Hi
Anyone had any issues with the wifi card on the V1605 or variants?? Mine will connect to a linksys router no probs but not to my Draytek 2900.
Have removed security and made sure all fimware is upto date on the router and even switched it to either B or G only but no go.
The phone now has the depod firmware and still wont connect just keeps trying and failing.
My Wizard connects perfect every time with or without WEP.
Does anyone have the Qtek or Imate firmware they want to share??
Skype runs pretty good but no use if my v1605 wont connect to my router!
Related
I searched the forum, and didn't find any solution for this problem.
The problem is I can connect to every network except my own. I can connect with my laptop to my network, my brothers computer connects fine to it, and the router never gave me any problems until now.
The router is a WRT54GX4, i am guessing it has something to do with the latest rom 2.26 not being able to connect to it because of the mimo "feature"
I heard that older qtek roms were able to connect to the router (could someone verify this?)
If they could connect could someone give me a link to an old compatible qtek firmware (i am sorta new to this and not sure which one would work)
Thank you.
WRT54GX4 no conect Wifi to Wiza200
Hi
same problem,,,,I had MDA Wiza200 T-Mobile,,version 2.26
my phone connect wifi to any router,but my router WRT54GX4 not connect,,,phone say my router name AVAILBE,,then I click to connect 3 second it says unavailbe then 3 second it says availbe,,,,the router WRT54GX4 I use all PCpocket,notebook,,okie,,,
if some one get same problem,,then fixed it,,please share to us
thank you
I call to Linksys support ,,they on phone with me 2 hours,,with 3 technicians,,but they give up,,,
lots of people have issues with linksucks and these phones... ditch the linksucks and get a better router
Hi, I hope someone can help me. I have a Belkin Wireless G router and an Orange SPV M600. I have tried to connect my SPV to the router with mixed results. If I disable my WPA-PSK I can connect with no problems in both B and G, as soon as I re-secure the router my SPV won't connect. I have ensured that the PSK is correct and tried the speeds at only B and only G. In the menu it says that my network is available then after 2 attempts to connect it then says that the network is unavailable. As you can appreciate I don't want to run my router unsecured.
All advise gratefully received
Rolfecat
Hi,
Do you have the same problem with an other device like a laptop ? You may have a problem with you router ?
try using wep or mac filtering or both, both are very reliable. i have had mixed results with WPA on mobile devices (and printers).
I have ran into this problem as well. I have a Netgear WNR834B router ("N" router). I have to set it to b/g in order for my 8525 to connect. Otherwise, it just sits there for awhile saying it's connecting and then gives the same unavailability error.
Hmm.did you find a solution?
Hi,
I haven't resolved the problem with my router. The router works fine with laptops and only my phone won't connect. The interesting thing is, when I go to other peoples houses where they run wi-fi I don't have a problem connecting even with WPA. Thanks for the replies, hopefully someone will turn up with a solution.
in wizard
Others have had the same problem and solved here,
http://forum.xda-developers.com/showthread.php?t=255724
I have been unable to fix with my wanadoo router though.
I just got a "new" T-Mobile MDA Vario (UK), and after starting it, everything seems to work fine.
But when trying to connect to wireless networks, it finds them okay, but never connects to them. It just alternates between "Connecting" and "Available" in the network list.
My laptop and the other PC in the house connects to our and other WiFi networks fine, so it must be a problem with the Vario.
I've tried a factory reset with the same results.
Any suggestions what might be wrong or what might fix it?
The OS is apparently 1.3.2.2 if that helps.
Thanks in advance!
had this a couple of times. my work router here worked fine after i rebooted the router.
but some networks i havent been able to get on to.
What encryption is your wireless access point/router running? and what brand is it?
Thanks for the reply.
It's a Linksys router, using a WEP security pass, but it won't connect to other branded routers either (local unprotected neighbourhoods ones (A Belkin, for example) that the laptop and PC can connect to just fine).
With the old XDA Mini S I used to use, it connected to the network fine then asked for the WEP Key, but this one just never connects. I've tried going into the network info and putting in the WEP Key, and it stores it and gives no 'Wrong Password" error, but still never connects.
I've upgraded the ROM to the latest official T-Mobile one (2.21.2.6 WWE) to see if that would help, but I still have the same issue.
Is switching to the I-Mate K-Jam or O2 XDA Mini S ROM simply a matter of installing it the same way I would a T-Mobile ROM update, or will that brick the phone?
My old XDA Mini S never had this issue, and I've read of a few people using the MDA Vario having the same problem, so I'm assuming it's a problem with the T-Mobile ROMs/software?
Bump.
Anyone got any ideas/suggestions?
Thanks in advance.
I am having the same problem. I downloaded the lastest upgrade from the T-mobile site and was still not able to connect to the internet with wifi.
And suggestions would be greatly appreciated
I tryed with T-mobile 2.26 ROM. I like to connect to my desktop pc, with ad-hoc mode. As I remember, I could connect, but the PDA didn't accept the IP address and other network settings, that provided the dhcp server. (WinXP internet connection sharing) I checked this with vxUTIL. Connection didn't work even if I setup the IP address, gateway, and DNS server manually.
I upgraded to WM6 and now the thing work well.
I've the same issue, but also noted that the device already connects to dlink routers, linksys ones's didn't work, previously with the original ROM from CINGULAR 8125 the linksys worked fine now they don't.... i recently upgraded my phone to wizard love for G4's so it's not only a tmobile issue.
hello im new to the 8125 so bear with me. i have tried every which way to connect to wifi i dont have a sim in my phone i just want to use the 8125 as a PDA only using wifi as my primary connection means. i have WPA-PSK[TKIP] set up on my router my router is a 802.11g i did the registery hack in my device to g instead of b, it says connected but i cannot do anything like email or web. i have tried searching google but everything i have found has not worked my old tmobile SDA never gave me problems connecting to my router, other than it being unlocked. would unlocking my 8125 help with my wifi problem ?
Just pulled my SIM card out of my 8125 and Getting to the web was no problem so thats not the issue with yours. My 8125 is unlocked but not sure if thats your problem.Good luck
No answer from Wizard forum - trying here?
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2
emaj2 said:
No answer from Wizard forum - trying here?
Hi, I replaced my zyxel wireless modem router with a new Belkin N1 wireless modem router.
I configured the belkin with same wep details as old router. My wireless music steaming devide, my laptop and my Wii all connected right away - no problems - so I know the wep key etc is entered ok. BUT my phone will no longer connect.
My phone does connect ot the wireless network in my work place.
I rebooted the phone, no joy! Reset it, no joy!
I switched off the belkin and put the zyxel back on, and it connects at home.
I tried switching the belkin to broadcast G, no joy!
When I try to get it to connect to the network it shows all gren bars - so the signal is strong.
I dont use mac filtering.
Out of ideas - anybody know a solution?
Qtek 9100, win mobile 5, aku2
Click to expand...
Click to collapse
Can you find IP Qtek in Belkin.
But have you tweaked QTEK to G?
Hi,
No, can't see qtek IP in belkin.
Tweaked to G? - I did'nt do anything like this. do I need to? How?
I was assuming the qtek was picking up the old router via G.
Answer is in this link...
http://forum.xda-developers.com/showthread.php?p=2941902#post2941902