programs then soft reset.