hello there,
it seems that i have a big problem,my imate jam (which i love very much) fell down and wont ever show te display again when switched on can anyone pls help me out with it as i love my phone very much and cannot bear without it,can pls anyone tell me what i need to do now.......
Can you put it into Boot loader mode?
Related
Hi all,
first off all i'd like to say Hi to everyone as im new here.
Also id like to thank everyone for readingmy problems
Any way i purchased an XDA II about a Week ago from Ebay its really my fault as in the item description it said there was a problem with the phone it wont start as its locked.
The phone goes to a Blue screen after you ON it and do the screen configiration etc
The blue screen has Cognito on it saying 'Warning this Devcie is Locked'
then under it:
'If you are installing from the MMC card please wait.
Otherwise, either insert the MMC card and do a cold boot, or contact Cognito to unlock the device.
Im not sure what this means and if i leave the phone for a while or type it from it takes me to a password screen in white with the keyboard on it.
----
Im not sure what to do if you can help me you will save me alot of money otherwise do i just chuck the phone away also
ive tried a Hard Reset by clicking the POWER BUTTON, RESET KET.
nothing happens just the phone loads up and makes me Calibrate the screen.
Ive tried this process while also pressing the D-PAD i get a screen with Serial with V1.06 i think at the bottom
i dont really know how i can know if its Hard resetted.
So please peolple take a Minute to help me thanks alot.
may work not too sure though
hey man i feel sorry for you
okay wot u do is download the o2 rom for the device because u sed it is a xda2 so download and install that. this will do a comlpete rest not like hard reset it will deleted absolutly everything on the xda2 and then install indows 2003 back onto it it will be like getting a new fone. try it i hope it works for u
HI
Thank you so much.
For your Advice and Time.
can you confirm this will remove that Lock thing ?
Also do you know where i can download Win2003 for XDA II o2 UK
Thank again
Hi,
I flashed the himalaya M1000 with WM2003se upgrade. but still could not remove the Cognito (shame).
please if somebody can help that would b nice
Should do. I've done the 1.72 update on it based on the ROM from this site and all is good.
hi guys
well i have a quite serious problem with my 8125
cpl of days ago my 8125 screen started disaligning and I couldnt stand it anymore... it would disaling after 10sec and I was mad about it
so i made a backup of main memory and decided to to a hard reset..
after hard reset, I got the WM screen and needed to tap the screen, I did the first two corners but after those i couldnt tap anymore, the touchscreen wouldnt feel anything.. so i softreseted it and got back to the WM screen and that alignement but this time it wouldnt feel anything- i stuck on the first screen..
okay, I thought maybe its a ROM fault (I use molski rom 2.26.10.2 with aku 2.3) and I tried to load it in bootload.. believe what, I found out that fuxing M$ made xda ROM archive down.. i went mad...
so i couldnt update my rom
than yesterday after reading sites and sites over net, I decided to open my wizard and try cleaning it, I did that, put cover back and all that stuff... and now my pc doesnt recognize the wiz when I connect it in bootload mode on AS
okay, so I don't know what to do, im out of ideas and I beg sum1 for help...
I got my 8125 from eBay last August and till cpl of days ago it was working perfectly.. Im not from USA btw.. ill try to send it to a diagnostic service in HTC in my country... but is there any other possibility?? would changing the touchscreen solve my problem?
plz help me...
The bootloader does not work with active sync, i think.
Active Sync requires to dialog with Windows Mobile, and the bootloader just has the basic code to make a simple USB conection.
You can probably use the Wizard Love ROM, which works great with any Wizard (even G4), and upgrade from there to any other version.
Notice that Wizard Love does not use ActiveSync at all, it downloads the rom through USB without active sync.
Please excuse my english, im spanish
can u plz PM with the link for the Love ROM download? thx
I've been happily using my wizard for past 3 months after buying it 2nd hand from another forum
However, today the power/standby button has broke
Dunno why - no obvious reason, but it is and now I can't use it - unless anyone knows different?
Once it goes into standby mode I can't get it on again
So, please, please, please, can anyone fix it or help me fix it please?
Or any other advice?
thank you for reading
nicojo
Hello Gays:
I don't Konw if anyome of you have the follow trouble:
When I put my xperia en the case some times I take it to answer a phone call and the screens apper in landscape mode ... I try to find out for severals weeks what was the problem until today that a friend told if is not a problem with the iman of the case ... Eureka ... that was the problem....
I really can understand why the phone has this problem .... and I would like to Know if someone heard about that and what's iot mean.
Thx a lot again.
BR
The Maxx
A simple guess, but does your case have a magnet in it? If so, Google X1 Magnet and you'll find out why.
sfreirez said:
Hello Gays:
Click to expand...
Click to collapse
Not all of us are
But yes if the case has a magnet in it will cause some problems with screen changing to landscape and waking up etc
Tin.
sfreirez said:
Hello Gays:
I don't Konw if anyome of you have the follow trouble:
When I put my xperia en the case some times I take it to answer a phone call and the screens apper in landscape mode ... I try to find out for severals weeks what was the problem until today that a friend told if is not a problem with the iman of the case ... Eureka ... that was the problem....
I really can understand why the phone has this problem .... and I would like to Know if someone heard about that and what's iot mean.
Thx a lot again.
BR
The Maxx
Click to expand...
Click to collapse
Sorry .. my mistake ... is Hello Guys .... "GUYS" .... The Case most have an magneto ... but all the letter case like the one I have ... has a magneto for close the case ... I will tried with other that have a magneto to check if has the same problem .... maybe thats the reason because the Case of the TyTN II don't have iman in the case????
Well I'll searching in the Web some case similars.
BR
The Maxx
hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.