Related
Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
I actually had an oportunity to try out the voice levels and sound is awful! I also tried to connect it to my SE T610 and it refused and it did the same when I tried to connect it to my Toshiba M200 tablet PC as in both cases it never asked for the passkey...
I am begining to think that they must be faulty??
But becuase I have never had a BT headset before so I'm not sure if I am doing something stupid!
Andy
I have managed to try a SE BT headset with my MDA Pro and it did work and activate voice command. So it would seem that the headset is faulty. Does anyone have any ideas before I send it back?
Andy
Please!! Is there anyone here who can comment on whether they think these are broken or if I am just incompetent!
If they are broken then I need to send them back really soon...
FWIW, my Jabra BT330 and the SE HBH-662 just need a single quick click to activate the voice dial, but these Plantronics Pulsar 590A things I just got (which are fandabidosi by the way!) need a prolonged press to do the same.
Have you tried keeping your finger on the button for a while?
Ferg.
andykemp said:
Sorry if you have already read this but I am still having a problem!!
I got the new Bluetake iphone mini stereo headphones for christmas and was hoping to use them with my MDA Pro (running the new O2 ROM).
I have them paired as a "Hands Free" device...
I know that I can't use the stereo features until the new A2DP patch come out (hopefully soon!), however what I want to be able to do is use voice command to initiate calls etc. However when I press the call/power or Play/Pause button all I hear is a beep from the headset and nothing hapens on the PDA...
However I can use the button to answer and hangup a call (as long as I answered it with the handset...) If I initiate the call on the MDA then I can't hangup with the headset...
Am I doing something wrong or does it sound like something is faulty??
Any advice?
Thanks
Andy.
Click to expand...
Click to collapse
Just looked at the instructions for the bluetake i-phone (bt450rx),
(got them myself for xmas)
and it does not say that you can connect to the phone for voice control,
however you should be able to hang up from the headset.
i have got the k-jam (wizard) and can dial from the k-jam and hangup from the headset.
voice control may not be available because the new bluetooth stereo headset's are ready for AVRCP (Audio Video Remote Control Profile).
the older bluetake headset bt420rx can be used for voice control but do not have AVRCP function.
I hope i am wrong, but it may be the answer you have not been looking for.
Hmm... That sounds bad...
I only have a few days left to return it and don't know whether to get a replacement or to go for a different headset?
i like the idea of being able to play/pause/f-foward/rewind via the headset(when bt v2 upgrade is available), because music playback is more important to me than voice dial.
of course if you can send it back, then perhaps just wait until bt v2 is available, and then buy a headset for the uses you require it for.(wish there was an emotion with cross eyes) LOL
I know what you mean but I would still be able to use voice command!!
Does anyone else have the 450Rx and a universal and could test it for me?
if you do prove me wrong (and i hope you do) please let me know.
answering this problem further,
the bluetake i-phono mini headset cannot be used for voice command,
however the motorola ht820 can be used for voice control.
Had similar issues with my headset (not the same type). In the end, I had enable secure mode on the universal, pair the devices, select serial port and then immediately initiate the voice dial, otherwise it didn't work.
Gareth
I decided to play it safe and returned it back to Expansys for a refund. When someone else gets a set of stereo headphones and A2DP is out... and crucially they can confirm it works! Then I'll buy a new one!
Cheers
Andy
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
you may have already tried this, but just in case you haven't,
install and run the three files for either "bt off", "bt on", or "bt toggle",
this will switch all audio to the bt headset or away,
of course quality is not good, but at least no cables.
ps. if the headset is switch off and you put bt on, you will get an on screen error message.
aliendad said:
one good thing with motorola ht820 is that they can be used with a detatchable cable, so whilst i'm using them bluetooth for the phone side, i can still hear good quality music.
also i know from trying them with my wife's qtek s110 that you can control windows media player as well.
Click to expand...
Click to collapse
Do they come with this cable as standard?
EDIT: Did a search, and they do.... might just buy them now and sell my Sony EX-71's.... would they we at least the same in terms of sound quality? It's the thing people talk about least with these devices!
So lemme see if I got this right.... even before I get A2DP installed on my Exec, I can listen to perfect music using the cable, and also use the hphones as a bluetooth headset as well? Will the music still pause etc when a call comes in?
Just bought a pair of HT820's on Ebay there.... £38, not too bad. Should get about £25-30 for two pairs of existing headphones, so well please.
Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.
Greetings,
I have reviewed the Bluetooth vs. AT&T Tilt vs. Microsoft Voice threads, and cannot find a specific answer, so I am going to try to ask a narrow question here ...
... does anyone who has (i) AT&T Tilt with (ii) the AT&T ROMs, (iii) Microsoft Voice, and (iv) a Bluetooth Headset have all 4 working perfectly together? I need to buy a bluetooth headset, and the forums are littered with problems with Voice announcing, or problems answering the phone thru the headset, etc.
That's why I am just hoping to hear from someone who has all 4 of these things ... that work together. Any recommendations for the bluetooth headset are appreciated.
Thanks
My Tilt worked great with the stock ROM, MSVC 1.6.17913 and my BlueAnt Z9 worked flawlessly including announcing calls over BT.
Thank you!
I will look into the BlueAnt Z9. Thank you so very much for responding.
Of course ... if anyone else has the combination of stock tilt/voice/bluetooth, please let me/us know what other adapters might also work.
I did not have any issues with the Motorola H700 and MSVC 1.6.17913 on my Tilt.
H700
Andre - I recall seeing some mention of the H700 on other threads. Can you (please) confirm that you can answer the phone thru the bluetooth, and that call announce works?
jdmba said:
Andre - I recall seeing some mention of the H700 on other threads. Can you (please) confirm that you can answer the phone thru the bluetooth, and that call announce works?
Click to expand...
Click to collapse
I keep my unit on vibrate and ring and this is the way I tested it. I first placed a call using my office phone to my mobile handset in the "vibrate only" and "vibrate and ring" modes. When my mobile handset was on vibrate the notification came through to my headset with audible tones and my mobile vibrated, but no voice announce from MSVC was heard. When I switched the handset to normal vibrate and ring mode (assume this works on ring w/o vibrate as well) MSVC announced the caller through the headset and nothing audible was heard through the handset. I would say this headset is 100% compatible with the Tilt and MSVC.
Bought the Z9
My Z9 arrived today, and it does answer the phone, engage in voice command, etc.
Pretty nifty (but expensive) bluetooth.
Thanks!
Glad you like it. I hope you give us a nice reveiw after you play with it for a while. I am contemplating moving up because I have had this same type of headset for years now HS810, HS820, HS850, and the H700.
I've got AT&T Tilt, Stock ROM, MS Voice Command 1.6.17913 and Samsung WEP200 all working together.
Also, in MS Voice Command, there are options to select the source the phone calls are made from.
Go to "Start" > "Settings" > "Voice Command"
Click. "Notifications" button and the options that come up are...
-Announce notifications using Bluetooth hands free only
-Announce notifications using Bluetooth hands free if available
-Announce notifications through device speaker or wired headset only.
v 1.6 nad jabra
i still cant get it all to work on my tilt like my 8125...8126 was the bomb with vc. tilt is so nice but not with vc
I tried out a plantronics 665 the seemed to work well, but I didn't care that much for the headset. Returned it and got a nxZen nx9000, and it doesn't seem to work with voice command. Not sure why one works and not the other. Anyone care to speculate, or state with authority, why the 2nd headset doesn't work? Thanks.
Anybody knows how Logitech Mobile Pro Headset works with this combo?
Thanks
http://www.logitech.com/index.cfm/webcam_communications/mobile_phone_headsets/devices/536&cl=roeu,en
Is the Jawbone working with all this? I broke my last Jawbone, but would definatele get another, assuming it would work.
My Jawbone works with my Tilt with the stock ROM. Make sure you install VC before you pair your phone with the headset. If you already paired, delete the pairing and re-pair after the install.
Thank you much.
Now I've got another issue, somebody said "BLUEant" and I saw went looking... I like Blue
Trying to decide between the Z9 or another Jawbone. Comparitively they're about the same with the Z9 being the smaller and more "attractive" of the two, and it also costs alot less. Not to mention it's firmware can be update.
But the big plus for me is that it's BT 2.0 BT 2.0 + Firmware upgradeability make it a serious contender in my book. The Jawbone is in it's prime... whereas the Z9 could get better.
Can't decide at the moment...
I also have the Tilt and Jawbone working together but does anyone know if it is possible to issue the voice commands via the headset. I can only talk into the phone to make it dial a name and then the call is directed to the bluetooth headset.
has anyone got this to work all through the headset.
I couldn't imagine it not being possible... I managed to use the Jawbone with the RAZR V3 in or to use voice dialing and it worked decently.
Jawbone and voice dial
Have had a Jawbone paired with my tilt since I bought it. Works perfectly except calls are not announced through the bluetooth, but important e-mail subjects are read through the headset when they arrive.
The Jawbone is sometimes awkward because it gets loose on your ear/cheek if you move your head alot and then sounds like your talking through a long tube.
Thinking about trying blueant, but haven't heard any glowing reports yet.
W_P_L said:
Have had a Jawbone paired with my tilt since I bought it. Works perfectly except calls are not announced through the bluetooth, but important e-mail subjects are read through the headset when they arrive.
The Jawbone is sometimes awkward because it gets loose on your ear/cheek if you move your head alot and then sounds like your talking through a long tube.
Thinking about trying blueant, but haven't heard any glowing reports yet.
Click to expand...
Click to collapse
There are plenty of fantastic reviews for the BlueAnt Z9. It seems to me to be just the same as when I was researching the Jawbone. You'll either love it, or you'll hate it.
The big plus to me with the BlueAnt is that it's warranty is fantastic (2 years compared to the Jawbone's very specific 1 year warranty), it's BlueTooth 2.0 Stereo (should result in better sound quality as I plan to use my Kaiser as my MP3 player as well), and the big plus for me is that its firmware can be updated. Thanks to the firmware, the Z9's limitations are moreso a limit of it's firmware than it's hardware, whereas the Jawbone is fixed.
With that said, I loved my Jawbone... and I'll still be using my current one while it's still functioning (it's falling apart... Jawbones aren't very well built I'll say that) and comparing it to my Z9 when it gets here.
URPREY said:
My Tilt worked great with the stock ROM, MSVC 1.6.17913 and my BlueAnt Z9 worked flawlessly including announcing calls over BT.
Click to expand...
Click to collapse
Hi URPREY - I have the same setup (with the official ATT ROM update 1.62.502.0) working, but instead of announcing the callerid info, I'm hearing "please answer or not at home" through my Blueant Z9 via my Tilt. Any ideas?
Hi guys,
I've been scouring the web for a number of days now with no success. Was wondering if anyone is experiencing the same problem and if anyone knows if this can be fixed.
I have a HTC P3600i, with ROM 3.00.707.18 (latest ENG ROM I could find) and have been using a Jabra BT8010 (firmware 1.33) for some months with no problems on A2DP or Handsfree (even switching back and forth is ok).
Have just got myself a new Dell BH200 stereo BT headset (for better bass) and while A2DP is working pretty fine (very nice), I'm finding that I can't use the headset for incoming or outgoing calls at all.
Everytime I try doing calls, the headset icon on the phone screen disappears after 5 or so seconds, and the headset itself switches off right after.
Am hoping someone can point me to the right direction, thanks..
Well two years later
I own a Dopod C730 and lo and behold I bought a Dell BH200 and I have the exact problem descibed above. I have the latest rom and I have tried reseting the smartphone all for naught.
Well I hope someone has figured this one out at some point or else I am going to be disappointed in my new Christmas gift
Well, I gave up and sold off my BH200 already. Am back to using the Jabra BT8010.
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
an123 said:
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
Click to expand...
Click to collapse
I am not using touch. Mine is Asus P535. WM6
Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
myc said:
Mine is Asus P535. WM6. Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
Click to expand...
Click to collapse
This didn't work for me at all, on my HTC P3600i with the Dell BH200 headset. Pairing was ok, but as soon as there was an incoming call, the Dell headset would ring, and then silence.. I'd also notice that the headset icon on my phone would disappear and the headset itself would turn off.
My Jabra BT8010 headset, on the other hand, paired just fine as both handsfree and wireless stereo device. In fact, I've ditched the BH200 and am using the BT8010 till now.
Well how come i aint see this thread . Ok now BH200 works fine and it has no issues ( as you guys should understand if it works with ASUS , NOKIA , SAMSUNG phone ).The problem is HTC's coding . It doesnt support AVRPS, thats the service which is necesary for Phone to switch to calls when received and switch back to music. Now jabra uses a different technology ... But you will have to compramise on the quality of music in BH200
( its awesome ) and more over it looks like a music head set any ways .
damn! is there any workaround? or is AVRPS hardware specific? after A2DP and AVRCP, no we have another acronym to add to the lexicon
Same problem here, tested BH200 with Universal WM6 and Touch HD, headphones switch off seemingly when they receive handsfree request.
Tested them with WM5, lo and behold, it worked. Now I wonder - how come that they work with WM5 BT stack and not with WM6? Any ideas?
Well, from what I gather, at least the good news is that AVRPS is not hardware-specific... so there should be a suitable workaround to this problem for anyone using WM6.
I bought my pair of Dell BH-200 headphones yesterday and while I'm absolutely thrilled by the perfect (at this price) sound quality when playing music, I'm rather annoyed by the fact that I have to take off my headphones every time I want to receive a call. After all, that's what a headset is for, right!?
In any case, here are the specs of my phone:
HTC Touch Elfin P3452, running an up-to-date Windows Mobile 6.1 (Onyx ROM)
I'm considering upgrading to Windows Mobile 6.5 these days to see if that would do the trick... has anyone of you guys tried the Dell headphones' headset compatibility when running WM 6.5? Going back to WM5 is definitely not a option, since I didn't quite enjoy the looks & ergonomics of that OS...
P.S.: Upgrading to WM 6.5 didn't do the trick, unfortunately So I'm pretty much stuck and I don't want to return the headphones since I really enjoy them, of course once I ignore how they don't actually function as a proper headset... Any help would be greatly appreciated!
I just found this fix for the situation:
http://social.microsoft.com/Forums/...s/thread/368efd50-ce24-453a-a31c-e6747c698082
Try setting the registry value:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0
Click to expand...
Click to collapse
The best part is, it seems to be actually working (I'm with Touch HD with Win 6.1).
I am fairly new to the using the X7500.
Does anyone have any suggestions on which BT headset works best with this unit?
I would really like vibrate and caller ID type of feature since I would like to just leave my X7500 in it's case while I take the phone calls.
I also use Bluetooth headset for listening to music pretty extensively which would be different than a phone BT headset. I would hope that I could use both bluetooth devices with the x7500 at the same time.
Ok...what are your favorite BT phone headsets with vibrate?
Thankyou!
Most people around here have gone with the Jabra BT8010.
thomasz said:
It really depends on how much you want to spend on your bluetooth headset. Also how easy are you to be satisfied?
I would recommend the Aliph Jawbone 2 bluetooth headset. It has this "noise assasin" technology where it eliminates outside noise during your calls. So your voice and incoming calls are extra crispy. But this bluetooth ranges from $100+.
Here's a youtube video on it:
http://www.youtube.com/watch?v=jIq1ETJeky0
Click to expand...
Click to collapse
Jawbone 2 does not have vibrate. Plus I spent all that money on it and found: (a) not comfortable to wear, (b) poor performance in staying connected, (c) people complained about quality. I'm not sure what it is about me, since others seem to love it. But for me, it was a tremendous waste of money. I moved on to the Sony-Ericsson which has been much better.
Jabra BT8010 did work well for me. But it's just so huge...
Another vibrating option is the BlueAnt V12. Which is a good value for the money. Mine broke and I wish I had just bought a replacement for it.
Final comment -- if you got the dough, look into the Sony-Ericsoon MBW-150 watch which vibrates and displays messages of all kinds. Then you don't need your headset to vibrate.
there is nothing smaller and more confortable than the Jabra BT8010
it's simply the best headset for any device
I appreciate the suggestions...sounds like Jabra BT8010 would be one to check out. I currently have a Motorola HS850 but people are telling me they hear an echo and it is driving them crazy.
Another question.....I am having issue with music playing thru BT headset receiver which is separate from my phone headset when my phone headset is also active with the HTC 7500 (waiting for a call). The music starts dropping some and becomes inconsistent. Thus, 2 bluetooth devices are active at the same time even though really...it is only the music BT player that is being used. Seems like my best bet is to leave BT phone headset off until I get a call and then turn it on. Anyone have any advice for me if 2 BT headsets active is a problem for music or other recommendations on how to handle this situation. Thanks!
Have you tried upgrading your radio ROM? I had awful bluetooth issues (crackling on my end and the other end) until I upgraded from 1.47 to 1.57. I'm now on 1.58 because it has a major data speed boost but I'm getting occasional blips on my end again. People on the other end don't hear anything, so with the speed improvement I'm sticking with it. You might try upgrading - maybe first to 1.57.
How can I tell what version my Radio ROM is? Then what is the best way to get the software to upgrade? I would like to learn how to do this.
Also, do I need to upgrade A2DP on my device?
When you first boot its one of the numbers on the lower right. I think its the middle number.
Or you can go into Start>Settings>System>Device Information
First you need to fully unlock your Athena. There are several threads on this here, one of them has the software. Then you need to find the thread with either the 1.57 or 1.58 radio. If you are often in a 3G area I recommend the 1.58 radio, you will get much faster Internet connections. Otherwise I feel 1.57 is more stable for bluetooth. Note that when you unlock and again when you upgrade the radio it will do a hard reset, so copy down any settings and back up any files before you do it, and wait to restore everything after you upgrade the radio ROM.
It would be a good time to try one of the many OS ROMS around here, if you are interested.