Hello there,
I would like to change the default western European language for outgoing messages in pocket outlook into default Central European Windows.
Thing is, now I need to go into MESSAGE OPTIONS in the MENU and change the language into Central European every time I send a message.
Is there a registry tweak which would enable me to have Central European Windows for ALL outgoing messages?
With WM2003 it was enough to change the general language settings into Polish and automatically all outgoing messages would show CE fonts.
With WM5 this seems not to be the case. If I prepare a message in CE fonts, these would not show when the message is received by the adressee. But maybe a registry tweak would do? Anybody tried already?
My friend [CpD]bob promted me.
I changed HKLM\nls\SystemLCID value date from 409 to 419 (hex) and rebooted.
Now I have russian codepage as default language instead of western european language.
This can use Wizard's owners too.
Thank you DiscoStar. Further to your indication I found out that the value for Polish is 415. However if I change it and I reboot, it comes back to the default 409. Any ideas?
OK, it works. I applied the above tweak using 415 value, I switched the device off and waited 10 secs. After the soft-reset the value stays on 415 and the defalult language for outgoing messages is Central European ISO.
Now the Polish fonts can be read by the receiver.
I guess it did not work in the first place because i didn' switch the device off and didn't wait the 10 secs. I read somewhere that this is needed for flushing the cache.
Thanks for the tip.
Related
After hard-resetting my mini and loading ROM 1.11 then not loading the extended rom ( reset prior to installation ) I notice when I dial a number on the phone, it now reads (993) 137-83 instead of 9931 3783
Any ideas as to why? Am I supposed to run a particular cab file?
thanks in advance
frigit said:
After hard-resetting my mini and loading ROM 1.11 then not loading the extended rom ( reset prior to installation ) I notice when I dial a number on the phone, it now reads (993) 137-83 instead of 9931 3783
Any ideas as to why? Am I supposed to run a particular cab file?
thanks in advance
Click to expand...
Click to collapse
The short answer is YES, its in one of the CAB files but I don't know which one. If I hat to guess I'd go for the "default_103133" CAB.
What i did was test each CAB file to see what it changed but didn't write it down. :roll:
Try playing around with the regional settings... example if u use english (australia) the bracket will be gone or if u use english (united states) the numbers dialled will be according to the standard format there which has brackets. good luck.
::adit
Thanks folks, Adit you hit the nail on the head. My regional settings were set to United States. Much appreciated.
hi. im in sydney wit xda2mini, set my region to english aust.
in my contact i have like this : (04) 0157-5243 for mobile phone, which is very bad looking. can some1 tell me how to change it to 0401575243 or 0401 243 575.. as long it doenst have bracket, then im happy
maybe this is because my outlook? i sync my xda with outlook 2000. i tried to change outlook setting but couldnt find the correct option like region or something. thx every1~~~~~~~~~~~
Check ypur regional settings on your PDA.
START, SETTINGS, REGIONAL SETTINGS, make sure it is selected to ENGLISH (AUSTRALIA)
I have changed this setting and I still have the numbers looking stupid with the brackets.
Might it have something to do with how outlook handles the numbers?
yes, thats what i said in prev. post. if i insert new contact FROM XDA, then i wont have bracket. but if i create new contact FROM OUTLOOK, it will make 1st 2 digits inside brackets. i couldnt find any setting in outlook to modify this.. some1 can help? thx
Outlook
Lads,
This is an outlook querk. If you go into a contact and enter a phone number or tap the edit button next to a contact you get a window which has three enterable areas. Country code, NDC (National destination code) or area code and number. Outlook automatically formats the number into
+<country code> (<area code>) <number
You can stop it from doing this but it can be helpful when its formatted like this. I've changed all my numbers to this format.
Re: Outlook - how to remove brackets on numbers?
latts said:
You can stop it from doing this but it can be helpful when its formatted like this. I've changed all my numbers to this format.
Click to expand...
Click to collapse
So how do you stop outlook from doing this?
adit said:
Try playing around with the regional settings... example if u use english (australia) the bracket will be gone or if u use english (united states) the numbers dialled will be according to the standard format there which has brackets. good luck.
::adit
Click to expand...
Click to collapse
This bracket thing is really annoying me too.
Is there any English (Indonesia) or English (Singapore) that don't use bracket? Or should we change to English (Australia)?
Hormat saya,
Arto.
UK
Try UK regional settings. No brackets
i believe the problem is at the OUTLOOK side, not from the xdamini. like i said, (mine set to english australia) if i enter new contact FROM XDA, then it will be stay without bracket, but iwill have bracket if i create new contact FROM OUTLOOK.
I think it will only add brackets once you edit the number. I think Outlook sees spaces in the phone number as telling it what is the international code, area code etc. If you leave the number as +11234567890 I think Outlook ignores it.
I had mine as a mixture but prefer them with the brackets and so edited them.
Its definitely Outlook not the phone
Hi all!
How can I enable auto-suggest feature in inbox? I mean when I start to type in the TO field the device should offer a few contacts starting with the letters I type. This worked for me on my other devices, but not on Diamond.
Currently I can only tap on the TO text, then it slowly opens Contacts app, where I search for a contact, then it opens another screen where I can select which number I want to use. This is way too complicated!
EDIT: I see that if I use the built-in keyboard it does suggest ONE contact and I need to hit the arrows multiple times to get to the right one. However, if I use any other keyboard (like e.g. Resco Keyboard which is my default one), no contacts are offered at all.
Thanx
Still no joy
I found this info, but it still does not work:
"If you want Auto Complete function in "To:" field in SMS app, go to HKLM>System>Inbox>RecipientAutoComplete and change value of the string MaxSuggestions. from 0 to 4 for example."
Half-solution
I found a solution at http://forum.ppcgeeks.com/showthread.php?p=241036
This hack works, however disables the default auto-suggestion of the built-in Touch keyboard. However, I do not intend to search further, this is a completely acceptable compromise for me:
"The culprit is Xt9, when it's enabled it disables sms name lookup, so disable XT9 and whalla. Instructions... browse registry:
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409\Ime File
set the Ime File value from \windows\eT9ime.dll to compime.dll"
You may also need to add these registry entries (not sure):
HKLM>System>Inbox>RecipientAutoComplete
MaxSuggestions (DWORD): 4
HKLM>System>Inbox>RecipientAutoComplete>SuggestionGenerators:
email (STRING): "{364D1505-915A-4b1d-85A6-8C258B2D2246}"
phone (STRING): "{45EEED9B-898c-4caf-BC3E-A5422F56085B}"
Hope somebody will be happy with this finding
aczelkri said:
I found a solution at http://forum.ppcgeeks.com/showthread.php?p=241036
This hack works, however disables the default auto-suggestion of the built-in Touch keyboard. However, I do not intend to search further, this is a completely acceptable compromise for me:
"The culprit is Xt9, when it's enabled it disables sms name lookup, so disable XT9 and whalla. Instructions... browse registry:
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409\Ime File
set the Ime File value from \windows\eT9ime.dll to compime.dll"
You may also need to add these registry entries (not sure):
HKLM>System>Inbox>RecipientAutoComplete
MaxSuggestions (DWORD): 4
HKLM>System>Inbox>RecipientAutoComplete>SuggestionGenerators:
email (STRING): "{364D1505-915A-4b1d-85A6-8C258B2D2246}"
phone (STRING): "{45EEED9B-898c-4caf-BC3E-A5422F56085B}"
Hope somebody will be happy with this finding
Click to expand...
Click to collapse
Hey i was looking for this since long. But the problem is that when i try to change the registery key it says access denied. How to change it. I am using Ceregistry editor. This doesnt allow me to change the value.
bump.............
registry editor
I am using PHM registry Editor. I have not had any problems with it.
Actually I have this problem not in SMS but in email. I don't get any suggestions at all even without TX9.
Does anyone have a fix for this please?
I am running Nataly 2.6 ROM and both SMS and email have auto-suggestion enabled. However, I have seen some posts complaining about email not working (on other ROMs). Don't know the answer for this one, sorry
Hello!
After every Call or SMS I get this annoying bubble popping out of the phone icon in the task-bar after every outgoing call or message. It reads - "Balance: 00.00 Cost: 00.00 Duration: 0:0:0". Is possible to end this?
I am sure that one of you genius developers/researchers must have a solution to this problem.
If you have a custom rom, It's probably a built in feature that comes with the rom,
You'll most likely be able to disable that via a registry edit (Use any registry editor e.g. Total Commander)
But you'd have to ask the cook himself which registry edit though, <=> No trouble with Tess 1.6
I think that I can use this to SMS:
Disable SMS Send Notification
HKLM,"Software\Microsoft\Inbox\Settings","SMSNoSentMsg",0x00010001,1
Or
Advanced Configuration Tool v3.3 customized for Topaz.
But to the call I dont now.
I called my operator and they said it was normal and automatic. And they did not know how to change that. It is the server that makes it his own ...
Theres a particular problem been having that i just recently found out
My N1 and my mom's 1st gen iphone can send and receive Chinese text messages.
N1 can also receive from everyone but when sent, a lot get symbols instead of the Chinese characters like boxes or stars...
recently tried with a new iphone 4. i can receive their chinese text messages but i cant sent it to them. they get weird symbols.
any ideas why this happens?
I think it's probably because of the unicode setting in the app you use, you would need to change it to the same/common unicode set for chinese characters that other phones use.
Yes, how did you send the text message? By forwarding it or typing it out? Which application did you use to send it? The stock messaging app or a 3rd party app like handcent or chompsms?
And which keyboard did you use to type chinese characters? And is it Traditional or simplified chinese?
I just sent a text message to my colleague successfully by typing in simplified chinese. The keyboard I'm using is Smart Keyboard Pro with ZH chinese installed.
Btw, you should ask this in the Q n A forum instead...
just stock normal text messaging.. the input method i have is google pinyin. i also have hanwriting IME but i forget characters a lot of times so i go with pinyin to type messages.
how do i check the unicode settings on both sides?
Can we know more about your phone? Like whether stock? Or custom rom?
Also what language is your phone in? Check in settings -> Language & Keyboard
stock 2.2.1 build FRG83D
language is english (united states)
That is weird. I just set my phone to English (USA), sent a chinese text message using google pinyin to a nokia phone and it sees the text without fail.
Is there another English with an Asian country in the language settings?
Also are you in Asia or America? It's unlikely but if you are on Google Voice (only in america) there are problems sending non english text on it.
If not, you might have to uninstall google pinyin, reboot the phone and reinstall google pinyin again to try it out.
He can't be using Google Voice to send messages, since the Voice app just gives an error when you try to send Chinese messages.
I'm on T-Mo in the US, and I send Chinese messages to my friends iPhone 3GS without problems.
in the USA, using T-Mobile. No data plan.
can send/receive chinese texts to 1st gen iphone with no problems. other phones like the iphone 4 cant.
Been trying to get this to work on my Nexus S, whenever I used the voice search facility to send a text or email, it just took me to the internet search page.
Anyway I am based in the UK and by default my Language is English (UK).
You have to change your default, go to: Settings/Voice input&output/Voice recognizer settings and change your Language to English (US). and it now works perfectly!
Hope this helps...