I have a strange problem:
After beeing abroad in France, my prophet does not find or connect to the german T-mobile GSM network anymore.
Other networks are working and my T-mobile SIM card works with other mobile phones.
Factory resetting and updating to a newer ROM / radio ROM didn't change anything.
In France, I used the 'Orange F' network, is it possible that they somehow locked the phone to their net?
Does anyone have an idea?
Thank you!
Joachim
HTC Prophet (O2 xda neo)
IPL 2.15.0001
SPL 2.15.0001
GSM 2.30.21
OS 2.15.13.27 WWE
Related
I've got a big problem as my XDA failed to detect GSM900 home network in Malaysia after upgraded my XDA1 to
rom 4.01.16
date 02/04/04
radio version 6.25.02
Protocol version : 324e4
The line just keep searching and i have no idea how should i deal with it....
Please help.......
from malaysia
I think you might have used T-mobile (USA) GSM 900/1900 phone (PW10B1) radio stack (radio version 6.25.02 ) to upgrade your GSM 900/1800 version phone (PW10A1). If so, you won't get signal! you have a dead phone, only PocketPC!
Phone is not dead! try this..
I got same problem here, the solution is simple
try to get into bootloader of your XDA , (search on xda-developers how to do it) and change band to your using bootloader
after this DONT touch the band selection tool in phone settings
More help on priv if u need.
If your device is PW10A type (rear sticker), carefully try the RSU 3.25.01 from Carrier Devices then select the right band from the GSM menu in the boot loader.
My T.Mobile Show's Its Unlocked But It Dosen't Work. Help
Hi I Have A T.Mobile Xda With
Rom version: 3.17.13 ENG
Rom Date: 05/15/03
Raido Version: 6.18.00
Protocol version: 324e4
Its got a xda developers bootloader image,
I Think Its A Special Edition ROM,
But Its Not Taking A Hutch sim It Show's No Signal When I on The Phone,
But Its Working Fine With A Skycell Sim.
I Tried Unlocking It But It Show's The Phone Is Already Unlocked.
What Do I Do Please Help.
Thank's In Advance.
Don't know much about your gsm networks, but your device is for 900/1900 MHz networks.
Be sure, your Hutch network uses 900/1900 and not 900/1800....
You told us, that your skycell sim is working. That means, that your device is already unlocked.
Another possibility is that there is a problem with the sim card. There have been a few postings, that some users have problem with their sim card. They used a new one of their provider and they get it working....
HTH
Stefan
hi, amazing website i must say, but since im new to this site and lagging too in the info i would hence ask the question here to get the answer to my problems:
1) i have qtek 1010
ROM version 3.18.04 ENG
ROM date 05/22/03
Radio version: 3.25.01
protocol version 32S54
at the back: PW10A1
i have a middle east gsm roaming chip, which worked all over europe, but in canada it doesnt pick the local fido network. i believe my qtek is dual band not supporting the 1900mhz, how can i make it work for me ? could you please advise the steps ?
2nd question is:
my qtek is microsoft version 3.0.12039 (build 1178) does it need to be upgraded ? if yes with what software pls.
thank you in advance.
Guy
there is no way to make PW10A device to use 1900 ... but it should work for 900 if your network supports 900/1900
im trying to roam on fido , does fido use 900 ?
thanks
have htc touch diamond gsm
after flashed from sweedish to italian spl 1.40 oilnex it cannot reach my network service
i have just upgraded my htc touch elfin with a cooked rom.
the phone does not connect phone network.
i have a newly purchased vodafone india sim.
my
rom version: 3.14.706.02.wwe
radio version: 02.98.90
plzzzz help
If you have CID unlocked your phone
try upgrading the Radio too.
Try 3.34.90 from here.
Regards!