Vodafone ROM and MSN - JASJAR, XDA Exec, MDA Pro General

I think I've tried just about every ROM now, except for VF which I've put on this evening (with a higher radio). I must admit it feels good and I'm very impressed...apart from MSN.
Does anyone know whether it's locked out by way of extended rom cab or if it's hard coded into the build? If it's not hardcoded, is anyone aware of which cab is causing it? I've searched everywhere but cannot get an answer other than 'go to the t-mobile rom', which is what I've just come off.
Cheers
Ant

Answered my own question...seems that they've taken it straight out of the ROM - leaving only a web link in Programs.
It's such a stupid decision for VF to take, regardless of their own plans for an IM client.
Cheers
Ant

Managed to get 'round' this issue by:
1) Reverting to T-Mobile ROM
2) Copying all related MSN files from \Windows (can't remember the exact names as I'm not at the home PC now)
3) Reflashed onto the VF ROM. I don't have a A2DP headset and I have an issue with the 'G' icon which shows as not connected (yet 'U' is fine) til I connect then disconnect from GPRS. Plus I like the look of the whole VF ROM.
4) Install the pay version of MSN from Windows Mobile website, opened it but did not activate it
5) Copied over the MSN files from the T-Mobile version into \Windows
6) Soft reset
When trying again to load MSN, works as usual without the 'you must activate' messages.
Just in case anyone needed that info.
Cheers
Ant

Related

BlackBerry Connect (BBConnect) for Wizard (T-Mobile MDA)

Hi,
Maybe I am beating a dead horse but could somebody please help me with these questions about BBConect.
Device: T-Mobile MDA with ROM version 2.26.x
Questions:
1. What are the advantages of using BBConnect (other than receiving emails from BB Servers)
2. Where does it write emails to (Outlook Inbox or any designated folder)?
3. If I use BBConect can I still use ActiveSync to synchronize with other Outlook Inbox folders?
4. I have seen somewhere that the WAP proxy needs to be changed: How does it affect other apps like T-Zones? Can I still connect to the Internet using GPRS?
5. How easy is it to install, configure & operate BBConnect?
Also if somebody could give a step-by-step install guide (all pdfs I downloaded are not in English), that will really help out.
Thanks in advance.
Before answering, I can tell you that rom 2.26 and the current BB connect client do not work. You will have to use a different rom. For me, based on postings on teh forum, qtek 2.17 and cingular radio 2.25 work well.
Now to your questions:
1. What are the advantages of using BBConnect (other than receiving emails from BB Servers)
replacement for bberry service and device. if your company has a BES server, you can now use your MDA to get corpoarte email. (I do not believe it works with blackberry internet service)
2. Where does it write emails to (Outlook Inbox or any designated folder)?
designated folder
3. If I use BBConect can I still use ActiveSync to synchronize with other Outlook Inbox folders?
yes
4. I have seen somewhere that the WAP proxy needs to be changed: How does it affect other apps like T-Zones? Can I still connect to the Internet using GPRS?
yes. BBerry will use a different connection. My MDA deals pretty well with switching from one connection to teh other (automatically)
5. How easy is it to install, configure & operate BBConnect?
if you have the right ROM, pretty easy. see the other posts on teh forum. But you can't6 use rom 2.26 yet.
Thanks for the answers.
I guess I will wait for T-Mobile to update the ROM.
I am not against running other ROMs, it is just that I have bricked couple of devices and wasted too much time to get the data back.
-G
Is there any option to have blackberry and MSN Messenger simultaneusly connected?
not really: they use different GPRS access point.
I know this thread is dead for some time, but I would like to get ne1fl0w5 wave here.
I have a Qtek 9100 from Claro (Telmex Brazilian sub). It was running 2.22.17.1 PTB ROM and 2.46.11 radio rom. First tried all BBConnect clients available (they were many). All installed but would halt at "Not connected" after first provisioning of the device and connection through GPRS/EDGE. After duly CIDunlocking the Qtek at imei-check (mine is a G4, I forgot to mention), I took a deep breath and decided to give it Vodafone's ROM a shoot.
I followed these instructions and managed to make it work.
Now, to your questions:
Questions:
1. What are the advantages of using BBConnect (other than receiving emails from BB Servers)
First of all, I have to say that I find (or thought, at first) BB email services excelent, but the devices really bad. Those little keys are small even for my 9-month old baby. Besides that, that trackwheel will certainly cause repetitive stress injuries. I used for less than a day and my arm started aking (please, don't say I am fragile) In addition, it was not made for lefties such as me. And the 8700g does not have an efficient cursor (for instance, if you are to delete a letter in the beggining of a line (or two words before the cursor), you would have to delete everything and retype the text.
For those reasons, I prefer the Qtek...
As per the system itself, I have to say that emails are delivered really fast to each of them. In Blackberry connect, the calendar items are also syncronized correctly as well. However, it did not sync my contacts (and it is probably not meant to), as opposed to the Blackberry device, in which both were available.
2. Where does it write emails to (Outlook Inbox or any designated folder)?
Designated folder. You can chose which server folders you want sync'd as well.
3. If I use BBConect can I still use ActiveSync to synchronize with other Outlook Inbox folders?
Yes. However, BBConnect uses a dedicated GPRS connection and it will compete with Outlook for the radio. You will probably have issues if you are looking for concurrent exchange push functionality.
4. I have seen somewhere that the WAP proxy needs to be changed: How does it affect other apps like T-Zones? Can I still connect to the Internet using GPRS?
Whenever you connect to do anything else, your BB connection will be lost.
5. How easy is it to install, configure & operate BBConnect?
It was hard to install all Roms required to make it work, but once you have this part finished, it is very easy to get things going.
Also if somebody could give a step-by-step install guide (all pdfs I downloaded are not in English), that will really help out.
The post above gives you all the directions (except for creating the blackberry.net connection, which is not necessary).
Sorry for the lenghty (and completely out of time) post, but I would like to share this with you.
Also, I would like to say that I was not very impressed with the way things eventually got working. first thing I noticed was that the reconciliation with the server was not complete. For instance, read messages did not display as such at my server, only at the device. In addition, the BB service uses lots of storage and memory.
In the end, I prefered my Qtek 2.22 rom (much faster to load) and much better loking style. Because of all this, I have just reverted to Qtek's rom and decided to go with email redirection to an external exchange sp2 account. Although we have that in the office, they have high security standards (but forgot to prevent email redirections).
Rafael K
BB Connect on WM6
Blackberry is running smoothly in Universal with WM6 Rom all thanks to c0rnholio. He figured out a way to change the string that will work through decoding>changing>encoding and flashing and finally a small aku registry change.
I was wondering if same thing can be done with wizard.
Here is how-to from c0rnholio
I managed quite easy to get BB Connect running (for company email via BES).
I had the 2.24 (Mr Clean) OS ROM, 2.24 Bootloaders and 2.25.11 Congular Radio. I knew that would not support BB.
I took the OS and ExtROM from the QTek 2.17 package, changed the pagepool to 8MB (BB was said to be a memory consumer), repacked them to a new nk.nbf (with only OS and ExtROM), upgraded, installed BB Connect 2.1.2.31 (downloaded from the Vodafone.de website) and voila!
By just following the Blackberry Connect tutorial (also downloaded from vodafone.de) I had it going.
Good to know:
-I did this exercise after I received my Blackberry device from my employer (I was happy with the functionality, not with the device). So I was sure that the BB functionality was Ok for my company email account.
-When I generated the key for my PDA PIN the Blackberry device was no longer functional (I can think of reasons why).
-I did not have to use the SIM I have in the Blackberry device, in my PDA I am still using my Voice SIM (which also has a data plan)
Hi
I'm also working on getting BBconnect to work with the newer roms. I managed to get it to work with the latest Tmobile rom 2.26. But Crossbow still no luck.
I looked at the solution for changing the strings, but unfortunatly the strings mentioned are not in the crossbow rom...so can't change them (I guess they're different?).
I have contacted Faria; he seems to have a way to tweak the system so that it will work. He's currently on holiday but as soon as I have some info I'll post it here.
Did you try to get it to work on the latest aku3.3 rom?
now works
I've got it now working on all roms...including Crossbow. There is a detailled explanation in the developing forum that shows how to change the rom for BBconnect to work.
Is there an easy way to do this?
I am not a complete newbie, but I am certainly no expert in hex editing, so I was wondering if there is an wasy way to make it work on other Wizard ROMs, including the Brazilian provider I am hooked with.
Currently I am using Tmo's ROM, but there are a lot of features in this ROM I do not use and that take lots of space...
Thanks
Hacking isnt that difficult, it's just that you need to understand how it works.
The thread in Development & Hacking says it all.
I think (just have to dare to flash the hacked os now!) I managed to hack the official AKU3.3 WWE ROM.

Dopod released Blackberry PPC Client

I was on the Dopod AUS site earlier and noticed that along with a number of other Apps & Games that Dopod have released a version of Blackberry Connect 4.0 for PPC along with the ActiveSync BBConnect Desktop Setup application.
I dont use it myself but as i have only seen version 2.x around here i thought i would upload it so someone could check it out. The files included in the zip file are:
ActiveSync_BBConnect_Desktop_Setup_4.0.0.17.exe
bbconnect_pocketpc_bb_4[1].0.0.67.cab
bbconnect_pocketpc_bb_4[1].0.0.67.exe
BBCWM Quick Start Provisioning Guide.pdf
BlackBerry Connect 4.0 ppc user guide english.pdf
They do also specifically mention its for WM5 however with their WM6 release pending who knows it may work on WM6 as well. Heres the link to download from Megaupload: http://www.megaupload.com/?d=GBSZ8FQH
Filesize: 24.19 MB
Cheers!
(and yes i know i misspelled Dopod in the title but it wouldnt let me go back and edit the post title :S)
thanks a lot for posting this one....yummy...going to try it on my 8525
Its very kind of you to share this. I am downloading it now. I thought that the Nokia E90 would be the first device to use BBC 4 but looks like Dopod beat them to it. Will install in on my Dopod 838 pro. They have not post it on the Asia site. Glad you manage to download it first as it may have been accidently been leaked. Lets see what BBC 4 have in store.
Once again thank you very much.
works on black 2.0
Well, I just installed on my 8525 running Black 2.0 WM6 version (I am on Cingular USA)....It seems to work fine with my BES and BIS emails...I love that it now syncs contacts, tasks and notes as well....Great!
Can't get the client to connect on Treo 750.
Any suggestions?
I called Cingular and told them I wanted Blackberry connect.
YES! Finally. REAL Blackberry on the PPC. I'm using mine with WM6 Black 2.0 and it works perfectly! Sync Contacts, Tasks and Notes now along with being able to do Enterprise Activation! Now I have no need to keep my RIM device around!
pin to pin
i imagine there still is no pin to pin yet so not really quite bb yet but gettin there, needs pin 2 pin then will be complete. but then maybe there is i could only hope.
This only works with blackberry sim and data plan right??
leoiden said:
This only works with blackberry sim and data plan right??
Click to expand...
Click to collapse
Correct!
A
pvenkat said:
I love that it now syncs contacts, tasks and notes as well....Great!
Click to expand...
Click to collapse
So besides the ability for our coporate Lotus Notes / BES admins to enforce policies, make me enter password every hour, shut my PPC down , enterprise activation, syncing contacts, tasks and notes and to view picture attachments what would be another appealing reason for me to upgrade from BBC 2.X ?
Have anyone installed BBC 4.0 on LVSW 0429 ROM or Black 2.5 ROM yet ?
TIA
well
i tried it on my universal running wm6
and god i got stuck on boot screen and even a hard reset not working for me
anyone please help!!!!!!!!!!!!!!!!!!!!
I have been running BB Connect 2.blah.blah.54 for some time so it took me almost 6 installs on my Jasjam before the installation worked. Each previous time it installed and then uninstalled itself. I ended up having to copy the .CAB to my memorycard and then installed/reboot, installed/reboot until it stuck.
My company runs a BES and, using the desktop client, I was up and running in no time at all.
And why, you may ask, would I want to upgrade to all that security???
Because my carrier meters internet data separately to blackberry data and BB Connect 2 did not include a browser. So now I have a FREE!!!! browser access, not only to the internet, but my corporate network as well.
I hate to shout but...THANKYOU SO MUCH FOR POSTING
I'm having issues installing the desktop application. It installs all the way through (I even see the files in the destination directory for a split second) after which everything is removed again..... No clue what that is about. Tried to unpack the .msi file within the installer but no luck.
So I can't activate the client through my PC/Network.
Tried wireless OTA activation instead, where you have to enter your mail address and a password. You see two e-mails being sent by the device/rim server that are used for the activiation but the device doesn't seem to activate. Could it be the password needed for activation is different from the exchange password?
Strange.
It must not like the Treo 750's ROM.
I have tried 2 different SIMs both out of Blackberry 7290s. One from Cingular and one out of a T-Mobile device.
I'm stumped. It goes from "Network Available" to Data Tunnel Found" to "Not Connected".
Update: Tried the Vodafone ROM too with no luck.
Blackberry connect and browser
Managed to get the BB Connect 4.0 version running on the Black 2.0 build. AN earlier poster commented on getting the blackbeery browser to work. I did not seem to get any browser applicvation installed, do I need to do some additional config to get this up and running. I thin kI have all the service books listed.
Any help much appreciated
Thanks
Andy
danielalvers said:
I have been running BB Connect 2.blah.blah.54 for some time so it took me almost 6 installs on my Jasjam before the installation worked. Each previous time it installed and then uninstalled itself. I ended up having to copy the .CAB to my memorycard and then installed/reboot, installed/reboot until it stuck.
Click to expand...
Click to collapse
Me too, but even when it appears to install properly, I can't find it in programs or settings. The 2.xx.xx versions always put a shortcut in System Settings.
Any suggestions? I'm running Black 2.0 (WM6).
Edit: Never mind, it seems to be working now!
After installation there was a Blackberry icon in the settings. This needed to be run first for initial config. After that I had a blackberry icon in my programs list that contains a browser link.
duh.., cannot download from megaupload.
anyone willing to put it to rapidshare..?
thanx in advance!
(new user of 838pro)
d1eter said:
duh.., cannot download from megaupload.
anyone willing to put it to rapidshare..?
thanx in advance!
(new user of 838pro)
Click to expand...
Click to collapse
Here you go..............
http://rapidshare.com/files/29213009/BlackBerry_Connect_4.0_Setup_files.zip.html
thanx a lot !

T-Mobile Internet, Working Apps (IM)?

OK so I am new here, but I am not new to mobile devices at all. In fact I was a Mobility Admin in different forums. So please don't get mad at me for posting here. I have some questions. PLEASE don't play the FLAME the noob game. I swear that I searched far and Wide for my answers but have failed to find them.
So my question: is there anyway to tweak the T-Mobile T-zones Internet?
I can:
Connect to the internet
Download Files
Stream Music (orb)
Stream Video (badly[orb])
Use Google Maps
I can't:
Connect To IM servers, I have tried all of the programs. OZ for T-Mo is the only one that works, but it's horrible.
No YouTube, I can live without this but I hope to get it working.
MIDP can't connect.
Basicly nothing, that doesn't connect from, IE works.
----------------------------------------------------
I have played with the Proxy settings and nothing. I know that with my Treo 650 I could connect through VeriChat, but I can't connect on WM6.
Is there a program out there that can help me fix this?
Again I'm sorry if this is a repost, or an overkill of something, but I want to get this stuff working.
Thanks
-CD85233
I do not have an obvious solution but have also seen plenty of similar comments here from others - not just with T-Mobile either. I am using T-Mobile in the UK and have none of your problems.
I obviously had the original T-Mobile Vario II build (WM5) but now have the Black MAJIK build with WM6 and all has been fine with both. Some people directly accuse T-Mobile of blocking their IM, but I have no issue with it - albeit I use it rarely. Of course it "may" be that T-mobile are indeed blocking some services to 'offenders' (IM is not allowed) but I wonder if their system is that capable.
Obvious questions for you are: what OS are you using? Have you changed ANY comms settings from the original T-Mobile build? Have you tried a hard reset to restore original settings (including the all important T-Mobile extended ROM)?
If you still have the original OS ROM build running then you might try installing the configuration .cab files that are stored on the Extended ROM separately - some apply directly to such device settings. Access to that Extended ROM on the WM5 build is easy and you just need an application such as "HTweakC 2.0" (available here). Of course, and as ever, start with backing-up your device - but you will know that.
I hope this helps.
I have VSWL Rom.
I have setup the internet (GPRS) settins like they are suppose to be.
I believe that it is a fact that T-Mo has blocked ports, and has only left http smtp and pop3 open. So my dilema is why did verichat connect on my Treo 650 and not on my MDA or my 8525.
First we need to know if you are in tmobile usa, uk...????
if you are in tmo usa then you can't
if you have the proxies 216.155.165.50:8080 the most you can use is PIE (pocket internet explorer)
the best thing is to get the blackberry $20 dollar add-on plan and just setup without proxys. wap.voicestream.com and you have full internet access.
I am in the USA, and I have the T-zona 5.99 plan.
I am less than reluctant to close my mind for this not to work, since google maps works. and, as I said, on my Treo 650 using verichat worked perfectly.
I don't know what the difference in the way the Treo 650 connected and the way my 8525 connects.
Perhaps the programs that can connect are ones that ones that connect through port 80 and are proxied to 8080.
I am so lost on this topic though.
too many contractidicting points.
such as streamining works on win but not on palm
IM worked on Palm but on Win.

Blackberry Connect Works on XPERIA

So guys, I had a BB Bold and it fell and the screen broke. The next day I got the X1 as a gift and I was wondering what features I could put on it. The application that came to my mind was BB Connect and I went through this forum for hours got the application and installed it but I had the pin pending issue so i forgot all about it and got the BB Storm, fixed the BB bold and gave it to my girlfriend.
Recently my storm fell and the screen went bad so I went back to my X1 determined to fix it. Well, the R3A rom was just released so i updated my "vodafonised" x1. Just a note, the vodafone rom was crap. I'm in Nigeria and i could not do anything with it. i couldn't even hook it up to wifi. The GPRS settings were not configurable.
The R3A ROM is perfect. No vodafone crap, and I installed BB connect version 4 and it worked like a charm. I use the MTN Nigeria BIS service.
No Pin pending! The browser works perfect.
My advise, if you need to unleash the power of the x1 then you need to get the ROM fixed.
Please see links I used below.
OPTION A
The R3A ROM and update procedures can be found here
http://forum.xda-developers.com/showthread.php?t=446070
Note: The procedures above didn't work for me. So if you are having the same problems, please check out the procedures below.
OPTION B
R3A ROM here:
http://rapidshare.com/files/163578806/ruu_signed.zip
Update procedures here:
http://forum.xda-developers.com/showthread.php?t=445662
Option B worked for me like a charm
Blackberry Connect here:
http://www.sems.org/entry.asp?entry_id=276
I hope this helps someone.
Very interesting! First, I am new to Blackberry.
Blackberry Connect is an application for Windows Mobile which enables WinMo users to have Blackberry Service? Am I understanding this correctly?
If so, my friends which use and show off their Blackberries gonna be stunned!
can somebody confirm that is working ? We had an "almost running blackberry" thread in this forum.
Confirm: Working
Hi Guys,
It's finally working. When I installed versions .103, .92 and .90 I got the "pin pending" story. Drove me nuts.
I tried the Sems .106, and this works on R3A for me
I noticed that R1A and R2A have a device OS ID which is "HTC-Kovsky"
(this is different to what you can set in the "About", it is the ID embedded in the OS - you need a hex editor to change it, before flashing the OS file back to the phone. See here post 302: http://forum.xda-developers.com/showthread.php?t=294218)
R3A has a device id of SEMC-X1, and this seems to validate against the BB network and supplies a Pin to your device. I have read on SEMS comments that v.103 and previous don't work. So I reckon use .106..
Steps:
1) install .106
2) select sync options
3) install complete, restart
4) upon restart, connect to BB network
5) you might have to wait a few hours, because for me it connected, then disconnected, then after a few hours I went to the status tab in BBconnect, and clicked "disable" and then "enable" to kick start the connection again. Then after a few tense seconds it obtained the Pin..
Default Confirm: Working
Hi Guys,
It's finally working. When I installed versions .103, .92 and .90 I got the "pin pending" story. Drove me nuts.
I tried the Sems .106, and this works on R3A for me
I noticed that R1A and R2A have a device OS ID which is "HTC-Kovsky"
(this is different to what you can set in the "About", it is the ID embedded in the OS - you need a hex editor to change it, before flashing the OS file back to the phone. See here post 302: http://forum.xda-developers.com/showthread.php?t=294218)
R3A has a device id of SEMC-X1, and this seems to validate against the BB network and supplies a Pin to your device. I have read on SEMS comments that v.103 and previous don't work. So I reckon use .106..
Steps:
1) install .106
2) select sync options
3) install complete, restart
4) upon restart, connect to BB network
5) you might have to wait a few hours, because for me it connected, then disconnected, then after a few hours I went to the status tab in BBconnect, and clicked "disable" and then "enable" to kick start the connection again. Then after a few tense seconds it obtained the Pin..
Reply With Quote
I can also confirm that works!!!! Finaly...
Mailing works great, but i cant make to internet browse by bb connection. Any advice?
This is probably something related to the BIS Service - I can't use internet also, but at my company it's not enabled for our devices.
Sapa13 said:
Mailing works great, but i cant make to internet browse by bb connection. Any advice?
Click to expand...
Click to collapse
I do not see any reason why Internet browser should not work. If you are on the BIS package, you will have a new internet explorer specifically for your blackberry connect. It should be in the blackberry folder. I don't know anything about BES>
If you have access to your providers blackberry page, you can try resending your service books. That should send all your settings back to your phone.
netsurfz said:
Very interesting! First, I am new to Blackberry.
Blackberry Connect is an application for Windows Mobile which enables WinMo users to have Blackberry Service? Am I understanding this correctly?
If so, my friends which use and show off their Blackberries gonna be stunned!
Click to expand...
Click to collapse
Yes you are correct. It is for WinMo users.
Now you can show off your WinMo with BB capabilities to your friends and even greater apps.
raduci said:
can somebody confirm that is working ? We had an "almost running blackberry" thread in this forum.
Click to expand...
Click to collapse
Working !!!
damola said:
yes you are correct. It is for winmo users.
Now you can show off your winmo with bb capabilities to your friends and even greater apps.
Click to expand...
Click to collapse
thank you very much!
Calvin H said:
Hi Guys,
It's finally working. When I installed versions .103, .92 and .90 I got the "pin pending" story. Drove me nuts.
I tried the Sems .106, and this works on R3A for me
I noticed that R1A and R2A have a device OS ID which is "HTC-Kovsky"
(this is different to what you can set in the "About", it is the ID embedded in the OS - you need a hex editor to change it, before flashing the OS file back to the phone. See here post 302: http://forum.xda-developers.com/showthread.php?t=294218)
R3A has a device id of SEMC-X1, and this seems to validate against the BB network and supplies a Pin to your device. I have read on SEMS comments that v.103 and previous don't work. So I reckon use .106..
Steps:
1) install .106
2) select sync options
3) install complete, restart
4) upon restart, connect to BB network
5) you might have to wait a few hours, because for me it connected, then disconnected, then after a few hours I went to the status tab in BBconnect, and clicked "disable" and then "enable" to kick start the connection again. Then after a few tense seconds it obtained the Pin..
Click to expand...
Click to collapse
Hi,
but i dont see .106 in the list provided with the link. Should I look elsewhere? A link?
jorao said:
Hi,
but i dont see .106 in the list provided with the link. Should I look elsewhere? A link?
Click to expand...
Click to collapse
hi got it on the updated site. well i actually had to google it, and found it there:
http://www.sems.org/entry.asp?ENTRY_ID=338
http://www.sems.org/entry.asp?ENTRY_ID=338
btw,
1. Is it this particular version u guys are talking about?
2. Do i have to get my network activate blackberry service before i install it?
Sorry if these have already been discussed earlier, but those forums, it didnt work
BTW, i have tried, but havent got BB serv activated yet. I did noticed my phone was behaving weirdly, like screen will turn on at times, a bit slow. i finally removed it.i think it kwwp trying to connect to BB server or something.
Am using ITJE's rom ver 10.3, and device id is SEMC-X1.
cheers
Here it is...
http://www.sems.org/entry.asp?ENTRY_ID=338
By the way, my service provider explained that cannot use it for browsing.... There is in the BB folder BB browser but when i try to use it it opens Opera, and cant establish connection... Any way, mailing is my priority...
But one more thing, i have limited attachment only 60 kb?????
1. Is it this particular version u guys are talking about?
2. Do i have to get my network activate blackberry service before i install it?
!1. yes
2.yes
I had same problems until activated network service, and once when it establish connection and register with BB, everything back to normal...
I'm on custom rom R3A....
Sapa13 said:
1. Is it this particular version u guys are talking about?
2. Do i have to get my network activate blackberry service before i install it?
!1. yes
2.yes
I had same problems until activated network service, and once when it establish connection and register with BB, everything back to normal...
I'm on custom rom R3A....
Click to expand...
Click to collapse
thnx!!!!!! it works!!! i contacted orange uk first, they activated it. i reinstalled the bb connect ver 4.0.0.106 ... after abt 2 reboots, i got my pin no!!!
now the silly part ... is there bb messenger that i can use? i only managed to get my email working.
Will I be able to use Blackberry Messenger with BB Connect? Use PIN to text my friends such a thing.
Can someone make a tutorial for this application for newbie. And yeah same question does it mean we can get bbpin with this bbconnect program
I'm wondering also if once we obtain a BB Pin, could we then use BB messenger on our Xperias...this would finally allow me to mock all of my BB-lovin friends, as I would truly own the world
Installation is very simple. But be sure that you have new rom, on R2a and R1A want work.
Activate with your service provider BB service, download 4.0.0.106 cab from here http://www.sems.org/entry.asp?ENTRY_ID=338, install and wait until reeboot. In my case it immediately connected, but if not try to suspend then resume BB connection in BB folder that will be in bottom right corner on yzour today screen. And thats all folks. Other settings i did on internet site that my provider gave me. ( you can do it on the phone also BB folder-utility click on email settings)
thnx!!!!!! it works!!! i contacted orange uk first, they activated it. i reinstalled the bb connect ver 4.0.0.106 ... after abt 2 reboots, i got my pin no!!!
now the silly part ... is there bb messenger that i can use? i only managed to get my email working.
yes, go to programs folder,blackberry, inside is Internet browser.
and please, inform me do you have limitation on sending attachment, mine is only 60kb

BlackBerry Connect Working on Rhodium

I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
mate, u can just ask the mods to change the title of the other topic....
AirwolfUK said:
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
Click to expand...
Click to collapse
Thanks for your workaround and I managed to get my BB Connect working on my Touch Pro 2 and I am using BIS.
Blackberry Connect is Working on HTC TouchPro2
Dear All,
Rejoice HTC TouchPro2 owners. Blackberry connect for working on HTC Touchpro 2 now. Just follow http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35 this web-link and you will achieve your intentions.
Can't get it working for long on mine
I have followed the instructions given in the link, and can get BBConnect 106 to work on my TP2, but only for a while ...
The BBConnect 106 loads, I get BES connection, email, contacts, calendar, notes and tasks downloaded ... manage to send and receive a few email, then it all stop ... with some very strange behaviour.
I have tried everything I can think of to get it working consistently, but can't manage it. I get the impression that the BBConnect is being loaded some place where it should be ... not very technical I know, but thats the way it appears.
The TP2 I have is a Hong Kong English Language version ... WWE ... not sure if that makes a difference.
ROM and Radio version ...
The version I have on my TP2 are
ROM 1.19.721.3 (51489) WWE
Radio: 3.44.25.27
And to correct my typo in the previous note, I think the BBConnect is being loaded shmewhere it shouldn't be loaded, which is causing other features and functions of the phone to mis-behave ... as an example, I was unable to search for new networks manually ... lost the Roaming flag on the top of the screen (small triangle sign), was always displaying GPRS connection, even when not connected to the network (so E (edge), or G being displayed ...)
I also tried version 104 of the BBconnect, just to see if it was version 106 specific, but this didn't make a difference.
Apart from that, the phone is close to perfect, for me at least ... particularly like the way the screen blanks when you are making a call and put it close to your ear, then comes alive again when you move it away so you can see it and access it. With the TP, I was always putting calls on hold when I put the phone to my ear ... also like the way the speaker phone is activated automatically when you place the phone face down.
Now if I could only get BBConnect to work, it would be perfect
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
HeavyComponent said:
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
Click to expand...
Click to collapse
My company disables sync with Exchange and I can only get work email with Blackberry service. I think it's a common problem.
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
BB CONNECT Messenger?
Can BB Messenger be used with BB Connect?
Windows Mobile 6.5 and BlackBerry Connect
Guys, I would like to hear from someone who understands the 6.6 environment whether you think upgrading into WM 6.5 will allow me to still use the BBerry Connect. has anybody tried upgrading a Rhodium and then try the BBerry?
Quophi said:
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
Click to expand...
Click to collapse
rsacipher said:
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Click to expand...
Click to collapse
RSACIPHER: I had same problem. could not change Model ID. What is Memmaid and how did that work?
Also
C0RNHOLIO: maybe you should look into why this is happening so that your solution works all the time. Mine is a T-Mobile Rhodium.
Thanks to both
And what about a HTC Rhodium with WM 6.5? Try it but didn't get it.
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
AirwolfUK said:
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
Click to expand...
Click to collapse
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have been running BB on my TP2 on 6.1, 6.5 and 6.51 roms with Sense 2.1 and 2.5. They all work, and no, I cannot have multiple data streams so when I use the browser my BB connect shows no connection. If I disconnect data, sometimes BB automatically connects but generally I have to run BB connect, disconnect and reconnect (so I added a shortcut to it on my programs).
For me, using 6.51 and 2.1 gives the least trouble. I dont know why.
BTW I keep getting reminders that there is a new BB Desktop update (5.01).
good idea on adding the shortcut. I have found that it rarely reconnects and I had to turn off the auto update for the weather or I would start missing emails. I hope someone gets a fix for this soon as this is the perfect email phone...
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have two streams (BB & Contract Internet) running at the same time.
I am on UK Vodafone contract so that probably makes a difference
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
Having concurrent connections two 2 APNs simulatiously only works for GPRS (as far as I have observed on all my past and current devices).
So if you want to have BBC and Internet at the same time you need to switch to GPRS only and disable auto band switching for 3G. If anyone knows a way to get concurrent connections working on 3G, please post how.
EDIT: The infos in the follwing post should do the job:
http://forum.xda-developers.com/showpost.php?p=2382465&postcount=37

Categories

Resources