Hello,
Apparenlty does the bluetooth carkit Nokia CK-7W supports all bluetooth phones that have BT Handsfree profile.
Does the qtek support this Bluetooth Handsfree profile or does it supports only the headset profile.
or are they the same BT profile?
Thanks
sorry....
You wonn't be able to use it....although you can pair it the profiles don't match.
I own a bluetooth Nokia CK-1W carkit (has the same problem) and it's been difficult to use with my Qtek.
But for now i can receive calls via carkit. Better then nothing at all (if you don't want to remove the carkit).
You must install the Pocket Bluetooth Tools http://www.angeltowns.com/town/bluetooth/
Install it and delete any paired device you have.
Pair up with the carkit and select HEADSET profile.
Then, when the phone rings, bluetooth turns on automaticaly and pairs up with the carkit, then you press the Nokia button and talk.
It works for receiving calls through loudspeaker only.
I've contacted the author of the Pocket Bluetooth Tools and he already knows this bug and should be fixed next release.
Thanks for your answers.
Apparently this new nokia carkit has the pretency to be universal.
If the BTtools can help older carkits, I suppose we can expect that we may make this new one work with the qtek.
Or you can try the Ericssion HCB-30. I have that installed and it works everytime. Now all I need to figure out is how to boost the antenna power of the XDA unit :roll:
he HCB 30 works fine. I'm testing now a techart carkit.
Does any one have tested this nokia carkit?
This could be a very good alternative for BT carkits.
Does anyone tried to connect the XDAII with the new HP BT stereo heaphones with XDAII?
I have this HP device but can not install it.
Bummer..
Widcomm BT Stack on XDAII...
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Interesting. Will check it out and reply.
This is my experience using a HP bluetooth stereo headphone bonded with an O2 xdaII. I use Wincom 1.5 Build 2000 from "dtktvu". So far the setup has worked very well. After having used the setup for three weeks, my impression is as follows:
1. Connection with headset is very stable
2. Stereo sound is clear, quality is quite superb really.
3. So far this setup works only for music, it does not work together with bluetooth headsets (if you happen to have one). This means that you can not use your headset at all while using the headphone.
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
5. You have to use Windows Media Player as the player for point 4 to happen. I am not sure how the setup will react to incoming calls with other players such as Winamp, GS Player etc..
6. Battery life is quite good. I get about 6-7 hours of playtime from the headphone.
Now, if only someone will update this Wincom Driver further so that it can work together with bluetooth headsets, then we will have the best of both worlds... Maybe donations from potential users to provide incentive to some expert out there.
Widcomm BT Stack - Get it here
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
You may need this key as well
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
"driver"=""
Thank you to dtktvu
Widcom on XDA II without Windows Mobile SE?
I would also like to use the HP bluetooth headset. I have a XDA II (not IIs). Will the Widdcom stack install on this? I am currently not running Windows Mobile SE.
Many thanks.
keys
where do we copy and paste those keys? do you think this could work with the Magician?
khanh_xda said:
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
Click to expand...
Click to collapse
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.
[/quote]
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.[/quote]
Thanks for the pointer, didn't work though.
Would welcome any other ideas.
Will this work on XdA2JoJo.v3.2zS version that has broadcom 3900? I'm planning in getting one.
Need advise...
Thanks
HP BT stereo headphones with XDAIIi
Hi,
I've read the thread but cannot see any indication of someone using an XDA IIi and the HP BT stereo headphones. Anyone know anything about this particular combination? So far I know the software that comes with the HP BT stereo headphones will not install on the XDA. And without the BT high quality audio profile installed I cannot get past pairing the devices. Any ideas?
Thanks,
R
Re: HP BT stereo headphones with XDAIIi
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
someone tried hp bluetooth headset with wm5?
Re: Widcomm BT Stack on XDAII...
dtktvu said:
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Click to expand...
Click to collapse
Other than the hp headset, does it work on i-tech clip S or i-tech clip S35 bluetooth stereo headset as well.
Re: HP BT stereo headphones with XDAIIi
hahol said:
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
Click to expand...
Click to collapse
install where ? :?:
has anybody done it this way !
Bstard said:
someone tried hp bluetooth headset with wm5?
Click to expand...
Click to collapse
anyone an idea? i want a bt headset (hp) but not willing 2 go back 2 wm2003
headsets
I have three stereo bluetooth headsets here for testing purposes:
- Logitech Wireless Bluetooth MP3 Headphones for PC (aka Hewlett Packard FA303 or Toshiba PA1831)
- Motorola HT820
- iTech Blueband
I have tested them on my Qtek 9090 (BlueAngel) and they all worked fine. There is not much diffrence in audi quality, the diffrence is more in the comfort of wearing them. Most of my collegues liked the Motorola the most but I prefer the Logitech. The iTech feels a little bit cheap...
More experience and info about stereo bluetooth headset is posted on http://www.robertwebbe.nl/A2DP.html.
Has anyone connected headphones with XDAII? i can't at all( after installing broadcom 1.5 phone cannot call correctly, i can't hear anything(
I have a iMate PDA2k EVDO & iTech BlueBAND headpones. I was able to use use the BT headset to use the phone however as the Broadcom 3500 stack didn't come with a Audio profile I couldn't hear music (mp3s via WM10). I installed Broadcom 3900 stack - can now hear stereo music but the volume on the phone is so low I can bearly hear it. Otherwise my PDA is stock standard Windows 2003 WWE etc. Any suggests? As I am a new owner, I would appreciate the help. Cheers,
Hi
I have recently received a Blue Angel from our mobile provider and it comes with the Bradcom stack 1.0.0.3900.
Does it have A2DP integrated, or I need to install anything to make it compatible? I am interested on a Motorola HT820 headset and i want to make sure it will be compatible...
Broadcom Bluetooth stack for Benq P50
Hi,
Has anyone tried installing the Broadcom Bluetooth stack onto a Benq P50 Window2003 2nd edition? Thanks.
Cheers!
hi guys, i bought a new o2 xda2 from my friend. he also had a logitech hs02-v bluetooth headset working with it. i took the headset to try but it didnt communicate while the xda2 had paired it.
i tried other headsets but no one worked.
xda2 finds the headset, make a pairing(i enter the passkey 0000) and then nothing....
so please help me
Connect the headset to the PC using the utility provided and change the paskey to any other(Like 1234) and then try pairing it...
Most probably it should work fine...
---------------
Sanjeev K Purohit
Did you turn your "Bluetooth Profile ON"?
After you paired your bluetooth-device.
You need to turn bluetooth on (by click at bottom right at Bluetooth icon).
and To turn bluetooth headset on, You need to click at Bluetooth Profile to make it on.
The Bluetooth Profile is stay on your Today screen.
:?: :shock: I have exactly same problem, using latest official rom and stuff - no bt tools or something.
Update: Works with BTTools :idea: 8)
Update of update: It seems that headset needs pairing each time after you turn it off and on. :shock:
I just got the logitech one this morning, it works ok with the MS stack, but I prefer using the widcom stack.
When I use the widcom stack the icon saying that I have the bluetooth headset is there, but the calls dont get channeled to it.
Is it possible to use the widcom stack for headsets? Or is it simply an incompatability?
ok i simply hard reset the device and the profiler brought bluetooth profile. now its ok.
anyone with this combo?
i have applied the a2dp hack, currently using the aku rom 25Apr06[dopod].
Paired up successfully, selected headset/Handsfree/stereo.
music able to stream in good quality.
however, everytime i turn off my r35, turned it on again and allow the dopod and r35 to reconnect, i will not get the wireless stereo enabled automatically...
is this supposed to be normal?
Hi, I have the same problem as you with a Bluetake I-Phono Mini headset. I was wondering if everyone has this problem, or if some people can actuall get their prophet to go into wireless stereo mode just by clicking on a button of their headset?
up this thread for response
hi farbird,
Have your problem resolved? I got the same problem with R35 too.
got me m1000, gave it my dad, he has a motorla h500 bluetooth headset, when it used my jabra heatset, since died. no probs, it will pair and bond and install teh headset profile but i cannot use it as a handsfree.
any ideas of a fix?