I use 802.11b (Wireless Networking) with a static IP address. I tried to configure the T-Mobile MDA, but was unable to get it to work. I contacted T-Mobile tech sppt and they told me the MDA does not support static IP. On investigation, I found this was wrong, and am posting the solution here in case anyone else hits the problem.
To configure a static IP address go to start / settings / connections / Network Cards / Network Adapters. Select SDIO WLAN Wireless Adapter. Select the IP Address tab. Set the IP address data.
(When you try it, remember to turn WLAN on.)
wow, they gave you a serious misinformation. we've been able to set static network configuration like that for years.
Related
Hi guys,
I don’t know you guys can help me or not well My problem is
I’m trying to connect my I-Mate PDA2k to Senao Wireless Assess point my access point connected with my network switch .My access point showing WAN light and on my mobile also showing “W” its mean PDA getting signals but I can’t access internet from my PDA.
I don’t know how to configure access point I took access point without catalog and serial cord I don’t we use serial cord or not.
In simple words I want 2 access internet without GPRS.
Information:
SENAO
2-port switch wireless router printer server
SL-2511SR PLUS(F200)
MAC 005018578BO
I-Mate PDA2k Microsoft
OS windows 2003 CE
Local network
IP Class Local = 192.168.0.XX
Internet Sharing = ON
Look for help on configuring your the Senao web site for configuring your wireless router: www.senao.com.tw. I have an access point and it's working like a charm with my Blue Angel.
If you don't have a DHCP server or you have not configured your wireless router as a DHCP server, follow these procedures on your PDA:
Tap Start, Settings, Connections (tab), Network Cards (icon), Network Adapters (tab), tiacxwln Compatible Wireless Etherne....
Then check: Use specific IP address. You'll need to set values for IP Address, Subnet mask, and Default gateway. You IP address should be (quoting you) something like 192.168.0.xxx and subnet mask is probably 255.255.255.0
Also be sure to tap on Name Servers, and fill in the info there, you'll need a DNS address to access the Internet.
Finally, to configure your proxy server, go back to Connections, Advanced, Select Networks, and create a new connections and configure the proxy server accordingly, if it exists. If you're supposed to connect thru SecureNAT (ie Default gateway), you can simply ignore this step, or create a network profile that "connects you to the Internet" without specifying a proxy server.
Hi all,
I live in a property next door to the company i work for, and the network is linked into the apartment. I have a Wireless Network Access Point in my apartment.
The thing is....DHCP is deactivated on the whole network, and everything runs through proxy servers.
To do this, I need to choose the option that my wireless access point (called scanthor) is used to connect to Work right?
Also, I have gone into settings, connections and modified the proxy to be correct. However, where can I set a valid IP address for the connection??
I'm guessing in Network Adaptors setting right? But which one is the wifi card, there seems to be about 5or 6 in there!
Hope someone can help, thanks in advance!!
Ben Kay
p.s. Using O2 XDAIIi
Try | Start (menu) | Settings | Connections (tab) | Network Cards (icon) | Network Adapters (tab) | tiacxwln Compatible Wireless Etherne... | Then check Use specific IP address. You'll need to set values for IP Address, Subnet mask, (most likely 255.255.255.0) and Default gateway. Also be sure to tap Named Servers, and fill in the info there, you'll need a DNS address to access the Internet.
Still not working..... I've set my IP address under tiacxwln Compatible Wireless Ethernet Adaptor. Also put in gateways, dns server etc as taken from ipconfig on my desktop work computer.
Then, i have set the wireless network to connect to "Work" and in Network Adaptors, under the box ..my adaptor connects me to...work is selected there also.
Finally, under connections and "My Work Network" I have put the proxy settings in correctly (just Http and socks)
No luck though. Sometimes it works but unbelievably slowly, sometimes nothing...very annoying.
The proxy server is AVM Ken! www.avm.de
Is this the problem?
Ben
Hi Guys!
I've been reading here as a guest for a while and finally took the leap to buy an iMate Jasjar. So far so good, buuuut...
I am trying to connect it to my home WiFi LAN and having some troubles.
The home WiFi AP is set to up as a gateway and connected to a router (ie AP = 10.0.0.10 and Router = 10.0.0.3). Therefore, a device connecting via a DHCP client which doesn't allow the gateway to be specified isn't very useful.
On the JasJar, I would like to be able to specify the IP, NetMask, Gateway, etc. Is there a way to do this?
Similarly, when I select the 'Configure Network Authentication' window on the JasJar and select Authentication = WPA and Data Encryption = TKIP, it auto-checks the 'The key is automatically provided' - which it isn't! The key needs to be manually entered.
Worse yet, in the next tab "Configure Network Authentication" it forces "Use IEEE 802.1x network access control" for PEAP (not supported on my AP) or "Smart Card or Certificate" (I have no smart card and I have no idea how to issue a certificate).
So sorry to be asking what must seem like gross newb questions, but I'm so keen to use my Jasjar with my wifi.
Is there a chance someone might know the answers?
Kind Regards - Virgil.
WiFi Connectivity
Is your AP a brodband router if so check DHCP configurations add the gataway to your DHCP config.
Explain what device you have probably some one may help you.
Kind regards
Howlingwolf
Thanks for the reply.
The devices in question are:
* JasJar (PPC/PDA, etc)
* Linksys WRT54GC (AP)
There does not appear to be provision for a general routing entry (ie all connections route from 10.0.0.10 (the AP/Gateway) to the router (10.0.0.3)). Unless I'm really missing something.
Cheers - Virgil.
EDIT: Entered bad IPs.
So I never had an issue connecting using DHCP. Then I changed my network so everything has a static IP address. I assigned an IP address on my T-Mobile MDA and now it will not connect to the internet. It does however seem to be connected to the wireless router.
When I use IE or Opera it looks for the host then a get an error message. Occasionally it will look up the site and downlaod the webpage but this takes a very long time. Even when I try to connect to my router using the IP address, it does not work therefore its not the DNS entries.
I changed the SDIO adaptor to use a static IP. Should I change one of the other adaptors too?
I have the wireless G hack enabled but even tried with just wireless B.
have u checked and made sure that u have the gateway address inplace? in the connections page check if your proxy server is set up correctly. also make sure ip is within range for the router to use. hope that helps.
Hello,
When looking in the wifi options of my HD2 I saw an option to set a static IP adres with dns etc.
Since I use static IP addresses at home and DHCP disabled, I set it up with a static IP. Works fine...at home. When I was at work I wanted to connect to the wifi there, but was unable to do so, probably because he was trying to use the static IP from home...
Why isn't the HD2 switching between these connections/IP settings?....
If this is not possible, why did they implement the option for a static IP on a mobile phone?
Ty
Just like on your laptop, if you assign a static IP it will keep it even if you move to work and connect there. You have to remove it manually to switch back to DHCP. Nothing uncommon.
If this is not possible, why did they implement the option for a static IP on a mobile phone?
Click to expand...
Click to collapse
Uhm didn't you give the answer? To connect to a network that has no DHCP...
I mean something as network profiles for each wireless network.
For example on my previous phone, a Samsung Jet, when I looked for wireless networks, I could set up everything for each different network he found.
Meaning when I selected my wifi from home he used the settings with the static IP from that profile, and when I was at work he selected the wireless profile with a DHCP IP from work.
Now I only have 1 set of options regardless of where I want to connect.
A static IP is not really "mobile" friendly to
There's nothing to do that by default in WM.
Seems theres an app for it though:
http://www.freewarepocketpc.net/ppc-download-wifi-profiles-v0-0-2.html
A static IP is not really "mobile" friendly to
Click to expand...
Click to collapse
Well, add a DHCP server at home
The static IP address is a setting for the network card, as you well know. The network card does not change just because you go to a different location. Also, due to a bug with Windows Mobile, you may want to forget about using a static IP address. I don't know about 6.5, but with 6.1 it caused my data connection to try and use the same IP address, which was obviously an issue with my service provider, who just refused the connection every time. I was without a data connection for a day, before I figured out what the problem was.