Can someone please help me.
A few days ago, I was unable to send and receive mms messages because my settings were incorrect.
How can I have this phone set so that MMS works correctly, but my WIFI and programs like Agile will connect to the internet using gprs?
I'm on cingular 8125
ok, i kinda figured out whats goin on...
it's not connecting to the gprs when i launch the program... if i happen to send a photo and the phone is connected gprs, then agile will connect.
is there a way to make agile just connect to gprs when you launch the program?
I find that opening IE then letting it auto connect to GPRS then opening agile is the best method. Its what I do. But if there is a command to make a program auto connect to web id like to know it.
Under Settings->Connecitions->Connections->Advanced->Select Networks
What options do you have chosen?
the way i fixed the problem is by using the registry wizard and turning gprs always on... so far it's working good.
if for some reason it doesn't connect, i do the trick listed before and connect to the internet, then agile.
gtdRR said:
Under Settings->Connecitions->Connections->Advanced->Select Networks
What options do you have chosen?
Click to expand...
Click to collapse
Again, what options do you have chosen?
Related
Any tips? I'm sure I have everything set up perfectly, but it just won't download any web pages. Is there something i'm missing?
I can download my e-mails fine (Hotmail, and IMAP) but can't get any web pages open using eather IE or Opera.
Cheers
Try disabling proxy on your GPRS/EDGE connection first (take note of the settigns first). I haven't been able to do anything using Activesync Passthru.
It was allready disabled.
I've just done a hard reset, and it still won't connect with a fresh Activesync connection. Any ideas?
ACTIVE SYNC AND INTERNET
Under options in ACTIVE SYNC---you have to have THIS COMPUTER CONNECTS TO INTERNET .
Thanks, but it's allready ticked.
Anything else?
hi!
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
ACTIVE SYNC AND INTERNET
I've also had problems if my OUTLOOK inbox is set to my POP MAIL ACCOUNT (YAHOO). When I check outlook mail for some reason it connects.
Also--what are your connection settings to get to INTERNET for your GPRS and WORK settings unrelated to active sync?
Re: hi!
guitarman_08 said:
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
Click to expand...
Click to collapse
I don't get what you mean. What will this do?
Cheers!
hi
Well, matheprat im just guessing if this is right... but i have encounter this problem wherein i can't load any web page on my ppc..theres an option on tweaks2k2 where you can chage PPC IE as IE 6.0 Well It will not totally chage but it will make your browser pass like an IE 6.0.. just try and let me know if you've done it
Thanks for the reply. I tried doing the above, and there's no change, I still can't connect. Every time I connect the PPC to Activesync I get a message saying that it's unable to find a server assigned IP. Ive tried using a specific IP (my computers), and leaving it to obtain one from the server, but neither work. When it was connecting before, i set it to obtain an IP from the server.
I also can't update the weather info for SPB Pocket Weather, but I can check e-mails (hotmail and IMAP), and sign into MSN on the device.
k!!
k!!
Hi,
I have recently picked up an Orange SPV M3100. I installed skype 2.2 on it and tried to run it. The login screen comes fine, but when I click on "Sign in", it gives me a pop up saying "Skype needs an internet connection to function. Do you want Skype to connect to the internet through a cellular connection?"
When I click YES, I get "Unable to connect to the internet. Please check your network settings."
My internet through IE works fine on GPRS. It is good speed and works excellent. I am able to use MSN Live as well, but Skype doesn't seem to be working.
I've been through posts - where there have been suggestions to check the proxy settings. But there are no proxy settings in the mobile.
Anyone who can help me out here?? Most posts discussed how easy it is to connect to Skype using GPRS and how easy this works. I have been trying for quiet some time to no avail.
Alternatively, can someone give me an older version of this Skype for PPC, which might work for me??
Regards,
Saurabh Dubey
I think you should view this thread...
http://forum.xda-developers.com/showthread.php?t=311938
Nothing works
Hi,
Thanks for the quick response. I have been through the thread. But the thread says that this can still be used for chat. I can't even log on. Any help here??
Regards,
Saurabh
Same here. I have the Cingular 8528 and have the same problem.
Please use the other thread referred to above.
Mike
Hi guys i have an O2 exec with a WM5 ...but the pocket MSN isn't working..I downloaded Fring and still not working..I also downloaded the Windows live 10.6 of WM6.1 and sitll it didn't work..it alwys tell me make sure there is a connection..i think there is something wrong with the connections..although when Im connected by wi-fi i can surf the web with internet explorer..so if anyone could help me I'll be greatful..thanks
Go through: Start/Settings/Connections/Connections/Advanced/Select Networks and set the first drop down box as My Work Network and be sure your wifi connection is set as Work and not The internet.
still...
I don't have a "my work network" settings...what should I do ??...and that's because i use wap also..what should i do ...will downloading a new ROm be the Answer??
mmm... if you're using wap/gprs, try setting the above description from Scotchy fo MY ISP... that should be your user defined wap connection.... maybe this will help, maybe not, I don't have your OS.
Please help
I am having problem receiving emails via WiFi, it's automatically trying to download email using EDGE/3G, which is ok, but I would like to save my traffic when I am connected to my home/office WiFi router. Any ideas how can I control which connection to use at a time?
BTW
(I am using WM6.5 Official Rom/TD2 and my wifi connection is working fine, I can browse pages using TD2's Opera)
grishazzz said:
Please help
I am having problem receiving emails via WiFi, it's automatically trying to download email using EDGE/3G, which is ok, but I would like to save my traffic when I am connected to my home/office WiFi router. Any ideas how can I control which connection to use at a time?
(I am using WM6.5 Official Rom/TD2)
Click to expand...
Click to collapse
The settings can be found in Settings\Connections\Connections, but not sure what program you can use to schedule connections.
You can also set Gmail as your exchange server if you still can't connect through WiFi.
Bruce Inman said:
The settings can be found in Settings\Connections\Connections, but not sure what program you can use to schedule connections.
You can also set Gmail as your exchange server if you still can't connect through WiFi.
Click to expand...
Click to collapse
thanks... I got it!!! It's working, I changed the network settings to work and thats it!
Hi I recently signed up for a StrongVPN 3 Country deal to give me a stable VPN connection in China. I have set up all ok om my home PC and it works fine allowing access to sites otherwise blocked here.
Then i set up a VPN connection on my HTC Touch Diamond2 I can get the VPN to connect using either IPSec/L2TP or PPTP methods, however neither Tunnel seems to allow Internet access to either MS Explorer or Opera Mobile 10 or any other internet program.
In fact when i have established the VPN connection and then start my internet explorer or any other program which needs to access the internet then the VPN connection is dropped.
If I connect the VPN tunnel on the TD2 i can site there watching it for ages so it does not seem to be dropped after any specific time frame, only when I start an internet access program. for instance if i open my Hotmail account then the VPN connection stays until the point when i tap send and receive then it drops immediately and the hotmail account then synchronise mail via the standard wifi connection.
I also set-up my home PC to allow incoming connection and then set up another VPN connection on my TD2 to allow it to connect to my home PC. but whilst i can connect to my home PC i can not surf the internet using the VPN tunnel......I had thought that i might be able to start the StrongVPN connection on my homePC and then access it via the VPN connection from my TD2 to my HomePC but it does not seem to work that way.
My objective is to use my mobile phone to be able to surf social networking sites that are otherwise blocked by censorship.
Sorry for the long post but please could anyone with advise or experience at setting these two functions up on WM 6.5.3 please advise.
Well I think I may have found out the reason for the VPN connection to drop out....I needed to change my setting in CONNECTIONS and where before i selected my GPRS or EDGE service provider i now need to change that to "My Work Network" as this is where i set up the StrongVPN connection. now i have done this change to the settings the VPN connection does not drop out when any Internet program is started.
But I still can not access the blocked websites using StrongVPN on my WM device so I do not really know if it is using the VPN connection or not.....
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
ahmadnawaz said:
im also in china and got one vpn for the same reasons as u and having exactly the same problem as u..
plz tell me if u found any solution...
Click to expand...
Click to collapse
StrongVPN Help desk advised me to input their DNS server settings in to the VPN account settings. I will try this when i get back to China in September. the DNS settings are found by edit the VPN account then next, next and select "Advanced" then scroll to "Servers" there you can select manaual server address and use the one that you VPN service provider recommend.
Let me know how you get on.
I have a similar problem here. I have setup the VPN in network connections but am still unable to surf blocked sites. The VPN worked fine on my PC. I have also changed the DNS setting for the VPN but no luck. But since there was no popup windows telling me whether it is connected or disconnected, how do I know the status of the VPN connection? Thanks!
to see if you are connected just tap on the top info bar then u should see your wifi connect and also your VPN connection. if you enable sound notification for connections in sounds then you will also get an audible connect and dissconnect to let u know. remember to set all your connection settings to "work connections" as i fount if not then when u open opera or other program that needs internet connection it will disconnect the VPN connection.
Thanks. I have tried that and the VPN was online. But opera was just couldn't open any page. Eighter the factbook tab in TouchFlo3D couldn't login. Any idea?
Have the same problem connecting to my home network - Remote Desktop works fine, until I open a browser on my HD2 - changing settings mentioned above didn't help...
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
scv said:
Ok - it seems like I've managed to discontinue the connection drops to VPN.
Added wildcards to exceptions http://*.* and https://*.*
This way everything that tries to connect to internet connects via VPN. To stop that - in Work network setting select the same connection you use to connect to internet (Connections > Advanced > Select network)
Click to expand...
Click to collapse
I'm not sure what you mean by "added wild cards to exceptions"....what exceptions and where on your PDA did you add them?
As far as I was aware you are only able to set up a VPN connection in the "My Work Network" connections area. then to stop your VPN connection from being dropped by any application that access the Internet, you simply change your options to BOTH use "My Work Network" then the VPN connection is used for all applications.
However that said, I still cant access blocked sites using my VPN connection with StrongVPN in China. even after setting my Server DNS to that of StrongVPN it still does not work.
Anyone got any ideas why or how to access blocked content in China on their PDA??????
VPN 10 Reply
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
WiFi BUT NO EvDo FOR VPN Reply
Quick update - I now have this working at 100% through WiFi, where I don't need it.
Any updates?
- 2 Bunny
HINT INQUIRY Reply
Any updates on this one?
- 2 Bunny
CURIOSITY Reply
Any new thoughts on this?
- 2 Bunny
APRIL Reply
Any updates on this?
- 2 Bunny
DIAMOND IN NEED Reply
Any updates on this?
- 2 Bunny
kainppc6700 said:
Sorry, I don't have a solution for you, but I do have the same problem.
SOMEBODY PLEASE!!!! I NEED EVDO INTERNET!!!
LOL!
- 2 Bunny
Click to expand...
Click to collapse
same here
taker2
SOMEONE ELSE HAS THE SAME PROBLEM Reply
taker2 said:
same here
taker2
Click to expand...
Click to collapse
Great. Let me know if you get any updates. I'm still stumped on this one. What ROM are you using in your Diamond?
- 2 Bunny