6828 - mini sd card access problem - iPAQ rw6828, XDA Atom General

hi, just got my 6828 with 80x 2gb. i hv a problem tat i need to always softreset after i performed some file maintenance like copy files from/to the sd card (either to pc or to device's memory). the response of the device just got lagging/or not responding at all after the copy. 1 strange thing is that i got into the similar situation when i just simply create a new folder in sd card.
my card is formatted to FAT 32K cluster with no backup FAT now, tested with FAT32 512b, 4k etc still the same problem. i slotted the card into my old 3970 and hav no problem at all!
anyknow wat's wrong?

Related

Storege card trouble

Hi All,
My MDA II plays strange game in case no card inserted - alocate 14,57MB Storage. No other storage card recignize (trying 128, 256, 512) only ****ing 14,57MB as a internal memory.
/Leonid
Storage card trouble
I think I am missind fatfs.dll file - anybody can sent it - is in a windows folder.
Leonid
My I-mate has 14 MB of internal storage on it. It can be used to permanetly store backup info like contacts, tasks and network settings so that you do not lose them during a hard reset. Under File explorer it displays as "Storage." When you insert an SD card it should come up under File Explorer as "Storage Card." When I first got my 512 SD card my I-mate was a little buggy about transfering files to it, but after a hard reset it worked perfectly. (I dunno what it was) If you can afford a hard reset maybe it will help. You can always save your Contacts/tasks/settings in the 14 mb storage before you do.
Card problem
Thaks for explanation, but my MDA II still does not read any card. I was browsing registry and could see that MMC and SD cards require fatfs.dll library what is not presented and registered. This library shall be in windows folder and if you send it I can register and test it.
Regards
Leonid

sandisk sd card 2gb and qtek s100

I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?

How I fixed my 2GB miniSD problems

Today I received my 2GB Sandisk miniSD card from eCost (they sell it for real cheap so I thought I get one). I formatted it with XP (using its supplied SD placeholder) to FAT32. After I placed it on the PDA it reported the following crazy results:
2 GB storage
960 MB used
970 MBs free
In other words, my Wizard (running the latest AKU2 QTek ROM from ~March 22 2006) sees the full 2GB, but can only use 1 GB!!!
I then tried to format it with XP using FAT16, but the SAME problem occured.
Thankfully, I downloaded this utility: http://pocketgear.com/software_detail.asp?id=3191 and I did a "repair" (or format) the miniSD via the PocketPC. THIS utility saved the day! It fromatted the miniSD card correctly! And now I can see and use ALL of the card.
Please note that the problem/bug might not be with XP or the PPC. It might be with the actual SD placeholder, or even the flash reader (hardware bugs). The point is, that somewhere along the way something gets screwed during the formatting. So, if you buy a miniSD 2GB and you get such or other problems, download the StorageTools utility linked above to format (or use "repair") the miniSD card directly in the PocketPC instead of using XP and a SD-placeholder/flash-reader.
BTW, I also posted a review of the QTek 9100 yesterday: http://tuxtops.com/node/749
wow! I'm reading your post and thinking I wrote it! I had the EXACT same problem. I tried another utility (that made my miniSD card unrecognizable to my kjam).....a quick format with my pc, and I was back to only about 1gb of usable space....then i stumbled across storage tools. I ran the repair, and it was fixed! ahhhhh 2gb of space....woohoo!
Same problem, diffrent solution...
I also had the same problem, but found another solution, after trying to reformat, both in ppc and pc and cardreader in printer, card was unreadable by all devices. Therefore, as a last resort, I put the card in my digital camera (nikon s2) wich recogniced the card as unformatted and kindly asked if I would like to format it... after that it worked perfectly
help!!
i got the same problem with my 2G sd card..
i formatted with my PC and now it show only 975mb in my card!!!!!!!!!
i had try to use the StorageTools to repair it via my XDA mini s.. but it still show 975MB.... any idea???
After you used StorageTools to repair the miniSD card, you need to do a soft reset for the PocketPC to recognize the rest of the card.
However, I must tell you, the only clear deal is to FORMAT the card WITH StorageTools and NOT to simply just do a repair.
Hey I have this same problem, but the link to the program is no longer any good. Does anyone know what the name of the application was.
Thanks,
Bought new card
OK- Now I do not know what to do. I just went out and bought a new 2GB scan Disk MiniSD card. When I went to install my data on it, I can only get 1GB on the card. I need 2 GB. Does anyone have any ideas on how to fix this. I thought the last card was bad, but I guess not. This happens on 8125 and in Windows. Both see the card as 2 GB but will error out when you try to add more than 1 GB.
Please help.
Thanks,
The name is that one: storagetools...
I had the same problem and using just the evaluation version of the program was good enough to format mi sd and everything it's ok!
http://storagetools.softonic.com/pocketpc
what is a better format for MiniSD 1G (prob:read/writes slow)
I have a problem with my miniSD card reading and writing WAY too slow.
I think that may have happened when I formated the card as FAT32 partition instead of FAT. This thread seems like it is a helpfull answer, but which would read and write better? Does anyone know?
Thanx in advance.

SD Card problem?

Probably this topic should be in a different place, but In some way is connected to my BA.(Im using xplode's WM6). Ok back to problem. So I have 4gb SD card and I can only copy files on it after format. If I want to add sth on a card files became damaged.(I have only one chance to write files if i want to add sth I need to copy all files back on my pc then foramt card and then copy files back on Card). Problem is connected to my BA because when i copy files on a device and from device on my card(by resco explorer) files are ok(i dont need to format card). So where is the problem??
I wish you understand what I'm talking about
Are you sure you have 4GB SD card and not SDHC? SDHC cards are not supported on BA.
I'm sure. Its weird cause when i copy file from phone memory to storage card files are ok. But whem I'm copying directly from PC to card throug card reader(or wm5torage) files are damaged,unless I make a format but format halps only for one time.
May I know the file system of your SD card?
file system of windows NTFS. System of card FAT32
i had this prob. on my previous card its due to the file format. Beyond 2 gb fat do not works so it goes to fat32 and but these non sdhc card keeps running on fat so this happens. in ideal form the 4gb sd should be 4gb sdhc to work properly.
this causes me to switch to 2 2gb sd card instead of 1 4gb. I also advice u to take backup regularly because u never know when they stop working properly.
so if its file system problem why my 1gb card i working(fat32 as well as 4gb). That could mean that 4gb card is damaged sp why its workin after format and why I can copy from phone without mistakes? Is there any way to change file system on a card? By windows formating i can only format fat32

【Urgent】SD card become read only under android

Urgent!!!
I don't know if this is a bug or not. I used to copy files by selecting the disk drive mode. After that I will safely remove the device under windows before disconnecting the usb cable.
The problem is sometimes after copying files to sdcard, the SD card will become read only under android. For example I cannot copy or create files using file explorer. When using camera app it says "Unable to save file to SD card due to insufficient file permissions". When using album it says "SD card unmounted or not present".
After the problem occurs I cannot access the SD card via disk drive mode anymore, unless I physically removed and reinsert back the SD card.
The strange thing is I can still access the SD card in PC via card reader with no problem. I can also view the existing files in the SD card under android (eg opening .apk in SD card)
I tried flashing the ROM for 2 times and with a different SD card. Also I formatted the SD using Panasonic SD formatter and partitioned properly. The problem still appear after several access under disk drive mode. Million thanks!!!
I've noticed the same thing in the DL DesireZ v3.3 nand ROM...
But now since I've switched to skink_Clean_Desire_v1.0 I don't have the problem any more...
No problem solver I know... but just to confirm the issue!
It was also read-only when I had disk drive mode chosen and connected to my win xp pc!
so when I deleted files over the computer they still existed...
I always remove the sd card securely!...
hope this helps a little bit!
Memory cards get weak after awhile...Had d same issue with a Memory card...it works well on WinMo but messes up just as u described in android after a format n a few read & writes...Froyo has also been reported to ruin memory cards...Summary, there's no real solution as i've googled all over....My advice is for you 2 get a new memory card, capacity & class (d higher d number, d better its read & write speed) is up to you...I'm using a class (4) 8GB card n its been alright.
P.S. Stop transferring files via d disk drive option in android..stick to using memory card readers or d MAGDLR function (though some also report file errors with dis).
voncrane said:
Memory cards get weak after awhile...Had d same issue with a Memory card...it works well on WinMo but messes up just as u described in android after a format n a few read & writes...Froyo has also been reported to ruin memory cards...Summary, there's no real solution as i've googled all over....My advice is for you 2 get a new memory card, capacity & class (d higher d number, d better its read & write speed) is up to you...I'm using a class (4) 8GB card n its been alright.
P.S. Stop transferring files via d disk drive option in android..stick to using memory card readers or d MAGDLR function (though some also report file errors with dis).
Click to expand...
Click to collapse
Thanks for your reply
But how come windows and wm can read and write normally but it doesn't work in android?
Also, I have been using NAND and its disk drive option to transfer file in Cotulla's desire stock Rom and there is no problem at all. Would the problem be related to app2sd since the card has a ext4 partition?
do a chkdsk on your micro-sd card. let it repair and then don't delete the LOST folder in your sd card. ^^ you will be able to mount as read/write after this
victortan001 said:
do a chkdsk on your micro-sd card. let it repair and then don't delete the LOST folder in your sd card. ^^ you will be able to mount as read/write after this
Click to expand...
Click to collapse
Try a chkdsk as well...But in my experience, i did it several times & it only acted as a band-aid...As it reverts to read only ltr on...
voncrane said:
Try a chkdsk as well...But in my experience, i did it several times & it only acted as a band-aid...As it reverts to read only ltr on...
Click to expand...
Click to collapse
So is this a SD card problem or ROM problem?
Previously I had been using Cotulla Desire stock Rom for a month and the problem didn't exist.
I don't mind buying a new SD card if it can completely solve the problem. Thanks

Categories

Resources