Statis IP not working on Wizard - 8125, K-JAM, P4300, MDA Vario General

So I never had an issue connecting using DHCP. Then I changed my network so everything has a static IP address. I assigned an IP address on my T-Mobile MDA and now it will not connect to the internet. It does however seem to be connected to the wireless router.
When I use IE or Opera it looks for the host then a get an error message. Occasionally it will look up the site and downlaod the webpage but this takes a very long time. Even when I try to connect to my router using the IP address, it does not work therefore its not the DNS entries.
I changed the SDIO adaptor to use a static IP. Should I change one of the other adaptors too?
I have the wireless G hack enabled but even tried with just wireless B.

have u checked and made sure that u have the gateway address inplace? in the connections page check if your proxy server is set up correctly. also make sure ip is within range for the router to use. hope that helps.

Related

XDAIIs wifi aaaarrrghhh - I wanna break it

into teeny weeny little pieces.
I feel so much better now!!
Anyways...I have a wireless home network up and running and would like to connet the xda to it.
I can connect to the router no probs but IE cant connect to the web. it says "the page you are looking for cannot be found".
Any ideas why I can connect to the router but not to the web?
Cheers folks - thanks
I know how you feel. There are a couple things you have to do.
First check that you have selected to connect via "work".
Then ensure that the IP address shown is in the range of 192.168.0.X
had no problems with my wifi on my home network, as ale210p said, I think it's with the way your connect via "work" or "ISP" is configured
hiya folks
thanks for coming to my rescue..hopefully i can get this thing on the road.
- in connections - advanced - select networks. both selections are set to "my work network"
- in configure network adapters - network adapters. the "my network connects me to" dropdown is selected to work.
- where can i check my ip address on the device?
Alhtough I am connected to my wireless network as that what the wireless LAN manager says?
any ideas guys?
many thanks
Is your internet provider checking the MAC address? my provider checks for the MAC address and hence I had to register my MAC address first with the provider.
I'm pretty sure my ISP isnt checking my MAC address as my PC and other computer on the network work fine with regards to internet access and I never gave the MAC addresses to the ISP.
However, my modem router does have mac filtering enabled. I have copied the MAC address of the xda to the allowed list. However I've also tried to turn this filter off and the result was the same....I still could connect to my home wireless network but had the same error message when trying to surf through pocket IE.
Any other ideas on why I can connect to the network but IE wont let me surf?
thanks again
I'm having exactly the same problem as Richard. What I don't understand is, I can drive around and find free residential wireless hotspots and surf the net , but I can't do it on my own WLAN!
IP info OK?
These symptoms could indicate that vital IP info is missing on your XDA.
Does your XDA get an IP address + gateway address + DNS server address from the router's DHCP server? Use vxIPConfig to determine this http://www.cam.com/windowsce.html
I know for a fact that many times (not always) my QTEK 9090 does NOT get the required IP info from my SMC Barricade 2804WBR b/g wireless router, so I started using fixed addresses on my QTEK.
If I use DHCP, many times I can connect to the router but am unable to access the internet... Because the QTEK has not received an IP address/gateway address/DNS server address in those cases. Fixed addresses always work.
whoa
thanks for the advice. i installed the app. rubbed the sticks together and there were sparks i tell you!!! but what does it all mean?
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255
im no tekkie so am not sure what the above means? does it provide any clues?
thanks for the advice so far
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
richard321_blue said:
just an update
i manually inputted the ip address assigned to my xda by the router as i have dhcp disabled on the router.
nonetheless it sill doesnt let me connect to the net but i can connect to the wlan?
Click to expand...
Click to collapse
Fixed IP address is good, but have you also put in the gateway address and DNS server address? Normally the gateway address + DNS server address = router address.
If your routers IP address would be 192.168.1.1 (quite common address), then your IP address could be 192.168.1.2, gateway address would be 192.168.1.1 and DNS server (name server) address also 192.168.1.1.
BTW; this:
the ip address is 169.254.84.245
subnet mask 255.255.0.0
dhcp server 255.255.255.255 <========= !!!!
means that DHCP didn't work!
I suppose that when you state "connect to the wlan" you mean that you can 'see' machines on your local network? Or what? That would make sense because you wouldn't need a gateway address and DNS server address for that normally (broadcasts).
siliconaddict....you're a genius!
finally it works, it works i say.
fantastic.
thanks to all for the advice and feedback - much appreciated.
can i stoke the fire and ask how i can sync via wifi as well?
never done it myself, but here is a guide
I have never synced over WiFi myself, but here are some guides:
http://theillustratednetwork.mvps.org/WM2003/ActiveSync/WM2003ActiveSyncConfiguration.html
http://forum.xda-developers.com/viewtopic.php?p=132820
Please note that the next version of Activesync, version 4, doesn't do syncing over Wifi anymore...
Good luck!
Sorry to be a complete noob, but:
1. How do I find out the IP Address of the XDA (Is it in Wireless LAN Manager, under "current config" and "IP:"?)
2. My Netgear USB WLAN is showing an IP of "0.0.0.0" (on command prompt >> ipconfig) How do I change this?
Thanks
Q & A
A 1: On your PDA use Use vxIPConfig for this http://www.cam.com/windowsce.html. Unfortunately the OS doesn't have a standard utility for it, like 'ipconfig'.
A 2: Does your router hand out IP addresses at all? Or: is DHCP enabled on your router? If true, do you have the correct drivers loaded for that USB NIC? In Device Manager how does it look? Yellow exclamation mark? Can you post the output of 'ipconfig /all'.

Wireless Problem

Done a search on various site but still no joy.
Just got a o2 XDA Mini S yesterday.But I cannot get it to connect to my wireless network at home.Its an open network, with a laptop,3 PC's,2 xbox's accessing it various times of day.All connect no problem.
My xda says my network is available,but cannot connect to it. Do I need to put in IP addresses in manually ? On the network cards section, it the SDIO WLAN wireless adapter that is used ?
Have tried allsorts,
First Question,
Is your WiFi router set to DHCP mode. If so then check that your device is also set to DHCP mode. If not change router to DHCP check that all your other devices are set to DHCP then you should automatically be allocated an IP address. A useful utility is WiFi Companion.
This scans for available networks and allows you to connect. it will also show you the IP address you have been assigned.
You could assign an IP address manually but this will have to be changed every time you walk on to another network. DHCP is better.
Regrads
Thanks for the info DW, it is my router,popped round a mates last night and it connected to his network ok.
Will check what you said and the firewall
not sure by what you mean exactly by open network.
but are you using MAC address filtering?
when I got the Sony Laptop, I was so eager to get it all setup etc, that I forgot bout the filtering, it would see the network, but refused to connect.
I'm having the same problem. My Exec can see the network but not connect. I investigated it a bit more and for some reason it keeps trying to use the same IP address as my laptop. It also cannot connect to the net to update Avant Go when it's syncing (via my laptop).
I've tried connecting with all other devices switched off, to avoid the IP address conflict, but still cannot connect to the internet.
I'm pretty much stumped.
Setting the Wireless power setting for best performance was the trump for me.
On my Vario - Settings - Connections - Wireless LAN - Power Mode
Thanks for the suggestion. I gave it a try but unfortunately it didn't help.
If my laptop is switched off my Exec can connect to my D-Link router, but I cannot access any internet resources. I presume that somewhere in the settings is the solution but I can't find it.
EXCELLENT db44!!!
For some reasons setting wireless "best performance" wortked for me too. Wizard (QTEK 9100 - gray market I guess as QTEK did not register on their site for me). I will still try Opera too.
Kind regards,
Oleg.
www.nano-science.com
same thing happened to my qtek. it detected the network but could not connect and sometimes when it got connected, i still couldn't surf the net. is there anything in the settings that i'm missing? i also tried to enter the IP address manually but no luck either.
My O2 XDA Mini arrived yesterday. It sees my wireless network (as well as two others in my neighborhood) but cannot/will not connect. I've tried everything I've read above - which confirms I'm on the right trail, but...
The D-Link DI-624 wireless router is in DCHP mode. I've dropped all security for connection trials. I've put the MAC address of the XDA in the router, just in case. I cannot find the IP address of the Mini (how do you do that?), but have tried with and without allowing the router to assign it a random and an assigned IP address. My router does NOT have the default (198.162, etc, etc IP address.) so I've been careful not to blindly follow standard instructions. Of course, I have tried with specific IP addresses, default gateway (router), etc, etc.
One clue is that after trying for a long time to connect to the networks it finds, I got one error message from the XDA saying it could not be assigned an IP address from the network(s). Good clue - wish I know what it means.
There are only limited settings to check on the XDA, so I'm wondering if I'm missing something on the router. Any ideas? Many thanks.

Qtek Exec and wireless network

At my home, I have a router wifi and a little net with static IP.
If I try to connect the Qtek to the net by WiFi, it's all ok and the signal is strong, but if I try to open a site by Internet explorer or Opera mini, I have an error: "I can't locate the resource...".
So, I can't navigate in Internet.
Any idea?
are you applying a static ip to the Universal?
does your Router do DHCP?
It sounds like your Univ is picking up the network but not being signed an IP address,
Yes, I have assigned a static IP to my Qtek, I have assigned IP, Gateway and DNS in "tiacxwln compatible wireless ethernet" and it connects to the net very good...
ok, then check the proxy settings in connection manager, i have mine ticked to say internet access, but unticked to actually name the proxy.

DNS no server specified error on all wifi activity - HTC Wizard

i must have jacked something up. first i could not get a wifi connection at home, then i flashed the firmware on the device and asked it to use the mac to connect with static IP and now the pda browsers cannot get any DNS info
netfront states no dns server specified and wireless router log states DHCP Discover no response.
must be a setting somewhere i'm missing.
wireless laptop and wired pc working fine
you can really just use the ip of a known dns from the device too
all dns servers should respond from all devices asking for the ip given the hostname
setup
cable modem to wired linksys router (DHCP on) - DI-524 wireless router connected to wired router (DHCP on)
when you say 'known IP from device' you mean the wireless router? Do you mean have the wireless router give the PDA my ISP's DNS IP?
if so what happens to my ability to browse the LAN since the devices IP is now out of the scope of my LAN
SORRY I THINK I MEAN the error is
<< DNS Discovery no repsonse. >>>
basically no DNS server found when browsing with the PDA when connected to WLAN.
PDA is ok browsing when I connect to work routers. I'm getting IP ok from home wireless dlink router but router cannot give the PDA a DNS server.
ps- wireless laptop ok for DNS connecting to the same wireless router so i'm thinking the firmware update made the dlink not like the PDA
update- i think it's the device and a setting.
now i cannot get to the internet through netfront or ie at work connected to wifi router. same error
DNS no server is specified
can get anything by IP, is wm5 wifi challenged for internet access?
any takers?

Wifi but no Internet

Since I bought the HD2 before 2 month and after 2 Rom upgrade I still have the same Wifi problem. I can connect to my home network and the Router can see the HD2 but I can not connect to the Internet through the Wifi. All other computers and PS3 connect just fine. Ip adress seems also ok.
Please help ?
I did have the same problem a while back, and it occured after I used the wifi router. Have you ever used that, even just to try it?
No I never tried the Wifi Router even once and changed rom twice.
quincy67 said:
No I never tried the Wifi Router even once and changed rom twice.
Click to expand...
Click to collapse
Probably not the same issue then. For some reason I had it trying to give me a static IP address that my router wouldn't allow (I've got MAC forwarding on my router to make sure that nothing other than the 4 things I have can connect to it).
When you connect to the wifi, can you open the router admin on your HD2?
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
quincy67 said:
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
Click to expand...
Click to collapse
No worries mate - I hope I can help!
It's not a proxy issue, if you're not using a proxy server. Could you try this and let me know how you get on?
Start your wifi connection
Go to all settings, connection, wifi, wireless networks, network adapters tab
Select the Broadcom DHD adapter
It should be set to use a server assigned IP address, not a static one. It probably is, but it's worth checking.
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
quincy67 said:
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
Click to expand...
Click to collapse
After you've started wifi, go to the settings tab, menu and all settings. Then carry on the instructions in the last post.
Found the all settings, the DHD adapter is set to server assigned. Any other ideas ?
...
Well i think we have the same problem.. If you try to connect your wireless, do you get the failure after pressing get IP: Cannot obtain serverassigned IP....
http://forum.xda-developers.com/showthread.php?t=627654 my thread was this..
I found out that if i you go under WIFI>ADVANCED>press on the NETWORKCARD under the field "SSID"> then go to the networkcard>Broadcom 802.11 DHD network adapter>remove the pin in use serverassigned, and write a static ip: example: IP: 192.168.1.23
UNDERMASK: 255.255.255.0
STANDARDgateway: 192.168.1.1
That helped for me, though i cannot use that fix because my college wont accept the static IP. so it works for like 2 mins and then it disconnect. hehe.
Heh - that would be pretty much my next suggestion.
Try a static IP address and see if that works. It's not a long-term solution, but it would determine whether it's your phone or the router that's having the problem.
Last time I set a static IP address, I liked it and left it like that, but I found (after a couple of days with no internet access) that it tries to assign the same IP address when you use your data connection for internet access. Your service provider is very unlikely to allow you to use the same IP address, so you probably can't connect.
Like I said, it's a test to see if you can connect - not a solution.
Do you know what IP addresses your router will allow you to use? Do you have a specified range of addresses, for example?
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
skwizod said:
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
Click to expand...
Click to collapse
It also happened to me. Turns out it was the router I was using. I bought a new one earlier today and problem solved!
Hi!
I got a d-link dgl-4300 router, and had problem getting a IP adr. from it. When I gave my HD2 a static IP it worked, but very slow. After I changed from DHD network adapter to NE 2000 compatible ethernet driver it get IP from router and I can browse internet through wifi fast. Maybe it can help u 2.
regards Xes.

Categories

Resources