Ive read that the wlan utility.exe is added to most other Tornado devices but it's not included in the Tmobile SDA rom. I wanna use tmobile and use the wlan utility.exe which can only be located after removing checkmarks from hide system files, rom and hidden files in the windows directory.
This is supposed to take the place of Hitchhiker and Wififofum.
Can someone please provide it from their device?
Network Analyzer for WM5
Ok, nobody can help. That's ok. It's a learning process.
But I do want to help others, that's what this site is all about.
So here's the deal. Just read on msmobiles.com about the Network Analyzer for WM5. It will take the place of wlan utility that I wanted and do a little more. Here's the link: http://msmobiles.com/news.php/5561.html
Check it out, it does work and it's straight from Microsoft. Only bad thing about it is it has to run from the device, cant run from SD card. Oh, well neither did the wlan_utility.exe. Give it a whirl.
Hey man, thx for the reply, was of great use to me!
Double-post... sry!
Related
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
crus said:
When I put in my SD Wifi card into it, it doesn't seem to work. I know that my SD WiFi card is working as it works when I use it on a XDA II.
I went to check the Network Card on the Mini, it does not have the SDIO WLAN adapter in it. Is this normal? Does it mean that I have to install the adapter myself? Where can I find the adapter for XDA II Mini????
Thanks for your help as I am really new to this.
Crus
Click to expand...
Click to collapse
Install this...
copy to device through ActiveSync explorer.
Goto device's File Explorer, look for the CAB file that you just copied.
Tap on the file to install.
Sandisk Driver
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com, have tried both the Wifi, and the combo wifi card, the wifi works well. The combo also works okay, although does have some lock ups, but IT DOES WORK!!!
I have been tyring to export ROM without doing any harm to device as only have it on load for a few more days, as want to bring the SDIO driver accross to my XDA2.
Have noticed the BT is having problems also, and would envisage an update is coming for this to bring up to new version that is on XDA IIs.
henrylim:
Install this...
Click to expand...
Click to collapse
Thanks.
I shall try it when I get off work tonight.
Thanks again.
But one more question, does anyone know if the WLAN adapter should come with the XDA Mini?
You have to install the driver first .
After that no problemos
it work fine ( WifiFofum work very good !!!)
Re: Sandisk Driver
lampard said:
I have an XDA Mini, downloaded and installed the latest driver from www.sandisk.com
Click to expand...
Click to collapse
Hi,
the latest driver from sandisk that you have mentioned, is it this?
http://www.sandisk.com/download/Drivers/wifi/256mb-setup03.exe
or something better?
I'd tried this before in WM2003SE 2.06. No dice. If it works in Magician, I'm inclined to hope that the SDBus drivers has been updated, and (cross my fingers) that SDIO H/W slot is the same.
hmm....something more to be cheerful about during Christmas...
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Different version of SDIO drivers
lampard said:
Yep, have a tried a few different versions, and all have worked okay. I had to give back the Mini before I could find the SDBus drivers, as had a similar idea for the XDA2.
Thanksfully still have a XDA2s to play with for a while.
Click to expand...
Click to collapse
I wonder why I didn't look at this before.
The Mini and JAM has the same version of SD drivers:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"SDMemory"="0.25.00"
"Common"="0.25.60"
"SDBusDriver"="BSQ 1.2 + 0.25.00"
Whereas the 2.02/2.06 has these version:
[HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\SDIO]
"Common"="0.15.10 HIMA"
"SDBusDriver"="0.15.00 HIMA"
Anyone can confirm the 2.20tl version?
The drivers are in the ROM though, and it's not a simple search and replace operation.
I wonder, would it be worth to upgrade the Himalaya with Magician ROM???
I'd quite a few pple now that says that the 256MB SD drivers for PPC 2003 works with the Mini now. I've tweaked the registries for the Himalaya, but only get as far to allow the wlan tools to recognise the card..still no joy.
Guess what...sd wifi of (256 combo) working....
I've managed to get the Wifi portion of the Sandisk Wifi 256 working
on my 206 ROMed XDA2 device.
The steps are abit complicated, so try at you own risks!
The steps are:
(a) download the sandisk 256 drivers from www.sandisk.com (256mb-setup03.exe)
(b) remove your XDA2 device from the cradle, and execute the file.
(c) Goto to the Microsoft ActiveSync folder, and look for this folder "SanDisk Corp\Wi-Fi_WINCE400"
(d) Within this folder, there is a Pegas.2577.CAB
(e) Using WinCAB Manager, open this CAB file
(f) Within the Pegas.2577.CAB file, there is another "SDBusDriver12.CAB" at file index 5.
(g) Now, download the Magician ROM (the SD card version) from the forum's ftpsite.
(h) Using dumprom, dump the contents of the Magician ROM and locate 2 files "SDBusDriver.dll" and "SDMemory.dll"
(i) Replace these 2 new files with the ones in the "SDBusDriver12.CAB"
(j) Re-save the "SDBusDriver12.CAB" and replace the file in "Pegas.2577.CAB"
(k) save "Pegas.2577.CAB" and connect the XDA2 device back to the cradle.
(l) install the Sandisk drivers following the prompts.
(m) Soft reset the XDA2 device when done.
Insert the 256MB+Wifi SD card, and activate the Wifi !!!
You might find that I've gone the long way as I have yet to figure out the full implications of the setup. It doesn't replace the original DLL files in /Windows as the 2 files are installed as CUSTOM SD drivers.
Perhaps we can pool our brains together and crack the SDMemory portion.
I am surfing on my XDA2 device using the Wifi as I am writing this, so I believe we are close to the verge of cracking this.
hello,
I recieved my s100 with the sd wifi/storage card and trying to setup a wifi connection.
I installed the sd drivers and i scanned for an wifi accespoint i noticed that my neigboars are having a wifi acces point.
but i get this message:
unable to obtain a server assigned IP adress.
what i'm a doing wrong?
I can't get wifi to work!
hello,
I just can't get the thing working
I tryed the following:
I installed the driver from scandisk that was on my cd ( the same as mentioned here) everything goes well but i looks like he doens't install the pegas stuff.
I do get a wifi connection link ( settings ->connections -> sandisk wifi
I alsow tryed the tutorial of henrylim but i get stuck at point c becaus there are no files in my activesync folder.
I did try to find wifi networks and i did find a netwerk from my neighboars, i saw there connection if it was securred and mac address an everything.
I didn't get a IP address
@ the AP Browser part i saw it and the connection was 33% there.
But when i go to the status it doens't show anything but that the device is Associating and then the network name.
if i than try to use the internet it wants to use gprs and not the wifi card.
can anybody plz help me I would really like to use the wifi on my magican.
Do you have a DLINK AP ?
If so, ithey do not get along very well
brilca said:
Do you have a DLINK AP ?
If so, ithey do not get along very well
Click to expand...
Click to collapse
i don't really know what you mean.
i was talking about the standard sandisk software and there is a tab called "AP Browser"
what is the brand of the access point wi-fi that you have ?
brilca said:
what is the brand of the access point wi-fi that you have ?
Click to expand...
Click to collapse
bussy deciding whitch one to buy, I'm now trying to access the neigboars netwerk.
Unless your neighbour has specifically allowed you access to his network you will probably not be allowed to connect.
And as long as you're trying with your neighbours access point, brilcas question about the make of the access point would apply to the one they have.
OK I had a wifi connection.
my brother turned his laptop into an AP and i had a connection with it.
So I know the wifi on the imate works but there's still one problem.
When i was connected with wifi and i tryed IE explorer it wanted to connected by using wifi.
How can i change that into wifi?
eltinio,
I am still trying to get WiFi to work on the WM2003SE UK XDAII version...
In response to your question, you need to tap Start > Settings > Connections and then tap Connections (make sure your WiFi card is in and enabled).
Tap the Advanced Tab and then tap the Select Networks button, from the first drop down list select My Work Network and then tap Edit.. > Proxy Settings tab and then tap the 'This Network connects to the Internet' checkbox and then tap OK to save and OK again to exit the connection manager.
You will no be able to browse the internet...
henrylim,
Could you post a link to the WiFi drivers you cooked or provide the file in this thread please so we can all test it out as most people may not able to perform the tasks you have listed to enable the WiFi drivers.
Thanks in advance,
Godz
XDA Mini and SD Wi-Fi
Do you guys know if the SD Wi-Fi card Sandisk or Sockets supports WPA encryption when added to the Mini and also if the problems with Dlink 54G/B wireless access points have been fixed yet?
When I ActiveSync, I notice my laptop shows that it is trying to make a network connection...then stops trying. A minute later, my K-Jam says it was unable to make a network connection. The strange part is that I haven't setup anything to make a network connection. Any thoughts?
Thanks,
Tom
Upgrade to 4.1
I read somewhere that the Wizard does not sync properly witch any ActiveSync versions before 4.1 (which is not officially out yet).
Check here for info and download: http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=375
activesync 4.x does use ip addresses, if you check this link and then the link in it, you will get some answeres & hopefully all your problems will be solved.
http://forum.xda-developers.com/viewtopic.php?t=32022
I'll check out the link....thanks!!! I have 4.1 installed since I got my K-Jam. I rarely ever used it with my PDA2K, but I have to install programs...damn those exe's...why can't everyone just use CAB files.
Thanks,
Tom
situation that can arise with cab files is they self destruct/delete after the install is completed,
unless you change the attributes to read only
aliendad said:
situation that can arise with cab files is they self destruct/delete after the install is completed,
unless you change the attributes to read only
Click to expand...
Click to collapse
Not if you use CabInstall
I'm got yesterday Wireles LAN Card SDIO 802.11b.Problem is that i can't connect my Qtek 2020 with this card.Can somebody help me about this problem?Thanx
Have you installed the drivers on your device? The card should have come with a CD, if not go to the manufacturers site.
Can you detect any networks?
Please describe the problem more precisely, and maybe someone can guide you better then this.
I'm totaly new in this.I tryed to folow instructions in manua.I instailed all drivers that i have recived,but still i can not find network and i have one wireless in my house.My main problem is that i don't know how i can make set up in my Qtek 2020.Thankx for any sugestion
Ok, I never actually used a separate SD card, but I just finished setting up my home network last week so I'll try to give you some pointers until someone more knowledgeable comes along.
1) If everything was installed correctly, you should get a new icon, in settings or programs (depends on the card I think) for the Wireless utility.
There should be an option to turn it on and off, so make sure its on.
2) If you are not sure how your network is configured, or just don't want the hassle of manually setting up the device, download Hitchhiker.
http://www.kasuei.com/hitchhiker/ its a free app that will automatically configure WiFi and connect you to the network. You will need .NET CF2 installed for it to work.
Also you can see any networks that were detected in Start->Settings->Connections->Network cards. You can choose there which one to connect to or manually configure the settings.
Thank you mr.Levenum!!!!
I will download tomorow this progam and i will try to connect SD card with Qtek again.I hope that will working well.Thank you too much for your help. Best regards
Hi!
I followed all instructions,and i instaled drivers and utiluty from instal cd.Problem is that my Qtek can't find any avalible wireles network and i have one in at home.I put all correct parameters for this network,but still nothing.I also tryed with program"Hitchhicker",but problem is the same,hi can't find any network.Have you any sugestion what more i can try.Thank you
Try checking the settings on you router.
Is it set to broadcast SSID?
What standard is the WLAN card B / G ? And what standards does the router support?
Also it is possible that your router is set to a channel the WLAN card does not support (my router supports up to channel 14, but my Jamin only up to 11)
Try using a different channel.
Hi all,..
I would like to know if it is possible to use the WM6 internet sharing on a official T-Mobile NL WM5 ROM.
Is there a (working) CAB file or something?
Regards
A.
Just copy the files to the Windows folder and create a shortcut under Start Menu>Programs>whatever folder you want.
Try this. Let us know if it works.
---
Well,..
same error. I've recently tried the CAB file from an earlier post (maybe the same one as this one),...and get the error:
INTShRUI.exe is not a Valid PocketPC application.
please advice...
regards
A.
Cheers, been looking for this
Thanks for that, have been looking for this app. for awhile now.
Softbank X01HT (Hermes) ROM contains those files, but reports "IntShrUI.exe is not a valid Pocket PC Application" when executed. The files on the X01HT ROM were: IntShrUI.exe 184 bytes, intshare.dll 208bytes.
The files posted above execute properly and detect my net connections. Now I just need to find out what to do about this message: "Cannot connect for an unknown reason. To change your connections settings tap Settings."
Will post if I find the answer.
INTShRUI.exe is not a Valid PocketPC application.
not work on my Eten M600+
but thanks anyway
Works great for me on my WM5 XDA Flame, by cable and BT !
Thank you very much !
Im gonna try it on my Treo 700wx and tell !
Hope it works!!
Have you voted guys?
Nope. Not working. Donno how to make it work.
Not workin for me too..
Hi everybody! I've searched for a problem like mine here but I didn't find it, so I'm openning a new thread. I hope it's ok to do that!
I'm having some trouble trying to connect to the wifi network at the hospital I work. I tried to follow the intructions they gave, but these instructions are for desktop computers and notebooks and they have steps that I don't know how to follow in my blackstone. The instructions are the following (for windows XP):
-add a new network with the name: wifiuel
-choose WPA2 autentication
-choose AES cryptography
-choose PEAP access, go to properties and uncheck all options. Also, at autentication method EAP-MSCHAPv2, click on configure and uncheck the option to use the logon's name and password automaticly.
There are a few more steps, but from this last one I can´t go on. When I tap on the properties buton on my blackstone, I get the following warning: "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
In case you just didn't understand the steps because of my poor english, here´s a link to them, but this link is for the windows vista configuration (I chose it because it is mainly in english and it has many screenshots, so I think all of you can understand it): http://www.uel.br/ati/suporte/pages/configuracao-wifi-uel/windows-vista-us.php
Any ideas of how I can solve this problem?
I'm runnig Dutty's Leo Holy Grail R0 rom, with WM6.5 and I can log on just fine in other networks.
Thanks in advance!!!
Hi,
just trying to help u.
in your case, maybe you need some sort of certificate like you stated above. Go ask your IT service/help desk on where you can get one.
Or maybe you need to register your device (WLAN Mac address or you need to use fix IP). For this, you also need to ask help from your IT service to register your device to their list, so that u can connect to their wifi network.
Not much help, but u can try them
Oh, thanks, I was going to do that anyway, but I though someone here could help me or indicate some wifi utility that could handle those steps to configure my network.
Well, thanks for your attention!
Moved as not software release...
Hey, I've got some news
I have some new facts to tell you guys and see if you can help me. First, I discovered that when I just ignore the warning that I get when I click on properties, I get another message saying that the server certificate is issued by an unknown autority and it couldn't be validated. Then I finally talked to the support staff at the hospital and they said that they don't use any certificates at all. No personal nor server certificates are needed. So I guess that the problem is with Windows Mobile, which is asking for certificates when they're not needed.
Is there any way to command WM to not ask for a certificate when logging on a particular network, because I believe this could be the solution for my problem!
Thanks in advance!!!