When I have the provided ear-phones plugged in, the ringer comes on through both the main speakers and ear-phones....but the sms alert tone only comes on through the ear-phones! How to fix this?
Also, since I ran the rom upgrade, the battery seems to be drained much faster...any ideas? Please advise, thanks!
Related
I just finished installing the new SX-56 WM03 ROM on my O2 XDA I unit. Having tried the new ROM for hours, I find it quite satisfactory and stable compared to its predecessors but there seems to be one set back though, the volume!!! It's quite noticeable that the volume had been tweaked down to about 30%, and they just made it more impossible for XDA users to hear whether there's an incoming call or message. Is there a way around this? I really hate to switch back to my old ROM just because of this!!!
Expert Advice Needed!!!
Your help will be greatly appreciated...
I have same problem... I think it's bug. If I set the system volume high, then the phone ring silent, if I set the system volume low, then the phone ring loud...
If you set the phone to 80%, means to klick under max. Than you can use 100% phone ring and volume.
Yup, that's exactly the case! you set the volume at 80% and it gives a louder voulme than having it set on 100%. I guess there is someone here who knows how to get around this problem...
So does anyone really have a clear solution to this problem? like a program I guess?
ohenry774 said:
So does anyone really have a clear solution to this problem? like a program I guess?
Click to expand...
Click to collapse
The solution: switch to ROM T-Mobile 2003 v4.01.16 ENG, and it's look like working fine without AT&T sound level bug.
I downloaded directly from T-Mobile, but I think You can find it at ftp://xda-developers.com
hey
do you this problem? when the sound is all the way down, each time you shouldn't hear a sound, you hear a little "tick" (like when you press the "START"..)
what can i do?
I have the similiar problem as well. Please update to the new ROM in www.seeo2.com and this problem should be solved
Upgrading to new ROM will not solve this problem. The only way I found to dispose of those ticks is to turn off Equalizer. Hope this will help.
thanks!
although i am using the equalizer, i prefer to turn it off...
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
... can be fixed by changing headset volume limiter.
Please tell me how to fix this problem
I got the same problem with my Atom Life. How can I fix this bluetooth problem.
chauchau said:
I got the same problem with my Atom Life. How can I fix this bluetooth problem.
Click to expand...
Click to collapse
Hi, i do not have any problem with the hissing sound. In fact, this have now gone! I now have uninterrupted, clear sounds coming from my stereo bluetooth device.
Does your bluetooth device allow you to enjoy the SRS sound quality?
When i switch on the camera, there is a clicking sound. i swap to a new phone but the system persists. does anybody have the same problem?
coolface said:
When i switch on the camera, there is a clicking sound. i swap to a new phone but the system persists. does anybody have the same problem?
Click to expand...
Click to collapse
Does anybody have this problem? sorta like a clicking sound when the camera is turned on.
I guess it's the macro-focus?
actually i went to O2 and they say its normal and all Atom Life has the same problem. Try placing the phone next to your ear while the camera is switched on, you should all hear a soft clicking sound.
No clicking sound on my side. I have another fu..ing issue. The camera opens in macro mode (also with the indicator OFF position) and remains always unfocused. Take a normal picture it's not possible!
I e-mailed O2 and they said me to hard reset the device (what a customer support )
It made me hungry but i cannot stop laughing buuaaahahahaha
Anybody had the same issue?
Any solutions?
Hi!
I have a problem. Recently I 've installed new rom (touch-it 4.0)on my xperia. Everything was fine but when I plugged my phone to hi-fi, I started having problems.After i unplugged the phone the headphone icon was still on the display bar. I've tried to switch off the phone or even remove the battery but the problem still exist.I am not able to even make a call, without my headset, cause phone still acting like sth was plugged to the mini jack.
Please, do anybody know a solution to this case???
best regards,
Karol
Same...
I've got the same problem. I didn't install any Mod Roms, but Ive heard it could be a hardware problem. All the suggetions didn't work... like unplugg it when you just started a call...
My main problem is that it doesn't play any sounds anymore... Coreplayer says: "Wave Output: Device error!"
Maybe its because i've installed WOW-HD Sound app...
Shouldn't have done so... I guess..
But the headset problem still exists besides the sound prob, cause ive read a lot of stories about exactly this bug...
It's the same at my phone: The headset symbol doesn't disappear when you unplug your headset...
I think i got the worst case: My sound doesnt work so i even cant make calls with the headset... means, left for me is sms and Internet...
Thats why I bought a mobile phone
having thesame icon on my phone too cant hear nothing when receiving a call not ontill i slip in my headphone but my ringer works good thats the reason its amazing that i can hear my ring tone when am been called but cant hear nothing when accepting a call ,till i slip i my head phone,anyone got a solution? try let us know, thanks in advance