Hi to the list,
This message is addressed to the italian guys maybe also someone else can give me an hand.
I ma using a qtek 9000 with a dual sima and the Sim Status Switcher program.
I use them with an Italian sim TIM 128k and an italian SIM WIND 64k.
All seem to work perfectly but i have only one strange problem:
Whe i am on Tim i can read on the Sim Status Switcher:
READY:338*******
OPERATOR: UMTS TIM (HOME)
while when i am on Wind i can read on the Sim Status Switcher :
Invalid or missing SIM
Operator: N/A.
Why this?
Anybody can tell me why when on the Wind i have this information and not as the Tim one?
I am sure that the Wind sim works perfectly because i can receive and send calls without problems.
Thanks in advance for any help that will be really appreciated.
Enzo
Hi
Could you post links to where 'dual sim' and 'sim switcher' can be obtained?
Hi,
The dual sim i got it on Ebay.
For the Software the address is:
www.wivit.com
Enzo
Related
I ask because my Exec was unlocked in the UK for O2 and Orange, then I updated the ROM and sold it to someone in Australia (Melbourne), who says they get an 'Invalid SIM Card' error.
Anyone who's Exec *was* unlocked, and who has installed the update, please report
Just tried an Orange sim in my Exec, I have done the ROM upgrade and the Orange sim works fine, so I can confirm that the new ROM does NOT lock the Exec
Regards
The XDA Exec is a bit finiky about SIM's
I have had problems with an older SIM card from T-Mobile USA (16k version), taken from a Motorola V300 gives Invalid SIM Message,
Yet a newer sim from T--Mobile USA from a Sidekick2, (32k Version SIM), works fine in the XDA Exec
So I think you need to tell your buyer that he needs to get a newer sim from his Cellco, Most Cell Companies will supply an updated sim for modern phones if the old sim is not supported, it will not mean any changes in number etc!
Hope that helps
Richard
Hi all,
I'm seeing this strange thing. I have received a Qtek 2020, and I tried to use it with my sim (TIM, Italian Telecom) but I can't see network service, under any circumnstance. Then I swapped my sim card with a Vodafone IT one, and I've seen full signal immediately. Trying to change to another operator like Italian "Wind", took me just as the very 1st step: no signal at all. I tried to change radio rom/os rom, and running unlock tools (they said it's all unlocked). Nothing changed.
Anyone can help me?
Thanks in advance!
Marco
mk_bulgarion said:
Hi all,
I'm seeing this strange thing. I have received a Qtek 2020, and I tried to use it with my sim (TIM, Italian Telecom) but I can't see network service, under any circumnstance. Then I swapped my sim card with a Vodafone IT one, and I've seen full signal immediately. Trying to change to another operator like Italian "Wind", took me just as the very 1st step: no signal at all. I tried to change radio rom/os rom, and running unlock tools (they said it's all unlocked). Nothing changed.
Anyone can help me?
Thanks in advance!
Marco
Click to expand...
Click to collapse
Wich radio version is in the mda ????
Try updating it to the latest version seeupgrading part
Hi, thanks for the reply (i was away for holidays )
I've tried *all* of the Radio ROMs for the device (found on buzz's site). Also for the OS rom and extended, when in 2003. Just don't know what else to do!
some older sims are incompatible
some people have reported success with
getting their operator sending them a newer
sim
Already tried!
It seems that works with the old ones as well as with the new ones (my sister has a 6-years-old card from Vodafone, and it WORKS!), but just from that vendor.
I'll just drop it in a trash can!
Hi All,
After the original contract with the carrier expired, I have unlocked my Qtek A9100 G4 with the IPL 2.21.0001 / SPL 2.21.olip, and was able to install an newer OS (WM6 Pro vs. the WM5 AKU2 that came originally).
Works fine with the original movistar chip, however when I try put in an Claro chip from one of my data cards, the Qtek opens the "SIM Lock" program and sends the following message: "Network is locked. Please input unlock code."
I have introduced the PIN of the Claro chip (movistar opens without asking for anything) but that's not the information it asks. The Claro chip works fine in the Huawei E226 USB card, without asking for anything.
I would like to discuss what information is being requested. Should I make additional unlock procedures? Who should provide the code? Claro or movistar.
Movistar operates locally in the cellular band (850 MHz), Claro operates PCS (1900 MHz). I'm in Peru. The movistar chip is an 128 kb version, the Claro is an 64 kb chip.
Thanks in advance for any information.
The Loco.
PS.
I ran the lokiwiz program, which showed the code.
http://forum.xda-developers.com/showthread.php?t=265928
just see my signature and use inbuilt search,
regards
irm
Thanks 4irm,
I have unlocked the phone already. The issue now is the data configuration:
- The local operators express their configuration with both: the number *99# (apparently it's the same number for movistar and claro) and the Access Point Name / APN (which is movistar.pe or claro.pe respectively).
- The network wizard doesn't include the information for Peru.
- When I set a new connection, it asks for the number, but it doesn't allow to introduce the APN anywhere.
So far, I'm using the Network Wizard choosing Spain as the country and operator movistar, which auto-configures the device and later allows to introduce the APN (but not the number) and in that way the data connection works for both movistar and Claro.
However, I'm wondering what number is being called and if there is a better way to do this. I would appreciate any information about how to configure both, the number and the APN for the data connection.
Best Regards,
The Loco.
htc hd2 leo
need network unlock code jamaica
Hello all,
I have a sim detection error with my french Sim
I come back from Cholydays in croatia. I did use during my trip a Croatian Sim prepaid. Every thing is ok in croatia, but when i came back in france, my french sim did not been detected by S4.
I try:
free, Sosh Sim and no sim detected.
Old croatian prepaid sim is well detected and roaming network is OK
french prepaid sim ' SIMA Mobile, network is OK
I have already try last stock ROM (I9505XXUHOH2) by ODIN
I have already try CM12/13
Did you have an idea of what could be my problem ?
Thank a lot in advance
Maybe the French sim card is damaged? Did you the French sim card in another phone?
Or your SIM tray got damaged by the Croatian SIM.
Maybe it was a bit larger than your French SIM.
Try applying some pressure to it and see if it is detected.
I try the french Sim in other phone.. every thing is ok
S4 seems to be blocked only with sim like sosh, free....
Prepaid sim like vip.me (croatia), or Syma Mobile (french) is detected by phone.
I give pressure on the sim...and nothing else
I'getting Mad
Good day. My friend bought a sm-j530f from Germany. On the box is writing "only EU sim". Here in Russia is asking for a sim pin, with russian sim card. Any solution how to unlock the phone and can work with russian sim card? Was installed different software with Odin from sammobile.com. But did not help. Also, with german sim card in roaming here in Russia, was make a phone call in Germany for 10 min, but also did not help. Thanks in advance