Database Users

Help please - MDA Compact not booting up

Hello everyone! I really, really hope you can help me!
I have a T-Mobile MDA Compact. I was upgrading the ROM version tonight to the latest version (blackberry version) My MDA would appear to have crashed mid-way through the upgrade. The upgrade software told me to reset the device and try the upgrade again. So I reset the device.. all I get on the screen is "USB V1" and when I select the new rom file I get an error which says "Error 120: Country ID Error N-N-38-38-38" The ROM image that you are trying to use is not designed to work on your device. Please check the vender Website and download the correct ROM update.
This is the correct ROM update. I'm using a T-Mobile branded handset the update is definitely a T-Mobile update. Can anyone tell me what I'm doing wrong? is there another update or even a completely new ROM version I can use to get my phone working again? It's the only phone I've got and I urgently need it for work
Thanks, Tom :?

OK so now it loads up and gets as far as 'loading config txt' and then it just sits there. Again I try the rom update but I'm told ROM is wrong for my device.

Hi Tom,
Use maupgradenoid.exe or a simular named program from the ftp over here. Maybe you have to run it twice to bypass your error. Use the program instead of the, probably named maupgrade, .exe which you get when you unzip your shipped rom. No need to zip it again, just unzip into an empty folder put the maupgradenoid.exe in the same folder. Put your device in bootloader (camera & power & soft-reset until it reads serial v1) connect it to usb, now it reads usb v1 & run this noid.exe.
Good luck, M
Ps. sometimes you need to add or change a line in config.txt, you can find that in one of the latest posts by parklife in
the thread about the official TMO 1.13 rom

TomFoolery said:
Hello everyone! I really, really hope you can help me!
I have a T-Mobile MDA Compact. I was upgrading the ROM version tonight to the latest version (blackberry version) My MDA would appear to have crashed mid-way through the upgrade. The upgrade software told me to reset the device and try the upgrade again. So I reset the device.. all I get on the screen is "USB V1" and when I select the new rom file I get an error which says "Error 120: Country ID Error N-N-38-38-38" The ROM image that you are trying to use is not designed to work on your device. Please check the vender Website and download the correct ROM update.
This is the correct ROM update. I'm using a T-Mobile branded handset the update is definitely a T-Mobile update. Can anyone tell me what I'm doing wrong? is there another update or even a completely new ROM version I can use to get my phone working again? It's the only phone I've got and I urgently need it for work
Thanks, Tom :?
Click to expand...
Click to collapse
Incase you upgraded to a new T-Mobile ROM, i think you can take it to the T-Mobile store for fixing.

Perfect!! That seems to have worked!! Thank you!!!

THANKS
I had the same problem and I follow your instruction and it'goes perfectly fine.... My phone is now alive again
THANKSSSSSSSSS

Please some body answer

I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.

Sorry to hear that was it an eaby or simialr purchase?
if it is dodgy or needs rom/imei etc,tbh mate your on tricky ground sadly
as its hard to get help and people may assume its stolen etc ,even tho it seesm your the victim here
i hope im wrong and someone can highlight an easy remedy
maybe the radio stack has just encountered an issue

no it was purchased directly from uk.
and it was working just fine so why now?
no way to format & reinstall the original ROM?

tbh i dont know,but youll be hard pressed to find anywere to help without a imei,thats what i mean
Even tho it's not yourfault i think ,if you start messing with the imei ,its a poss jail term
so maybe people wont rush to aid you,hopefully someone with more expertise may be able to offer help
i just mentioned that due to the fact it may be why limited response to the post
i hope there is a simple and easy fix for you

elsaghirmo said:
I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.
Click to expand...
Click to collapse
did u try hard resetting the phone? try installing the rom with a RUU with no_ID
have a look on this page, this may give you additional info;
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal

Can you briefly describe how you did the ROM reinstallation (names of the files you opened, source, etc.)? You shouldn't be seeing the country code error message with the NO_ID installer.

have a look on this link;
http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error

You mentioned something about a problem with the radio stack. I tryed to install a No_ID rom and the system stopped at the radio stack update step.
So is it a hardware that has to be changed or exactly what?
and what has the radio stack to do with the IMEI no not appearing.
Sorry for disturbance but I 'm seeking any help

GSM Problems

Hi everyone !
I'm new here (in the Hermes forums). I have a prophet, but now I bought a Hermes.
The guy who originally owned (the phone is used) told me that when he flashed it, he had this problem that I'm going to tell you now, so I really don't know what could had happened to him during the flashing process.
The problem I have is that the Hermes works very well, the Wifi, bluetooth, card reader, everything EXCEPT the PHONE, let's say, the GSM interface.
When I turn it on, everything works well, (I DON'T SEE THE 'NO GSM' THING), and I have the antenna icon with the exclamation mark (!) next to it. When I go into there, in the phone configuration, if I try to select a network manually, after a few seconds it says that it can't retrieve the list of networks, that I have to try later. If I go to the band configuration, and I put it to use only gsm, for example, after a few seconds it says that it can't change the configuration, that I have to try later.
I tryed with different sims, of different companies.
When I bought the phone, it had a spanish Schap's 3.54b, and the Olipro 2.30 spl.
I tryed hard resetting, but nothing. I flashed the original shipped rom WM6.1 WWE, downloaded from here, and nothing. NOTE: I had to flash with the sd method because if I try to do it with the computer, I have the 260 error (or 262 i dont remember).
I changed the HARDSPL to theOlipro 2.10, hard reseted again, and still de same thing.
The IPL is 1.04.
NOTE: When I flashed the WWE rom, I flashed the .nbf file inside, but the SPL.nbf I didn't flashed.
What can I do? ANY SUGGESTIONS ?
I read a lot of things in the forums and in the wiki, but nothing. I've just finished downloading the Schaps WM6 4.31, now i will try to flash it with the sd thing.
Also, I have the protocol 32.80.7020.20H. I've read it somewhere but I don't remember what the protocol is. I HAVEN'T CHANGED THIS since I bought it, could that be my problem?
Currently, I have this (before flashing Schaps):
-Device Information:
ROM: 3.54.255.3
ROM DATE: 07/05/07
Radio Version: 1.47.00.10
Protocol: 32.80.7020.20H
ExtROM: 3.54.255.104
-In the bootloader:
IPL-1.04
SPL-2.10.Olipro

Maybe the antenna is no good...
1st thing I'd try though is to flash a new radio on (use sd card method). Worst that can happen is "No GSM" but as you can't use it anyway theres no harm in trying...
Check what radio rom you have 1st though so you can flash back if need be.
If you can get a "broken" Hermes (same model is best) then you can replace parts and see if that helps. I did this and found one of the parts that was causing a problem with my jasjam was the flywheel.
Do a search for the HTC service manual or go to Mike Channons web site to get heaps of manuals and tutorials...
Cheers...

The phone is near new, let's say, it was used for less than a month, he had it a week or two and then flashed it and had that problem, so I don't think that it's and antenna problem, and if it hadn't antenna, it has some signal of some kind.
Any other ideas?
I changed the radio when i Flashed the WWE version. I'm now downloading this one http://forum.xda-developers.com/showthread.php?t=298520
Any suggestions? is there any problem using the AKU 3 or something?
Thanks =)

Hey,
What about the protocol version? can I change it? how? cause I flashed it and the radio changed but the protocol is the same.
I'll try to flash it with windows vista, to see if I can, because XP won't let my.. olnly SD flashing

Ok, I Installed a cingular flash, now I've protocol 32.67.7020.10H. Radio:1.34.00.10 and still having the same problem. I don't know what to do now... any suggestions? !
thanks
PD: also tryed putting a little piece of paper over the sim but it didn't changed anything
PD2: The error I get when I go to Phone Settings -> Netowrk, and I choose "Manual" is: "Unable to read setting from the netowrk. Try viewing settings later, or disconnect data connection and try again.

Help: Cant Make Calls

I have Qtek 2020 with Rom CE Version 1.72WWE, but every time i try to upgrade to new roms:
(Previously Sundream's WM 6.5 WWE) and (Currently Syed Ather's WM 6.0)
Its giving me issues related to my network.
Signals are fluctuating, i cant make calls, neither recieve them, get messages in delay time more often, It avoids making me save contacts in sim card but after several attempts it succeeds.
Please Help me out. I am not getting this issue when i downgrade back to my Official Qtek 2020 1.72 Rom.

That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).

Thanks for Reply
Jadel said:
That is strange. Can you tell me, when you take your battery out, what is displayed on the sticker underneath? PH10a? PH10b?
Also, do you happen to know what Radio you are using? (The radio is seperate to the ROM).
Furthermore, and only if you remember, when you put your device into upgrade mode just before you flash a new ROM, what boot number does it say (IE Mine says V1.04 from memory).
Click to expand...
Click to collapse
Yeah let me tell you all the necessary Information
Official Qtek 2020 Rom Version: 1.72.00
Official Qtek 2020 Radio Version: 1.14.00
Upgraded to:
Syed Ather's WM 6.0 Profession (Currently)
Radio Version: 1.17.00
-------------------------------------
It is : PH10B
Bootloader Version : V1.04

My Network Details
Network Name: Ufone
Network Country: Pakistan (ASIA)
Details of How I Flashed My Roms
I went to Boot Loader First: (DPad+Power+Reset) (V1.04)
Attached it to my Laptop through its Cradle (Windows XP Used)
Serial changed to USB
Loaded HimaupgradeUT_NoID.exe file (dont remember exact Name)
and Upgrade the roms + Radio Later
Got Congratulation Screens
Hard Reset By (Camera+Record Button+Reset)
Using the NO,YES,YES things and Pressing DPAD
Important Thing to tell you
1-I didnt take out my Storage Card not even SIM Card of My Network Provider when Flashing both times the different roms.

Please Any one here to help me out

T-Mobile Wing Original ROM not Installing Problem!!!!HElP PLZZZZZZZZZZ

Hello
Guys im really new on this.....i have T-Mobile Wing...and i recently updated my ROM to 6.5 but i dont really like it so then i decide to downgrade it back to 6...but when i was downgrading my ROM back to 6 (downloaded from T-Mobile website) accidentally the cable went unplugged from my Wing...during the Downgrading process....after that now when i am trying to downgrade it again.. im having problem that>>>till the last step of downgrading everything goes correct but when the process start and when progress reach to 1% my Wing restart itself and my goes in OS(which work fine) and>>ya i tried different 6.5 ROMS i got successful in installing but not in T-Mobile Original ROM<<....can anyone tell me what happen to my phone and how i can solve my problem...... after restarting i got error in T-Mobile ROM >>(ERROR [260] : Connection)......plzzzzzzzzzzz need ur help im really worried plzzzzzzzzz guys help me out......pictures are given below...
thankx alot for ur help.....

Hmn. I would also like some help with this too, as I recently came into a wing that had been 'upgraded' to one of the ROMs from wingster before I received it. I was able to hard reset it thru the settings but when I go to install the 'official' T-Mobile ROM over the hard reset it does the same thing: (ERROR [260] : Connection) and I have tried to do this again after a PC reboot, no luck.
Please and Thanks.
After digging around a bit more, I hope this helps:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=364543
Click to expand...
Click to collapse

thankx but again problem....
bro thankx alot for u r reply i just extract T-Mobile original ROM (.exe) file and just copy the ROM files and i install it through FLASH CENTER which works fine....my problem is sloved ...Now again im having new problem which is when i lock my phone through the power button....i m unable to recieve any call or any message.....but im able to recieve call n messages when my phone is unlock....i think when i lock my phone it disable all the connection such as (WIFI,Bluetooth and including My phone Connection and etc....)so can u help me out how can i disable this thing or can u help me out what exactly problem im having....thankx in advance..