Atom Camera Templates - iPAQ rw6828, XDA Atom General

I have downloaded the additional camera templates from the O2 site. I installed them into the hidden partition section where the other files are but they do not show up in the camera. Is there something else i need to do. There was only .gif files downloaded no .blf or something files. Is this the reason.

did you try to restart windows?

Yes i have several times.

I have only one idea - write [email protected] and ask them

camera hank
please help me my camera xda atom hank

You have to use GIF image sized 640x480 (not 480x640). Use EasyGIF Editor and create 3 frames with appropriate mask and transparency.

thomastran said:
You have to use GIF image sized 640x480 (not 480x640). Use EasyGIF Editor and create 3 frames with appropriate mask and transparency.
Click to expand...
Click to collapse
Have you tried this? How about a step by step instruction on placing it in the hidden partition.
Thanks.

kropotov said:
I have only one idea - write [email protected] and ask them
Click to expand...
Click to collapse
This is the funny part. Here's the e-mail exchange between me and O2
Me (6 June):
Is there a way to add camera templates to the camera?
Thanks.
O2 (8 June):
Thank you for contacting O2 Asia Technical Support.
With regards to your query below, you may wish to provide us with more details on what sort of template you wanted to add to your camera in order for us to provide you with the necessary assistance.
Thank you.
Me (8 June):
The templates which is used when taking photos using the camera
Me (9 June):
The template used when using the Photo (Frame) mode while taking photo. Previously for O2 Xda II mini, it is called Camera Templates and they are available to be downloaded at www.seeo2.com
O2 (12 June):
Thank you for contacting O2 Asia Technical Support.
With regards to your query below, kindly note that the Camera Templates from O2 Asia website is available for Windows Mobile 2002 and 2003 devices only. You may like to refer to 3rd party software developer for software application (if any). Kindly find below some URL link to 3rd party developer search engine for your reference only.
www.pocketgear.com
www.handango.com
www.clickapps.com
Please take note that these software are developed by 3rd party developer, therefore the support provide by O2 Technical support is limited on these software. You may contact the software developer for more information regarding on the compatibility of the software with O2 mobile device.
** Some software provide trial version for user to test before any actual purchase. Refer to the developer for more detail.
Should you require any further assistant, kindly reply to this email. Thank you.
Note: Silly me for contacting O2.

mcs_tech said:
I have downloaded the additional camera templates from the O2 site. I installed them into the hidden partition section where the other files are but they do not show up in the camera. Is there something else i need to do. There was only .gif files downloaded no .blf or something files. Is this the reason.
Click to expand...
Click to collapse
try to put it to my device~my document~templates than soft reset.

ymchow said:
try to put it to my device~my document~templates than soft reset.
Click to expand...
Click to collapse
That doesn't work anymore. The camera app for WM5 places the templates in the hidden partition. For pre-atom life, search in this forum about camera template (another thread). The walkthrough is in thai but the images gives us clues on what is written (it's on other host. link posted by me). For atom life, no solution yet.

I thought you just copied the gif's to the templates folder on the phone or sd card, thats where mine live

Related

I've managed to compile cryptophone for PocketPC 2003

I've build a version of crypto phone for PocketPC 2003. ( unsing the sources from www.cryptophone.de ),
with some workarrounds for license test.
I don't have two phone to test it yet. If anyone can test it please send feedback.
As i see it use data call as link layer so your provider must suport it.
PS: Who's testing it , please send feedback.
I've tested in my Qtek 2020, (XDA II, MDA II…).
Is it working? I was able to compile it too, but it died on exchanging keys.
mamaich said:
Is it working? I was able to compile it too, but it died on exchanging keys.
Click to expand...
Click to collapse
Don't work. :-(
I have programmed 2 xda 1 with wm2003 and the crypto, it works perfectly. The only bug is the "file" bar vanishes after a call is placed or received, other than that its great. 8)
Can you post what you changed in the source file in order we could reply your compiled code?
The idea is simple, if we can have access to the original source code and can do the changes you documented, generating the same code as you, with the same hash value for the encrypted code, we can assure that your code have the same security of cryptophone.
dumb ?
what is cryptophone?
Hi,
i am very interested in this (or a similar) software for
the Wallaby or Himalaya platform.
Anyone here who has a working & easy too install binary?
(Or are there any real free & opensource applications like cryptophone?).
kind regards,
Ben
Has anyone managed to get cryptophone working on the XDA ??
... or find a similar program ??
Regards
There are several similar commercial projects. Just wait some time for their announcements.
mamaich said:
There are several similar commercial projects. Just wait some time for their announcements.
Click to expand...
Click to collapse
Hi mamaich,
thnx for that prompt reply
I know about cryptophone.de, raseac.com.br & caspertech.com
Are there any others I have missed ??
Regards
John
2-3 russian companies are also working on similar projects. I don't know their sites.
cryptophone Somebody to compiled? for motorola smartphone mpx220 :?
one more company.
http://www.securegsm.com
and question - where is source download page on http://www.cryptophone.de ?
in general "cryptophone" application isn't difficult
- good vocoder
- some crypto
- good realtime data transfer - CSD for GSM network
- some audio components like AEC
could some one point me to good ARM implementation of vocoder with 2.4-4.8kbitps bitrate? ARM9(v5) PXAxxx ~100MIPS.
Free is preferable, but reasonable commertial offers are welcome too.
just a question,
isn`t it possible with the sourcecode of this software and the sdk for windows mobile 2003 smartphones to make a installer?
is very interesting, or?
is there any other software for ppc or smartphone avalable?
a free wm5 client for this should be awesome! coders go compile now!
is the encryption limited to "only" this version of application ?
- or is there some sort of standard ?
ryhor said:
one more company.
http://www.securegsm.com
and question - where is source download page on http://www.cryptophone.de ?
in general "cryptophone" application isn't difficult
- good vocoder
- some crypto
- good realtime data transfer - CSD for GSM network
- some audio components like AEC
could some one point me to good ARM implementation of vocoder with 2.4-4.8kbitps bitrate? ARM9(v5) PXAxxx ~100MIPS.
Free is preferable, but reasonable commertial offers are welcome too.
Click to expand...
Click to collapse
here
http://www.cryptophone.de/support/downloads/downloads.html
Lord Ashmedai said:
I've tested in my Qtek 2020, (XDA II, MDA II…).
Click to expand...
Click to collapse
Hi, did you manage to get it to work?
I tried on my O2 xda... it hung on the key exchange part...
It concerns me that this program starts two processs, spcore.exe and ui2003.exe. I have not looked over the code, but can you tell me why it must use two. Furthermore once they are going there is no way to stop the spcore.exe. My guess is that if that process contains the thread that is waiting for tapi events, its stopping mechanism has not been implemented properly. If you want to make a thread that is waiting for the event for line state then when the user wants to stop the thread/process, the event interest needs to be reset. eg SetCommMask(hSerialHandle,0); ,but it must be done from the ui thread not the waiting thread because obviously the waiting thread cant do anything. Once it is set to 0 (as apposed to EV_RXCHAR for example) the waiting thread will finish waiting imeadiately.
I tried sending a message to destroy the window with no effect, I then tried using terminatethread to stop it but that did not work so it must be in an api call (such as waiting).
On my mini it starts up ok, and dose not interfear with the phone. I could not test the functionality because the only other phone I had with me was my xda and it dose not install corectly on that. No error messages on intalation but the icon in the program files is not shown properly and it fails when I try to start it.

[release] PhoneContacts

This is my first project for PocketPC. It's a simple Contacts replacement with search keypad.
PS: .NET CF 1.1 is required.
16/9/2006
- WM5.0 version added (category filter, contact update, contact delete bugs fixed)
11/9/2006 - 1.1.3.0
- Contacts list loads more faster on large amount of data
- Name filter and back button improved
3/9/2006
- Load Categories bug fixes
14/7/2006
- Added .NET 2.0 version
5/07/2006 - 1.1.2.0
- Added category filter
13/06/2006 - 1.0.1.6
- Some bug fixes
- Added Tools - Save Config
- Added Name [display] format
any screen shots of usage screens and config screens?
tested with which models?
tested with which os? wm5 or 2003se or?
Size of program after install?
It' tested only on O2 XDA mini, WM2003.
can you please upload it here. it says the file is corrupt if i download it. thanks
Here it is...
... moved into the first post
does this work with WM5?
Installed on Qtek 9100 WM 5. It works perfectly.
The only defects are:
When it is exited from the program loses the formulations of the English language and the dimension of the font.
Is not possible to set up the order of reading of the contacts 1°/2° or 2°/1° name.
dborello said:
Installed on Qtek 9100 WM 5. It works perfectly.
The only defects are:
When it is exited from the program loses the formulations of the English language and the dimension of the font.
Is not possible to set up the order of reading of the contacts 1°/2° or 2°/1° name.
Click to expand...
Click to collapse
About configuration(lang, font...): I dont know how program works on WM5. I'll try to correct it as soon as possible and i will add order of reading ( <FN MN LN> and <LN, FN> ).
thanks CDK. ill post it on my blog http://oldsap.blogspot.com
Great job - really. I love it. it works perfectly on my QTEK9100 as posted already. This is one tool which will replace the built in contacts.
Some more suggestions and hints:
- Program loading lasts very long - maybe it is decreasable??
- If i write a name the tool greps for all matches in the first and the last name. That is great. I love it. Is it possible to search also in the middle of the string. Example: Alex and i type lex
- Is it possible to grep not only first and last name but also the other fields which are defined in the Pocket Outlook Object model?
- Is it possible to have more search boxes or filter for the categories?
- Maybe it is possible to have a WM05 compile where for example a context menu pops up with all the selectable categories
- The russian/english problem posted already is also on my device
A lot of requests. Let me know if you find some useful.
Thanx anyway for this great app.
how do you install this? just copy all the files into a folder and run?
topcaser said:
Some more suggestions and hints:
- Program loading lasts very long - maybe it is decreasable??
- If i write a name the tool greps for all matches in the first and the last name. That is great. I love it. Is it possible to search also in the middle of the string. Example: Alex and i type lex
- Is it possible to grep not only first and last name but also the other fields which are defined in the Pocket Outlook Object model?
- Is it possible to have more search boxes or filter for the categories?
- Maybe it is possible to have a WM05 compile where for example a context menu pops up with all the selectable categories
- The russian/english problem posted already is also on my device
Click to expand...
Click to collapse
Ok. I give some explanation. This program is written for my request and with my collaboration. That's why i try to answer some questions and I will post, sometimes, new release.
1. This is .NET :-( Here is a "hide"-feature added to solve (temporary) this problem. I think F.T.D. post here the source code as soon as possible. May be someone rewrite this on native C.
2. May be. But this may be unusable with huge contacts lists...
3 & 4. Describe, please, what you want to see. Perhaps this will be added in the hext releases.
5. ... requires WM5 device... :-(
6. This is corrected and will be posted today (if we understand the problem correctly)
ikkoku said:
how do you install this? just copy all the files into a folder and run?
Click to expand...
Click to collapse
Yes.
topcaser said:
...
- Is it possible to have more search boxes or filter for the categories?
- Maybe it is possible to have a WM05 compile where for example a context menu pops up with all the selectable categories
...
Click to expand...
Click to collapse
I will be VERY appreciate if you show me how to get available categories in system (it might be as well in .NET)
good job
have sudjustion.. i think it's beter to put the keys in ordenary like on the keybord .. it will be faster to tape for users how know where is every key in the keybord
thanks
miky420 said:
good job
have sudjustion.. i think it's beter to put the keys in ordenary like on the keybord .. it will be faster to tape for users how know where is every key in the keybord
thanks
Click to expand...
Click to collapse
I think it will become customizable in the next releases.
For example:
- main file is a list: [picture name=text file (symbols code list)]
- every keyboards are: picture itself and text file with symbols code.
updated. see first post for details.
that's really gr8.... i like it......
is there a way this can work with .net cf2 because i have a .net cf2 loaded rom on my 8125 and when i try to run this it gives me an error
cybiker123 said:
is there a way this can work with .net cf2 because i have a .net cf2 loaded rom on my 8125 and when i try to run this it gives me an error
Click to expand...
Click to collapse
uploaded

Orange SPV M3100 lacking BT SIM Access Profile

I have now had my M3100 for a week now and in some ways it is excellent in others frustrating.
There are some specific aspects I would love to change however the main one that is frustrating me today is that SIM Access Profile is described in the User Manual (the first one I have seen from Orange that has not been rewritten Orange stylee and so I presume is from HTC) but it is not accessible.
Full instructions are given for SAP and when you got to Programs the SAPSettings program is not there.
I presume Orange have removed this so that they can protect their Memory Mate revenues, in the same way MSN has been removed to protext SMS revenues.
Is it possible to restore SAPSettings to the phone - is it still on there but simply 'turned off'?
Assistance to someone not too technical would be appreciated.
Other questions include how to reorder my contact list by first name - Symbian does this but not WinMob as far as I can see.
Thanks in anticipation
Trout
I think Orange actually deletes them during their customisation. There's 4 files (well, 3 plus a link) called sapsettings which need to go into your windows folder on the M3100. I've posted them to the ftp server just now - I'll post a link once they're available for download or just keep checking - I called the file sapsettings.zip. I've copied these onto my M3100 (from a friend's TyTn) and all works fine.
When I say works, I mean that they run fine. Actually, the SAP functionality in the current rom for the TyTn and the M3100 is pretty poor and doesn't work very well. They're updating it in a "forthcoming" rom - don't know when, but hopefully soon.
petes said:
I've posted them to the ftp server just now - I'll post a link once they're available for download or just keep checking - I called the file sapsettings.zip.
Click to expand...
Click to collapse
Moved to safe heaven, file is here.
Fantastic guys - thanks for your help
Sorry - I am back.
I have loaded all four files into the Windows folder and when I try and start the SAPSettings program get this message.
"The file 'SAPSettings' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file"
I have loaded all four files from the ZIP and they all transferred OK. Do I need to update the registry or am I just missing something really obvious.
TIA it is my first time 'under the covers' of a Windows mobile.
Trout
I have tried re-downloading and reinstalling these four files into the WINDOWS folder. Still get the same message.
Any help please guys and gals?
I don't get a program icon in the program window - I can only see the executable in when using File Explorer in the folder where I installed it.
Trout
SAP and Orange SPV M3100
http://forum.xda-developers.com/showthread.php?t=282544&page=2&highlight=rsap
This thread should solve your problems....as long as you dont have a Mercedes Bluetooth car kit!!

[UPDATED 23/12/2008 v. 1.5.3] Pocket Program manager

Hello, sorry for my bad english but i'm italian
I have created the program Pocket Program Manager.
This is a program for access to program stored in the online database www.programmersparadise.org/PPM
for download and install the program directly into the pocket pc.
The db is in upgrade, if you want partecipate post a program at this link
http://www.programmersparadise.org/PPM/program/EditProgram.aspx
Homepage:
http://www.programmersparadise.org/ProjectRepository/Project/ViewProject.aspx?id=2
sorry,for now is only in italian
Direct download
http://www.programmersparadise.org/PPM/program/DownloadProgram.aspx?id=27
Language
English,Italian
With this version is possible to create your own installer program named .ppz that you can install with simple click on ppz on your pocket pc.
This is a simple zip with a config file,here you can find a simple file for install an igo8 skin, open with zip program for wiew the config.
http://www.programmersparadise.org/ProjectRepository/Project/Download.aspx?id=39
I'm here for question
As I understand this is a kind of on-device software catalog, which allows installing software directly from device. The site currently lists 57 programs for download.
This project is something WM devices have been always missing.
Good luck in your project!
Yes,
this is the project.
If you know an application to add post it to the site.Now i'm working on download file from rapidshare
acquariusoft said:
Hello, sorry for my bad english but i'm italian
I have created the program Pocket Program Manager.
Click to expand...
Click to collapse
Thanks for sharing.
Ciao, Andrea
Does the Geko project know about this? This seems to be the exact thing they were developing...
Iceman692 said:
Does the Geko project know about this? This seems to be the exact thing they were developing...
Click to expand...
Click to collapse
i haven't seen this project.
Have you some link?
[22/11/2008 v. 1.3.0] Pocket Program manager
Upgade 1.3.0
release note:
- bug fix
- now is possible download files from rapidshare
Download from homepage, directly from pocket program manageer
Direct download
http://www.programmersparadise.org/ProjectRepository/Project/Download.aspx?id=40
Is your program skinable? It would nice to see a thumb friendly interface.
curious george said:
Is your program skinable? It would nice to see a thumb friendly interface.
Click to expand...
Click to collapse
Hi,
not for now if you have an idea for modify the interface i can insert into the program.
acquariusoft said:
Hi,
not for now if you have an idea for modify the interface i can insert into the program.
Click to expand...
Click to collapse
My recommendation would be to increase the vertical distance between each row. Maybe to a distance that allows 6 or 7 selections to be shown at a time. You could also increase the font size then for an easy read. I just hate having to pull out my stylus. It annoys me.
What do you think of adding a setting to allow it to work with a users windows skydrive account? Like I would put in my skydrive url and it would pull down a list from there that I could download from.
Just thoughts. Amazing go at this!!
curious george said:
My recommendation would be to increase the vertical distance between each row. Maybe to a distance that allows 6 or 7 selections to be shown at a time. You could also increase the font size then for an easy read. I just hate having to pull out my stylus. It annoys me.
What do you think of adding a setting to allow it to work with a users windows skydrive account? Like I would put in my skydrive url and it would pull down a list from there that I could download from.
Just thoughts. Amazing go at this!!
Click to expand...
Click to collapse
hi,
the idea of increase font and row is good. i do this in next release.
I use the application with my finger, you have a big finger
for adding the skydrive to the application,i haven't find documentation for access to if, if you have some you can send me?
For now the application work with online database, but i want add the possibility to create your own database.
All idea is welcomed
thanks for share
acquariusoft said:
hi,
the idea of increase font and row is good. i do this in next release.
I use the application with my finger, you have a big finger
for adding the skydrive to the application,i haven't find documentation for access to if, if you have some you can send me?
For now the application work with online database, but i want add the possibility to create your own database.
All idea is welcomed
Click to expand...
Click to collapse
Yeah I have fat thumbs, I am a freak!!
This is the info on Windows Sky Drive: http://www.windowslive.com/explore/...0B3ABB4-9E9F-4F5E-A45F-30D02666EB7D&WT.srch=1
After a little reading you will see that a user can set up a storage bin online. They can private password protect somefolder and share others. Each folder gets its own special url so it is easy to navigate to by link.
curious george said:
Yeah I have fat thumbs, I am a freak!!
This is the info on Windows Sky Drive: http://www.windowslive.com/explore/...0B3ABB4-9E9F-4F5E-A45F-30D02666EB7D&WT.srch=1
After a little reading you will see that a user can set up a storage bin online. They can private password protect somefolder and share others. Each folder gets its own special url so it is easy to navigate to by link.
Click to expand...
Click to collapse
mmm interesting
for now if you want you can edit the file default.ppm in the db folder. this is a text file and you can add row with the link of your application
the line for application is
P|id_application|id_category|name|version|download_cab|homepage|description|0=freeware 1=demo|money|tumbnail|0
Updated versione 1.3.1
Last update:
- Now the ppz files can create shortcut and ask for install dir
- Now is possible to install the program packed in zip files.
- Sorted list
- bug fix
- Option for size of font in the program list
please upgrade the program for use the last update in the database
Little update 1.3.2 for bugfix
Version 1.4.0
- Bugfix
- Now is passible to use varius db, created also from user
now anyone can create is db,upload it on rapidshare and share with comunity!!
suggestion
hello !
very good idea
can you make a filter on the program list with a categorie like "freeware" "shareware" etc ...
And will you translate your website in english.
Because my italian is very poor
thanks !
hello,
yes,the filter is very useful, i develop it in next release.
at the address www.programmersparadise.org/PPM you can find an english flag in upper right corner for translate the site in english.
6gex said:
hello !
very good idea
can you make a filter on the program list with a categorie like "freeware" "shareware" etc ...
And will you translate your website in english.
Because my italian is very poor
thanks !
Click to expand...
Click to collapse
just a suggestion i'm italian like you but if you wanna this cool tool get fans ... you have to switch main language to english.. also in the website.

Using Dual-Camera to produce a stereostopic view in realtime

Hey there,
I tried to create an app with the HTC One M8 and it´s Duallens "depthsensor".
The problem is that there is no way to activate the second rear camera in android.
In android.hardware.camera package there are some hidden methods like : enableSubCam...so I´ll tried to use java reflection to activate these SubCam, but it doesn´t work at all...
I need some depth information in realtime for my application and I thought with the new DualLens this would be possible.
Also I tried to understand the HTC DualLens SDK, but all this stuff works on an jpg format and without creating an new depthMap
So what do you think is the best method to access 1. the second rear camera or 2. directly some kind of depthMap with help from HTC SDK?
gurd123 said:
Hey there,
I tried to create an app with the HTC One M8 and it´s Duallens "depthsensor".
The problem is that there is no way to activate the second rear camera in android.
In android.hardware.camera package there are some hidden methods like : enableSubCam...so I´ll tried to use java reflection to activate these SubCam, but it doesn´t work at all...
I need some depth information in realtime for my application and I thought with the new DualLens this would be possible.
Also I tried to understand the HTC DualLens SDK, but all this stuff works on an jpg format and without creating an new depthMap
So what do you think is the best method to access 1. the second rear camera or 2. directly some kind of depthMap with help from HTC SDK?
Click to expand...
Click to collapse
i remember there was an app (german) that take 2 pictures at the same time from both rear cameras but the app was just to show that both work so it was like open app>automatic capture>save both pictures>exit.
got it : http://forum.xda-developers.com/showthread.php?t=2722352
yeah I´ve seen this app, but it´s hard coded on the linux kernel ...
and like I said I´ll try to calculate the depthMap in realtime, so a continious Depth-Matrix with opencv for example and not just a jpg
isn´t there a possibility to access the hardware components of an smartphone and activate them?
gurd123 said:
yeah I´ve seen this app, but it´s hard coded on the linux kernel ...
and like I said I´ll try to calculate the depthMap in realtime, so a continious Depth-Matrix with opencv for example and not just a jpg
isn´t there a possibility to access the hardware components of an smartphone and activate them?
Click to expand...
Click to collapse
Maybe this will help you
Code:
[URL="https://www.htcdev.com/devcenter/opensense-sdk/htc-dual-lens-api/htc-dual-lens-sdk-installation/"]https://www.htcdev.com/devcenter/opensense-sdk/htc-dual-lens-api/htc-dual-lens-sdk-installation/[/URL]
like I said in the first post, I´ve tried to understand the SDK, but in my oppinion it´s not for creating a file...
you´re just allowed to use the already created depth information of an jpg-file...
or has anyone made some other experiences with the SDK?
Have you solved the problem?
Hi,
I have the similar situation and would like to know if you have found a solution to this problem.
I agree with you that the SDK provided by the HTC website is for depth info extraction from already created image. The SDK is not viable for realtime depth processing.
Please let me know if you have the solution for this problem.
Thanks!
gurd123 said:
Hey there,
I tried to create an app with the HTC One M8 and it´s Duallens "depthsensor".
The problem is that there is no way to activate the second rear camera in android.
In android.hardware.camera package there are some hidden methods like : enableSubCam...so I´ll tried to use java reflection to activate these SubCam, but it doesn´t work at all...
I need some depth information in realtime for my application and I thought with the new DualLens this would be possible.
Also I tried to understand the HTC DualLens SDK, but all this stuff works on an jpg format and without creating an new depthMap
So what do you think is the best method to access 1. the second rear camera or 2. directly some kind of depthMap with help from HTC SDK?
Click to expand...
Click to collapse

Categories

Resources