Hello,
I am planning to buy a magnet system to fix my phone in my car.... I've already crashed an ipod using a magnet (I guess because the ipod has an hard drive inside....) and I wanted to make sure that this is safe both for my Atom Exec and for my battery.....
Thanks,
Greg
anyone ?
I've been using one with my jamin for 3 month now and previously with my i-mate for 2 years without any problem.
you can claerly use magnet holder with atom.
Related
Hi,
Does anybody know, or has anybody tested, the I-Mate JAMin (etc) in the THB Bury car cradle for the I-Mate JAM? The dimensions of the two devices are the same, and the USB, headphone socket, and external antenna connector all look to be in the same place.
Just wondering if anybody has tried this setup.
Cheers
Paul
THB Jam kit
It doesn't work out of the box. There are some grooves on top of the JAM that aren't on the JAMin and that's what the THB kit uses to retain the JAM. You may be able to adapt it. I'm using the THB Blueadapter and it works well, albeit without the external aerial connection.
I am using my THB Bury Jam cradle, and can confirm that it works fine.
Although it does not seem to engage the aerial connection as well as it did with the Jam, on my S200 the connection seems to be slightly higher, only possibly by half a mm.
You also need to use the additional self extracting file from THB to get the hands free.
Also the annoying echo is no longer there that I got with my Jam.
Hope this helps.
James
Interesting
I must have another look, unless there is a subtle difference between the JAMin and S200 cases. It certainly didn't seem to work that well in the shop, with the little bumps deforming the case. Thanks
Interesting
On my S200 the two little grabs on the THBury holder seem to sit nicely where the SD card recess is. Please see attached.
Cheers
James
This is a thread from a while back. Has anyone been using the Bury car cradle (on their website they show it as the MDA compact holder).
I'm still looking for a real (complete) carkit (not just a cradle with loading capability) and so far this is the only one I can find. I really don't want to combine a cradle with a BT speaker system.
Works with minor tweaks
I have the THB Uni8 cradle for the MDA compact running with my neo.
I only had to do some minor "dremeling" do not get my neo scratched when removing and mounting it again and agian. It is just a five minute job, even if you have two left hands like me.
I got an i-mate JAMin that was driven over by a car. The screen was wrecked. I tried to connect it and it sync OK. With Pocket Controller it obiously works quite well after all, exept thyat it cant connect to the network, guess something is wrong with te antenna. Could this be fixed? If so, I only need to replace the screen.
Suggestions?
HPN
All I can say is WOW, the JAMin survived a run over. Sorry to hear about your misfortune tho...hope it can be fixed from the old O2 MINI parts or something.
Nobody know where I can get a new screen?
HP
Any chance of a pic to show the damage?
Help Help Help.
Recently I had to claim on my O2 insurance to replace my XDA IIi which I was more than happy with. It was running TTN 5 through a TomTom diamond shaped wired receiver and I had the phone going through the Pioneer DEH 70BT raido.
So guess what... O2 will not support or replace for an XDA IIi that went up the swanny and would only offer a XDA Mini S or some other poxy phone. So I take the XDA Mini S set it up with all the brilliant guidance from the threads that I had read. I then obviously have to change the cradle at my cost as O2 wont cover it.
So here is the problem, I have heard that the only GPS reciever you can use on a Mini S in a cradle is a Bluetooth one but as I use the Bluetooth connect to my phone I cannot use both TTN 5,21 and the pioneer at the same time.
So the help that I need if anyone out there has an answer it.......... Does anyone know of a cradle that has serial GPS support for the Mini S in a cradle so that I can still use the bluetooth on the Pioneer or am I stuffed. I have looked at loads of cradle selling sites but they are not very helpful and I am sure one of you top chappies can point me in the right direction. I did purchase a Mini S cradle only to find out that the cradle RJ11 port was to charge bluetooth GPS recievers which is no good for me..... Insurance who needs it huh.
Yours hopefully,, no desperately
Steve
Any news on when an adapter will be available? I had this one for my tytn and it is well integrated in my truck.
http://www.mobileplanet.com/p.aspx?i=141685
What is great about this is when you change devices all that is needed is a new cradle, the rest stays.
I have had contact with someone from THB, he told me last wednesday that there are still tests running.
It shows these are now in stock.
http://www.mobileplanet.com/p.aspx?i=141685
jbcross said:
It shows these are now in stock.
http://www.mobileplanet.com/p.aspx?i=141685
Click to expand...
Click to collapse
yes but this is for tytn and not for kaiser, is't it?
I bought a cradle for the Kaiser, but won't advice anyone to buy it if you want to use TomTom. The instructions are not audible when the phone is in the cradle :-(
I have bought a MDA Compact 2 from ebay. The touchscreen was broken so I built in a new one. First i unlocked the sim lock and then I installed WM 6 with touch and flo. The problem is: When I turn on the phone it can't find any networks and the speaker is making weard noises. When i turn off the phone the loudspeaker is working again. Can anybody help me?
Sorry for my bad english
You probably made some mistakes down the road when you were putting the phone back together after the touchscreen replacement. Check if everything's plugged in correctly inside.
I have checked everything. The problem is that everything works perfect. Maybe I will sell this phone on ebay and buy a new one. Maybe i will buy a compact 3. Can I unlock there wifi or do i have to buy a xda orbit or an htc?
Thx for all replys