Hello everyone! I really, really hope you can help me!
I have a T-Mobile MDA Compact. I was upgrading the ROM version tonight to the latest version (blackberry version) My MDA would appear to have crashed mid-way through the upgrade. The upgrade software told me to reset the device and try the upgrade again. So I reset the device.. all I get on the screen is "USB V1" and when I select the new rom file I get an error which says "Error 120: Country ID Error N-N-38-38-38" The ROM image that you are trying to use is not designed to work on your device. Please check the vender Website and download the correct ROM update.
This is the correct ROM update. I'm using a T-Mobile branded handset the update is definitely a T-Mobile update. Can anyone tell me what I'm doing wrong? is there another update or even a completely new ROM version I can use to get my phone working again? It's the only phone I've got and I urgently need it for work
Thanks, Tom :?
OK so now it loads up and gets as far as 'loading config txt' and then it just sits there. Again I try the rom update but I'm told ROM is wrong for my device.
Hi Tom,
Use maupgradenoid.exe or a simular named program from the ftp over here. Maybe you have to run it twice to bypass your error. Use the program instead of the, probably named maupgrade, .exe which you get when you unzip your shipped rom. No need to zip it again, just unzip into an empty folder put the maupgradenoid.exe in the same folder. Put your device in bootloader (camera & power & soft-reset until it reads serial v1) connect it to usb, now it reads usb v1 & run this noid.exe.
Good luck, M
Ps. sometimes you need to add or change a line in config.txt, you can find that in one of the latest posts by parklife in
the thread about the official TMO 1.13 rom
TomFoolery said:
Hello everyone! I really, really hope you can help me!
I have a T-Mobile MDA Compact. I was upgrading the ROM version tonight to the latest version (blackberry version) My MDA would appear to have crashed mid-way through the upgrade. The upgrade software told me to reset the device and try the upgrade again. So I reset the device.. all I get on the screen is "USB V1" and when I select the new rom file I get an error which says "Error 120: Country ID Error N-N-38-38-38" The ROM image that you are trying to use is not designed to work on your device. Please check the vender Website and download the correct ROM update.
This is the correct ROM update. I'm using a T-Mobile branded handset the update is definitely a T-Mobile update. Can anyone tell me what I'm doing wrong? is there another update or even a completely new ROM version I can use to get my phone working again? It's the only phone I've got and I urgently need it for work
Thanks, Tom :?
Click to expand...
Click to collapse
Incase you upgraded to a new T-Mobile ROM, i think you can take it to the T-Mobile store for fixing.
Perfect!! That seems to have worked!! Thank you!!!
THANKS
I had the same problem and I follow your instruction and it'goes perfectly fine.... My phone is now alive again
THANKSSSSSSSSS
Related
I upgraded my pda with t mobile 4.01 beta rom then i was trying to get rid of it and upgrade to ATT latest rom. but it was not letting me to GET rid of it. SO i was trying many thing after doing them i saw that my pda`s phone feature is gone. then i installed RSU "PROGRAM B" SOURCEO2.com that is 4.0 something. I HAVE TRIED MANY THING BUT NO USE I HAVE ALSO DOWNGRADED TO WIN CD 2002
may be the att RSU will solve the problem. please tell me where to download it from.
the mobile was running on 900/1800
NOW THE PDA IS NOT DETECTING ANY SIGNALS.
AND I FEEL LIKE CRYING B/C IT WAS MY BROTHERS WHO GAVE IT TO ME FOR UPGRADING
Looks like you have the same Problem as i have. Check if your GSM-Module is still doing: You have to get into the Bootloader and check if it says "GSM OK" (then you are a lucky owner) or if it says "GSM Error" (then you´ve got the same problem as I´ve got). If it is the second case: Try this one: http://forum.xda-developers.com/viewtopic.php?t=1182&highlight=solved+gsm+error
Or this one: http://forum.xda-developers.com/viewtopic.php?t=4123&highlight=screen+1
But i need to say that these tips haven´t helped me out of this Prob. I hope it will help you!
So long...
no error any where GSM OK
NO HANGS every thing is fine.
Where can i down load ATT .20 RSU
I downloaded the rsu for ATT from yorch.net and now its getting signals.
Hi everybody:
I've just crashed my himalaya when i ran ClearJumpCode... how could i fix it???
Somebody is going to kill me before 2005
Please anybody could help me
thanksssssssssssssssssssss
Try hard reseting your device if still not. reflash it...
you have to re-flash the device.... you had just cleared it of its Identity... goodluck!
Yes, I did on mine also and you don't have a choice but to upgrade the device (flashed). After I upgrade my device my device its now showing O2 on my operator ID. I used to be TMOBILE. I guess runing clearjump on your device erase even operator ID. Can someone enlighten this...
So, it means that you can flashed your device without changing operator ID as long as all nbf files are the same operator. (this is just a wild guess). :roll:
I recently bought an SD-502 receiver for my XDAII and have no end of trouble since. I was hesitant to buy it given the compatibility problems but latest compatibility lists say that it has been tested and works. Long story short, COM 7: which is supposed to be assigned to GPSUART as per GPS PPC websites is absent and I cannot find any way to add it. I have upgrade from WM2003 1.60 to 1.72 and there was no change.
Further to this, I have downloaded the WM2005 upgrade in the hope that It would recognize the device but now I can't load any version of WM withouth the Himaupgrad.exe saying that there was 'a problem during upgrade'.
Thanks to anyone who chooses to help.
Can you be more specific about this 'problem during upgrade'?
That's what Himaupgrad.exe calls it... verifies the ID of the pda and then you click yes to upgrade and it goes to the screen where it clears the current rom and loads the 3 new ones and instead of doing that, after about 30 secs it just says there was a problem during upgrade and says to soft start the pda, which I have tried with no success. I have tried many combinations of Radio, Ex Rom and Rom without luck. I have even tried the original upgrade package that is already on there which I downloaded from the UK o2 site and that gives the same error. So I figure it is something to do with the PDA not the upgrades.
Again, any help is much appreciated!
Thanks jamil
I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.
Sorry to hear that was it an eaby or simialr purchase?
if it is dodgy or needs rom/imei etc,tbh mate your on tricky ground sadly
as its hard to get help and people may assume its stolen etc ,even tho it seesm your the victim here
i hope im wrong and someone can highlight an easy remedy
maybe the radio stack has just encountered an issue
no it was purchased directly from uk.
and it was working just fine so why now?
no way to format & reinstall the original ROM?
tbh i dont know,but youll be hard pressed to find anywere to help without a imei,thats what i mean
Even tho it's not yourfault i think ,if you start messing with the imei ,its a poss jail term
so maybe people wont rush to aid you,hopefully someone with more expertise may be able to offer help
i just mentioned that due to the fact it may be why limited response to the post
i hope there is a simple and easy fix for you
elsaghirmo said:
I own a universal o2 xda exec purchased from uk. It has been working greatly for about 8 month (on another SIM provider) without any troubles.
Suddenly it receives no signal, the phone doesn't seem to see the SIM, I can't enen access the phone settings.
After performing a soft reset I checked the device information and found that radio version & protocol version are BLANCK noyhing is written, also the IMEI number doesn't exist, nothing is written.
I tried to install a new ROM but it didn't work, I got an error message about my ROM image that is not compatible with my country code!!!!!!
I've been advised to reinstall the WM5????
Please advise.
Click to expand...
Click to collapse
did u try hard resetting the phone? try installing the rom with a RUU with no_ID
have a look on this page, this may give you additional info;
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Can you briefly describe how you did the ROM reinstallation (names of the files you opened, source, etc.)? You shouldn't be seeing the country code error message with the NO_ID installer.
have a look on this link;
http://wiki.xda-developers.com/index.php?pagename=Instructions for those with Country Code error
You mentioned something about a problem with the radio stack. I tryed to install a No_ID rom and the system stopped at the radio stack update step.
So is it a hardware that has to be changed or exactly what?
and what has the radio stack to do with the IMEI no not appearing.
Sorry for disturbance but I 'm seeking any help
Hello
Guys im really new on this.....i have T-Mobile Wing...and i recently updated my ROM to 6.5 but i dont really like it so then i decide to downgrade it back to 6...but when i was downgrading my ROM back to 6 (downloaded from T-Mobile website) accidentally the cable went unplugged from my Wing...during the Downgrading process....after that now when i am trying to downgrade it again.. im having problem that>>>till the last step of downgrading everything goes correct but when the process start and when progress reach to 1% my Wing restart itself and my goes in OS(which work fine) and>>ya i tried different 6.5 ROMS i got successful in installing but not in T-Mobile Original ROM<<....can anyone tell me what happen to my phone and how i can solve my problem...... after restarting i got error in T-Mobile ROM >>(ERROR [260] : Connection)......plzzzzzzzzzzz need ur help im really worried plzzzzzzzzz guys help me out......pictures are given below...
thankx alot for ur help.....
Hmn. I would also like some help with this too, as I recently came into a wing that had been 'upgraded' to one of the ROMs from wingster before I received it. I was able to hard reset it thru the settings but when I go to install the 'official' T-Mobile ROM over the hard reset it does the same thing: (ERROR [260] : Connection) and I have tried to do this again after a PC reboot, no luck.
Please and Thanks.
After digging around a bit more, I hope this helps:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=364543
Click to expand...
Click to collapse
thankx but again problem....
bro thankx alot for u r reply i just extract T-Mobile original ROM (.exe) file and just copy the ROM files and i install it through FLASH CENTER which works fine....my problem is sloved ...Now again im having new problem which is when i lock my phone through the power button....i m unable to recieve any call or any message.....but im able to recieve call n messages when my phone is unlock....i think when i lock my phone it disable all the connection such as (WIFI,Bluetooth and including My phone Connection and etc....)so can u help me out how can i disable this thing or can u help me out what exactly problem im having....thankx in advance..