Hello,
i have a problem with my T-Mobile MDA-Pro.
I received from T-Mobile a new MDA Pro in the last days, then my first MDA Pro Camera doesn't work (It shows a black screen).
Now i have flashed the ROM to Qtek-ROM, but i don't see the Bootloader Screen.
It where a Blank Screen, but the Bootloader work. I have installed the Qtek-ROM without any Problems.
And now, when i turned on the MDA Pro, the Display shows always a white Screen (the Lamps are on) several 2 to 15seconds, but it works.
The Qtek-ROM works without any Problems out of the white screen on the first 2 to 15 seconds after turn on.
Is this a Hardware-Problem or Software-Problem???
How can i see the Bootloader-Version???
Please help me.
Bye
Marcus
Related
ive upgraded my hermes with official O2 hermes rom a month ago. 2 days ago i upgraded with black satin normal edition. my phone worked 2 days normally but today touch screen has no reaction when i touch it.
firstly i wasnt panic because i tought it can be a software problem then i did hard reset. but still no reaction on my touch screen. i was starting to be panic. then i upgraded with O2 official rom again. unfortunately touch screen is still same. now my panic mode is active.
first, i mean time that i realized first about touch screen, all button was working fine, except touch screen
need some advice!!!
mrtkts said:
ive upgraded my hermes with official O2 hermes rom a month ago. 2 days ago i upgraded with black satin normal edition. my phone worked 2 days normally but today touch screen has no reaction when i touch it.
firstly i wasnt panic because i tought it can be a software problem then i did hard reset. but still no reaction on my touch screen. i was starting to be panic. then i upgraded with O2 official rom again. unfortunately touch screen is still same. now my panic mode is active.
first, i mean time that i realized first about touch screen, all button was working fine, except touch screen
need some advice!!!
Click to expand...
Click to collapse
When you flashed the other ROMS did you bypass the screen alignment screen somehow? Or is that where it is stuck?
Mike
yes when i pushed power buttons it passes boot scren and says "tap the screen to set up your windows mobile based device" because of the screen i cant touch it. so nothing more
thanks for reply
I had a similar problem, it turned out however to be an issue with the digitizer for the touch screen and it was simply a coincidence I was flashing roms.
I did the trick of sliding a credit card between the screen and the frame and cleared out some gunk - then it worked perfectly.
I just had the same thing happen lol.. company bought me a new one and cingular sent me a broken refurb so now they are sending another
Haz-Mat said:
I had a similar problem, it turned out however to be an issue with the digitizer for the touch screen and it was simply a coincidence I was flashing roms.
I did the trick of sliding a credit card between the screen and the frame and cleared out some gunk - then it worked perfectly.
Click to expand...
Click to collapse
hi haz-mat
can you give some details what have you done. did you open your ppc. because i live in turkey and i bought mt ppc form germany. so ive no garanty here. to fix it i need to send it to germany. it means at least 1,5 month. so ive to do it myself or someoneelse here
any other advice?
i just had the same problem after upgrading my new 8525 to wm6 then flashed again to shaps 3.54 then 3.60 and then back to wm6 because it had so many bugs. then screen stopped working. i took out battery/sim card for 10 minutes as well as using a receipt to clean out the screen (under the case) and worked just fine for 30 minutes. now the screen is dead again. YAY. got a 300$ piece of ****.
Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.
AgentBignose said:
Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.
Click to expand...
Click to collapse
It seems to be broken.Go to service.
Tadeusz said:
It seems to be broken.Go to service.
Click to expand...
Click to collapse
Yes I also think so.
Do you know how long it takes to let an Athena Repair?
Hi,
I got the MDA Vario II with T-Mobile UK (Hermes).
A friend tried to flash the ROM (don't know which one).
Active Sync connect, but as soon the phone freezes the connection is lost. Therefore I can't flash the ROM again.
On the bootloader screen it says:
HERM300
IPL-1.01
HERM300
SPL-1.09
When I power the phone up it shows on the T-Mobile start screen following.
M 05
S 04
B06 D 1.21
Sometimes 'No GSM' flashes up above the 'D 1.21'
Any ideas what I can do?
I did a few times a hard reset, where it went 1 out of 20 times to the 'set screen' settings. When the T-Mobile customization started it froze most of the time somewhere before it ended.
I got it now back to the today screen, after the customization seemed to nearly run through (3 pixels missing in the loadingbar at the end)
Any help very appreciated.
Since yesterday and suddenly my handset (XDA Orbit) can´t work. The reason is that a white screen has appear, with the red led switched on, on the top of the PDA and the vibration activated (This 3 elements appear at same time, together).
It was running under WM6. I tryed hard-reset with any result because at a low time this 3 elements appear and only stopped when I take of the battery.
Any one knows what is happening???
Any solution???
Thanks!!!
problem
Gelupin said:
Since yesterday and suddenly my handset (XDA Orbit) can´t work. The reason is that a white screen has appear, with the red led switched on, on the top of the PDA and the vibration activated (This 3 elements appear at same time, together).
It was running under WM6. I tryed hard-reset with any result because at a low time this 3 elements appear and only stopped when I take of the battery.
Any one knows what is happening???
Any solution???
Thanks!!!
Click to expand...
Click to collapse
sounds to me like a hardware problem.... try to put it in boot mode,and see if you can flash it ! if you succeed you are lucky
Hi,
I just bought a HTC HD 2, French and unlocked version.
I have a big issue with my phone: The device start, I use it 10 Minutes then lock it (stand by).
When I push the wake up button, the phone seem to work but the sreen turn ON and stay Black... By saying the screen is ON, I talking about the backlight
I tried a Hrad reset several times but the screen is black at boot.
Can this black screen issue is caused by a software problem? Beacuse the screen work well for some minutes...
Thanks for your answers
If there isn't even a boot loader splash screen i would say its something major. If you have only just got it then i would take it back or have you flashed a custom rom or used goldcard to flash a different stock rom. If you haven't I would take it back.
I have had my HD2 for about three weeks now. It came with 1.43, but have later on upgraded to 1.48 and now Im running 1.61. Two days ago I started to encounter a really annoying problem.
When I wake up the screen and slide the button the home screen appear but after one second, the screen turns off back to lock. Then I can unlock again, and again one second later the screen is off and back to lock. This often continues until I remove the battery.
Have you experienced the same problem?
Optiknerd, Thanks for your answer. I called UPS on 24 December, they're coming today.
I was just hopping there was a solution...'cause it's hard to quit this phone....
I never installed a modified ROM. The firt black screen apaired 10min after my first use. Even at boot I can't see anything and I have to Push ON/OFF more than 20 times to wake the screen up....
Freshou said:
Optiknerd, Thanks for your answer. I called UPS on 24 December, they're coming today.
I was just hopping there was a solution...'cause it's hard to quit this phone....
I never installed a modified ROM. The firt black screen apaired 10min after my first use. Even at boot I can't see anything and I have to Push ON/OFF more than 20 times to wake the screen up....
Click to expand...
Click to collapse
Did you install any software when the phone was working okay?
Also, when you get the black screen, hold down the power button and see if you get anything. I've had mine go black screen on me and that brought up the quick list. I selected lock and it worked fine after that.
See this please http://forum.xda-developers.com/showthread.php?t=606093, let me know if you have the same problem as me,cuz I havefigured out a solution and it works for me at least 2 days.
Freshou said:
Hi,
I just bought a HTC HD 2, French and unlocked version.
I have a big issue with my phone: The device start, I use it 10 Minutes then lock it (stand by).
When I push the wake up button, the phone seem to work but the sreen turn ON and stay Black... By saying the screen is ON, I talking about the backlight
I tried a Hrad reset several times but the screen is black at boot.
Can this black screen issue is caused by a software problem? Beacuse the screen work well for some minutes...
Thanks for your answers
Click to expand...
Click to collapse