I am trying to unlock new Cingular 2125 (a.k.a. HTC Tornado). It came with ROM version 2.013.0.
An when trying to use look lokwiz 03a or 02b, after RAPI unlocking, message appears: "could not update itsutils.dll to the current version,maybe it is inuse? try restarting your device or restart active sync"
Tried copying EnableRapi.cab to the device but cannot install it. The error message "...this file in not intended for this device"
Any help appreciated.
Thanks, tpack
I think as the message says this software is not for this device.
Related
Hello all, I took the bull by the horns this morning and upgraded my PPCPE to 4.00.16 ENT T-Mobile US from JSummers ROM Kitchen.. I used the EXE installer and everything works fine.. I did have to upgrade form Activesync 3.6 to 3.7 once the upgrade was done..
Tonight I decided on trying some new options from the kitchen and downloaded a new EXE.. (still 4.00.16) just with EzWap2 this time..
But the EXE installer won't see the PPC anymore, even though active sync sees it and it syncs just fine. A DOS window comes up and says "ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connectiontype." The installer window still shows up though.. When I click next to install I get a windows popup box that says "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR - Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected." When I try again I get another dos window that says "ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. Error getting devicedata".
Am I doing something wrong here?? I've tried the SD method but apparently my SD card writer/reader isn't compatible with XDArit and it writes sucessfully but won't read the card back and the PPC doesn't recognize it as valid..
Help!
:shock: Have you read small notes beside the rom version which tell you to be very carefull before using rom 4.00.16. The notes telling you that after you flash with that rom version will unavailable to reflashing or downgrading with other rom version. Sorry, only this far I could help you cause I'm still a newbie to.
You can go back to a different ROM or the same with more stuff like your situation. BUT you HAVE to do it the SD card way. Search the forum and you will find more info about this. (SD card method)
I have tried to install an upgrade for my xdaII. Unfortunately it was UK upgrade I started to install into my Asian xdaII. Halfway through the installation there was a ROM version error and it has rejected installation.
Now there isn't any software or an operating system in my pocketpc. There is no way I can sync this with my pc for the installation of the correct version.
Can anyone help?
there is this guide
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
you can extract the nk.nbf file from the UK upgrade and use xdanbftool.exe to modify the language ID then re-flash your device.
In your case, you should have a frozen dimmed screen with the word "Serial" on top and the boot loader version towards the bottom of the screen ... if by inserting the device into the cradle the word Serial changes to USB, this means the boot loader is still in function.
Good luck
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
I did modify nbf headers using xda2nbftool and changed device type, operator and language but still getting following error message:
"ERROR 102: CE Image file checksum error"
"The ROM image file to be used for the update is corrupt. Download correct ROM update and try again"
Can you please help!
Isn't there anyone who can help me soon???
can anyone help? i was trying to update the software on my m500 when halfway through it came up with an error message saying it was the wrong country, i then tried to run the file that overcomes this but it will not run it comes up with Ruu.dll cannot be found.
Since then i get an error message saying no gsm when the phone reboots and am unable to use most of the programs
HELP PLEASE
You need to download from the file MaUpgradeUT_noID.exe from the ftp. There are several threads in the Magician Upgrading forum with tutorials.
I just bought a used TMobile MDA. I was told that the phone was unlocked. When I tried to flash the phone it losses connection and I get the error ROM UPDATE UTILITY MFC APPLICATION failed. Can someone help me figure has what is causing this problem and how can I correct it so I can update the ROM on my phone.
IPL 3.08
SPL 3.08
GMS 02.69.11
OS 2.26.19.2
Any help will be wonderful.
Is your phone in Bootloaders or boots up into a working OS,if its working,download WST_4.2.2 tool and run the 'CIDAction' button to verify its CID lock/unlock status,then do accordingly.
zabardast_1 said:
Is your phone in Bootloaders or boots up into a working OS,if its working,download WST_4.2.2 tool and run the 'CIDAction' button to verify its CID lock/unlock status,then do accordingly.
Click to expand...
Click to collapse
When I tried to run the CID Action on my phone I got this:
Error! No device detected!
Try reading again; if it fails again then check cable
connection and be sure that ActiveSync's icon is
green.
Be sure to enable RAPI communications and
Applications Policy!!
I made sure that the phone was connected and then I tried to make sure RAPI communication and Applications policy was enabled. I got the same connection failure error. I don't know what to do to correct this error.
Does the phone establish connection or activesync through usb ? if it does,than,there are two files in the installation folder of WST_4.2.2 in the 'files' folder 'EnableRapi' and 'Cert_SPCS' copy these both zipfolders anywhere in your phone and execute them in the phone,then run the WST Tool.
zabardast_1 said:
Does the phone establish connection or activesync through usb ? if it does,than,there are two files in the installation folder of WST_4.2.2 in the 'files' folder 'EnableRapi' and 'Cert_SPCS' copy these both zipfolders anywhere in your phone and execute them in the phone,then run the WST Tool.
Click to expand...
Click to collapse
Yes, the phone does establish connection throught activesync. I did install both files, EnableRapi and Cert_SPCS, and excuted them the phone. WST still gave me the same error.
which windows are you using and what version is Activesync ?.
'MFC' (Microsoft Foundation Classes) failure is usually ,when certain application/program fails to initialize.
Do this all on winXP SP2 and use latest version of Activesync 4.5.Close/disable any Antivirus/Firewall running and try to end as many applications/programs running in the background through 'Windows Task Manager'.End Process 'WCESCOM' something running in the Task Manager.
I have a HTC Cingular 8525 with WM6.1, I was doing an upgrade to WM6.5 and I do not want to display the PPC WM6.5 and not acerita the installation of another ROM. Anybody know how to sde can insert another ROM, but would have tried the following warning appears:
(200) ERROR: INVALID UPDATE TOOL
Please get newer update utility.
Has lost the device?