WiFi Problem - 8125, K-JAM, P4300, MDA Vario General

There's a problem with my WiFi connection. Everytime I try to access a site with wifi, it continues to say loading until the edge connection disconnects. after the edge connection goes off, wifi then goes thru. its really annoying. this is the first time it happened. it use to use both edge and wifi simultaneously. Does anyone know a solution to this? I hate waiting almost a minute just to load a page with wifi. thanks for any help with this.

ok, I searched thru the forum but didn't find a solution to this. does anyone here know why my edge and wifi doesn't work at the same time like it used to? Its really annoying that I have to wait for a page to load on wifi just so the edge connection disconnects. so now, every time I want to use wifi I have to turn off the phone in the comm manager in order for PIE to load pages faster. please help.

Related

keeping edge connection alive

anyone know a plug-in that can do this? i get tired of having to reconnect every time i want to reload my weather page or open my browser. any help is appreciated. thanks.
it automatically disconnects when you screen lock your herald/atlas via hardware button, right?
The obvious solution would be not to have your herald/atlas screen lock.
Of course this uses a bunch of power. That said, maintaining and edge connection also uses alot of power.
EDGEalways -- try it
http://www.getjar.com/products/14447/EDGEalways
Try it. Works for me, let me know if you have any problems @ the email address listed there.
Mine never lost it's connection, probably had to do with being on exchange server though.
i thought it is the same like gprs allways one? and if there is edge connectivity it will be automaticla edge allways on. there is a regkey - you can search by totalcommander - just type gprs.....
you will get a list of regestry with gprs - one is gprsallways on.... as i remember right..

Problem in opening web pages

Hi all,
I have been using gprs on my touch since I bought it around 5 months ago.
Lately I am getting an error of Web Page not found using Internet Explorer.
Only if I restart the phone or re-run the gprs settings it connects properly. Sometimes it doesn't connect after doing the above steps also, so I have to just refrain from using it for a couple of hours.
I do not keep the gprs conn On continuously. I judiciously turn it off after my browsing is over.
Can anyone help me with this?
hi, try and use skyfire is freeware and better web browser
You might want to get in touch with your carrier and have them set up your gprs connection again. Perhaps something on their end is causing it.
Alternatively, as a suggestion....use opera....its a lot more stable. Check to see if your connection behaves the same way there too.

3G getting used rather than WiFi

Hi. Have a recent problem that developed on my HD2. It happened after installing the mod that activates a task switcher when holding the send button. Could have happened sooner but I think I would've noticed...
Problem is: I have my HD2 connected to WiFi at home and it works perfect for web browsing and all, but, the moment I use other apps such as updating weather or browsing google maps or the Windows marketplace they use the 3G regardless of my WiFi being active and working.
I am on 1.48 stock ROM.
I have uninstalled the mod BTW and I use duttys task manager.
Please please help me someone...
doubt it has anything to do with that mod... i dont have any mods on and 50% of the time even tho i am in WiFi covered area with WiFi on it will start using 3G instead of checking for WiFi. Its extremely annoying and i cant understand that HTC didnt atleast give you a small manager wich would give you different options how to connect to internet once you are trying to connect...
Its not that I am in a WiFi zone. my WiFi is connected and I am browsing the web. It's.not that it is just choosing a connection, it completely ignores my WiFi on everything but the browser. And it only started happening today. Marketplace worked on WiFi yesterday.
Nevermind. I found the problem. Earlier today I set no WiFi network to be treated as a work network instead of a internet network. this lead to most apps thinking I am not connected to the internet.
TicKByT said:
Nevermind. I found the problem. Earlier today I set no WiFi network to be treated as a work network instead of a internet network. this lead to most apps thinking I am not connected to the internet.
Click to expand...
Click to collapse
Hi. My problem is more or less as described by NESO1234 above. WiFi at home is is connected, but browsing Internet is done through 3G (I guess - loading a page takes loong and the arrows indicating WiFi connection are not moving).
You mention network not set correct. Could you or someone give me a more spesific hunch (path...) on how to make WiFi beeing used?
jsw44 said:
Hi. My problem is more or less as described by NESO1234 above. WiFi at home is is connected, but browsing Internet is done through 3G (I guess - loading a page takes loong and the arrows indicating WiFi connection are not moving).
You mention network not set correct. Could you or someone give me a more spesific hunch (path...) on how to make WiFi beeing used?
Click to expand...
Click to collapse
Go to the WiFi connection place (where the Wifi switch is and it shows ur acess point underneath) go to Advanced > Change Network then select ur AP and make sure 'Connects to:' is set to 'The Internet'.
Hope it helps, it worked for me

Automatic wifi

Hey all,
Done some searching but cant find a clear and striaght forward answer.
Bascially, on my old HTC Dream (Android) wifi would always be searching for a wifi to connect to (and if it found a network, it would tell me). if it was a network it had acess to, then it would automatically connect.
Otherwise, it would just use my contract internet.
So I was wondering, on the HD2, you always have to manually turn wifi on. Then say I leave the house, manually turn it off for it to connect to the contract internet.
Pretty small thing - but it gets annoying after a while.
Is there a way (reg edit or app) to make wifi do the same as the android did?
Thanks!
Bump.
I am interested in this too. I am trying to assemble a Mortscript to do it.
would be so helpfull.
I have my home network, Uni network and girlfriends that I can connect to. Now having to manually connect each time, and then disconnect from wifi when I leave is pretty annoying
Oo Alias oO said:
Hey all,
Done some searching but cant find a clear and striaght forward answer.
Bascially, on my old HTC Dream (Android) wifi would always be searching for a wifi to connect to (and if it found a network, it would tell me). if it was a network it had acess to, then it would automatically connect.
Otherwise, it would just use my contract internet.
So I was wondering, on the HD2, you always have to manually turn wifi on. Then say I leave the house, manually turn it off for it to connect to the contract internet.
Pretty small thing - but it gets annoying after a while.
Is there a way (reg edit or app) to make wifi do the same as the android did?
Thanks!
Click to expand...
Click to collapse
This must be a rom issue. What ROM are you using?
My HD2 Wifi will connect automatically to networks I have connected it to before, it will notifiy me of available wifi, it will use cell data when wifi is not connected. Works to me the same as how you described your HTC Dream.
Just the stock one that comes with the phone.
to make my point slightly clearer...
I am at home with my Wifi turned on and connected.
I leave my house and go outside of the wifi range.
My phone still has the wifi icon at the top, but it wont be connected.
Therefore I have to turn wifi off to let it connect to my contract internet.
Maybe Wefi will solve that problem?
On Symbian worked very well.
Mike
sdhfjmhsdhfghj
I shall look into this, cant belive others dont get annoyed at it tbh
I'd like a solution to this too. I have found it annoying since settings my HD2. I haven't had any success with the solutions suggested in the forum to date.
actually guys.. there is another thing.. how about a cab that would force HD2 to open WIFI automtically to update weather/facebook..etc... whenever the any apps needs updating, then shutting the WIFI automatically off instead of trying to connect to 3g. you guys think its possible?
Mine always lets me know when I can connect to wifi.
Guys theirs does too. You dont get what they want.
When wifi is turned on it will search and connect only to wifi. It will not connect to wireless network of provider. So they want a program that would turn wifi off (which would let HD2 to connect to EDGE and 3G) if there was no place to connect to. And it would turn wifi connection back on (dissable 3G and EDGE) when there would be a wifi network to connect into. You get it now? It would neeed quite sophisticated program to switch betwen those two modes.
I dont use Providers network (3G, EDGE) but would like program that would check for avaible WIFI networks that I have access to and Connect to them to get updates (it would check for example every 10min) and connect to it only to get updates and SYNCH. then disconect and wait cca 4hours to start looking for wifis in 10min intervals. Would be nice =)
KowboyBebop said:
Guys theirs does too. You dont get what they want.
When wifi is turned on it will search and connect only to wifi. It will not connect to wireless network of provider.
Click to expand...
Click to collapse
Then it must depend on the ROM version, but for me it works exactly how he wants, and always has. I never turn Wifi off. If I'm at home within my wifi range and load a webpage, it loads it through wifi. If I walk away, wifi connection gets lost, and I press a link, it will load it with the data connection straight away. If I walk back home or to another place where a known wifi is present, wifi reconnects by itself.

Cyanogenmod: WiFi and 3G

Hi guys,
after having installed CyanogenMod 7 v. 2.6 I have got problems with WiFi and 3G connection. Sometimes it seems my phone disconnects with the internet. Actually, the widget shows that connections are enabled but the market or browser won´t load anymore and I get the message that I need to check the connection :S
In this case, the only thing that helps is to switch to flightmode for some seconds. Sometimes even this does not solve the problem and I have to restart my phone.
Hope, you guys can help me. Thanks.
I noticed another problem, that might have a relation to the first one i have described.
Sometimes when I like to connect my phone to the internet via 3G or WiFi (using the integrated widget) it does not connect at all. The status bar does not show the WiFi or 3G sign and browsing is not possible.
Damn guys I need your help

Categories

Resources