MMS configuration - 8125, K-JAM, P4300, MDA Vario General

can anyone tell me how to setup mms to send/receive ?
i am using vodafone.ro
i have the settings they gave me but it won't work ( no wonder ) .
to use mms u need a gprs connection and a mms one right?
does it matter where i make each connection?my isp or my work conn ?
i setup mms config in messages but when i try to send a mms it will save in drafts and when i receive one i get a notification and when i try to download it errors occurs.
something like : dialing mms.vodafone.ro please check if u'r phone is on and bla bla bla...
anyone?

Related

Possibly working MMS on Magneto

Hey all,
i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.
i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
try any of this three cab see which one will work for you
MMS
I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.
I have to soft-reset to get out of it as "Cancel" does not work.
Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ
I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toenailed,
Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?
Thanks
Sending is work perfectly, but the receive...
pixar 4
hello to all
i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error
i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc
help needed
thanks
toenailed said:
THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..
PS dont use local number coding instead use international Number coding
example
09173xxxxxx4 <- local
+639173xxxxx4 <-international
if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)
Click to expand...
Click to collapse
Toe,
Could you post your settings for Pixer4?
My settings are below and I cant seem to send nor receive..
Thanks..
hi jenellej.. just run the GPRS cab ..
under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings
for sun
"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"
for GLobe
"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"
for Smart
"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"
i already try the GLOBE and SUN .. but i havent try it with SMART yet
one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..
PS Dont install also ArcSoft MMS COmposer
I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!
still doenst work
can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol
gateway 213.30.27.63
url http://mms/servlets/mms
port 9201
After sending--- device Hang
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Re: After sending--- device Hang
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
for SMART (philippines):
here's the settings for Pixer..
Start/Settings/Connections/Connections
Click Advanced Tab, choose Select Networks
Under "Programs that automatically connect to the Internet should connect using:", click new.
Under General Tab:
Enter a name for these settings: Smart MMS
Under Modem Tab:
Tap new, enter a name for the connection, select "Cellular line (GPRS)" then tap next.
Access point name: mms
Click Next then Finish.
NOw open Pixer4.
Tap Options/Preferences/Advanced.
Wap Gateway IP Address:
10.102.61.46
MMS URL:
http://10.102.61.238:8002
Service:
Smart MMS
Click OK, check "Get Message Immediately" then OK.
for GLOBE and SUN settings, refer to toenailed's post above.
i was working on a cab with toenailed's help (thanks toe!!!), but i still can't get it to work. maybe later i'll figure it out when i'm not too busy. :wink:
I can send using Pixer4 on the Orange network. Not sure about receiving yet.
My Pixer4 settings:
Wap Gateway IP Address:
192.168.224.10
MMS URL:
http://mms.orange.co.uk
Service:
Orange MMS
works perfectly on sending MMS message (Etisalat) Operator & 1.5 WM but recieving is not working even when retrieve option is ticked, but that could be because of the workarounds am doing with MMS composer, am trying to replace the pop3 account in my inbox with MMS composer but no success so far :shock:
How abaut EzWAP MMS
i'm not try it yet but i thought it work.... :roll:
Re: After sending--- device Hang
mariolouis said:
muhelen said:
Hi, after I send the MMS using Pixer, the device just freeze. Any help? I'm using manual configuration for DiGi Malaysia.
Click to expand...
Click to collapse
it takes time for it to send. just wait for it. it will seem it hanged but in fact it isn't. it takes time on "authenticated-ok" but after a while, it goes on smoothly.
Click to expand...
Click to collapse
mariolouis, thanks for the explanation. It's really take time to send. Infact, I'm waiting more than 10 minutes, but still the same!
try this MMS Composser
this two cab must instaled
Re: try this MMS Composser
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Re: try this MMS Composser
jenellej said:
mwilmar said:
this two cab must instaled
Click to expand...
Click to collapse
Are these files the same ones with WM2003SE(Arcsoft?)? Or is the MMS Composer also Pixer?
Click to expand...
Click to collapse
Arcsoft MMS Composer 1.6

MMS Settings / MMS Composer

Hello,
i use Qtek9000 for 3 month, and till today i didnt worried about MMS because i never used. But today I had an idea to send an MMS message so I opened Messaging system, selected from MENU -> MMS Configuration and configured my QTEK with MMS parameters from Operator Site.
The problem that I experience is that after setting MMS I'm still no able to create an MMS, in Messagind didn't apear an account for MMS Messages.
Can someone explain me why? and maybe someone can upload an MMS Composer here. Maybe and update of my MMS Composer will solve the problem.
Thanks in advance,
SchumiX
no one can aswer my question?

How to set up o2 germany MMS with wm6???

I've read a lot on the o2online.de page. but i cant find the settings menu in wm6. sms and mms are using one menu-point, not like in wm5 2 different accounts in messaging menu. i hope someone can help me how to setup mms configuration that i can download/receive and send mms messages. my girlfriend tried to send me a mms, but there comes a hint that mms are saved in incoming (posteingang) till setup mms correctly. and i also had an error that i am in roaming and can't receive messages from there. but my internet is working perfectly, also the email accounts, msn and so on.
hope somebody can help me.
thx in advance
greet

MMS Settings on WM6

Hi,
I have a HTC Touch with WM6 on it and yesterday I received a SMS message about a MMS that I received.
I tried to figure out the settings for MMS through my provider (Vodafone NL), through google and through this great forum. Unfortunatly I am unable to find the settings for MMS anywhere in my device.
All the MMS guides say:
Go to messages, go to options and then edit your MMS settings.
Unfortunatly I dont see MMS settings but SMS/MMS settings and the only two options I have are "use unicode if needed" and "request deliveryreceipt".
Anybody can tell me how to configure MMS settings on my WM6 HTC Touch device?
Greetz,
Sander de Rijk
you must have the new mms app just go to sms/mms and make a new mms choose custom, go to the menu or what ever two settings are on the bottom and look for mms settings (sorry for lot being to detailed right now i dont have my phone with me)
hope this helps you in some way
I am sorry but I dont quite understand you.
I only have the option to create a new email account (pop3 or imap) and I cannot choose MMS.
What kind of MMS app do you mean? A seperate install? Or do you mean another message provider like exchange/MMS/pop3?
Sander_de_Rijk said:
I am sorry but I dont quite understand you.
I only have the option to create a new email account (pop3 or imap) and I cannot choose MMS.
What kind of MMS app do you mean? A seperate install? Or do you mean another message provider like exchange/MMS/pop3?
Click to expand...
Click to collapse
sorry as i sed i did not have my phone with me but now i do and the mms app is what sends mms because it is separated from the sms sender
My mms settings are in the sms inbox and select menu and mms settings
if not try these
go to your sms inbox select menu go to new and select mms. Choose custom now select menu > options > MMS options.
that works fine, but its the configuration for receiving MMS messages
I received a SMS message from my provider that I should watch the MMS online on some website. Why cant I get it on my device directly?
When I look at the info at the provider they say that I should configure some sort of mms url. But I cannot configure that anywhere.
or am I missing the complete picture of MMS receiving?
Sander_de_Rijk said:
that works fine, but its the configuration for receiving MMS messages
I received a SMS message from my provider that I should watch the MMS online on some website. Why cant I get it on my device directly?
When I look at the info at the provider they say that I should configure some sort of mms url. But I cannot configure that anywhere.
or am I missing the complete picture of MMS receiving?
Click to expand...
Click to collapse
this used to happen to my old motorola phone because the file was too big or it was not compatible (even that i knew it was) this is a network problem or try setting the size limit in the mms settings to the max you can on it but if you want higher try searching for the registry settings, search "mms size limit" or something like that
instead of all various configurations where I have to enter the URL of the MMS server it was quite easy: send an MMS and my provider automaticly configures my phone as MMS-capable

HTC HD2 MMS didnt work...

I was try couple cooked ROM and after accept automatic settings for home operater on the first start GPRS work without problem,
but MMS wont work
I have: "Downloading multimedia message..." for couple minutes
and then: "Unable to download message"
and same with sending MMS...
any solution for this issue?
just remove 0 from IP address in MMS settings and can use HTC messaging
for sample:
non working: 192.168.012.041
and 100% working: 192.168.12.41
help?
ok i have the htc hd 2 from tmobile, and my friend he has iphone from at&t.. its odd really..i cant send mms to him but i can send it to his email that works perfectly fine..but not to his iphone..but when he is like close beside me, i am able to send it to him to his iphone.. i can receive his picture message right away even if he is far away or up close..so what do i do?~ im able to send mms to my other friend that has tmobile fine except my at&t friend..
i've noticed that as well. Maybe there is a picture size limit on the iphone???
gmc_bh said:
I was try couple cooked ROM and after accept automatic settings for home operater on the first start GPRS work without problem,
but MMS wont work
I have: "Downloading multimedia message..." for couple minutes
and then: "Unable to download message"
and same with sending MMS...
any solution for this issue?
just remove 0 from IP address in MMS settings and can use HTC messaging
for sample:
non working: 192.168.012.041
and 100% working: 192.168.12.41
Click to expand...
Click to collapse
Where is the IP address located on the hd2? Thanks.
Please help my mms does not work.
Matt
THANKS SOOOO MUCH!!!
I was getting close to throwing this POS in the bin when I read your post about removing the '0's out of the IP address - it works fine now!
were I change the IP ? I dont see any MMS options -.-"

Categories

Resources