I am looking for "run command" in my K-jam that I have installed from one the topics here before hard reset. Anybody remember how?
Thnx
on the today screen hold down the "action" button (middle of d-pad) and tab and hold the clock - if you have the new roms then tap and hold the battery icon (basicly tap and hold the area to the left of where the close button usually is)
hope this helps.
marcwic said:
on the today screen hold down the "action" button (middle of d-pad) and tab and hold the clock - if you have the new roms then tap and hold the battery icon (basicly tap and hold the area to the left of where the close button usually is)
hope this helps.
Click to expand...
Click to collapse
1st one solves the problem tnx.
Related
Hi Ikarus:
I am using Batterystatus V1.04.203 Beta4 build0218.
I meet a very strange problem with the "Devicelock on wakeup" function, I am using WM6, while I am selected this option, when I press "Power" button which suppose to shut down the pannel,I saw pannel shut down and then immeditely turn on with "Screen Locked"!,i have to press "Power" button again to shut down pannel.
I didn't select the option for "Lock if display is Off and vice versa" and "black fix for 10s-bug".
The right behavior suppose to be: Shut down pannel after press "Power" button and press "Power" again to wakeup device and shows last menu with "DeviceLock".
Can someone tell me how to remove the devicelock for first pressing "Power" button? thanks a lot.
hm.. have a look at the intro-message of BS-Thread. There you can see something with DeviceLockOnWakeup..
Create under BatteryStatus-Registry-Key (see manual) a DWORD with name DeviceLockOnWakeup and value 1,
that is DeviceLockOnWakeup = 1
Enter the options and leave them. that's it.
Hi ikarus:
Great, it works, Thanks a lot!
Is there possible to assign volume control buttons as up/down scrolling?
There can be options
- better is if on home screen they works as volume control, for applications as scrolling
- always scrolling
- scrolling only in certain applications
?
Also, is there possible device tilt for scrolling?
maybe you check "AE Button Plus". a lot of discusiion around here
Is is possible?
Yes it is possible - I use it.
I have set it up do do exactly as you as you ask where a "short press" of the up/down volume buttons will scroll up and down and a "long press" will change the volume as normal.
You can download it here http://ae.inc.ru/aebplus.php
Thank you!
AE Button Plus is good application and it works, but it's not free.
Now I try HButton 2.3
http://www.freewarepocketpc.net/ppc-download-hbutton-v2-2.html
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
peeters said:
Thank you!
AE Button Plus is good application and it works, but it's not free.
Now I try HButton 2.3
http://www.freewarepocketpc.net/ppc-download-hbutton-v2-2.html
Click to expand...
Click to collapse
The unregistered function is almost fully functioning.
I recommend it.
I bought the app as I use it all the time and thought it fair to the developer even though I don't actually use the additional functions in the reg version.
CorruptedSanity said:
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Click to expand...
Click to collapse
You should be able to map long press send, long press end and long press power. It should work like the Fuze. Check out this articles but I bet it's identical:
http://www.fuzemobility.com/?p=1751
Here's one on making it the start menu: http://www.fuzemobility.com/?p=1249
The mapped long press buttons take 3 seconds or so...not sure it's great for that unless you try DredSensor but then you'd lose a physical button (short press) to something else...
Is the long press timeout option in the settings the time one has to "long press" in order to trigger what he sets? Coz you can set it from 200ms to 900ms. I am guessing this is the time required to trigger a long-press response/activation.
I would suggest you send an email to the AEB developer. I did once and he responded in the same day.
He could probably guide you much (v. much) better than I on all the options in AEB+ (including "long-key press mode")
thanks Dave.
For a temporary fix,(or perhaps a preferred alternative?) I have set up volume to scroll up and long press (which is barely a second) to start menu (shows quick menu not original start menu) and volume down to scroll down and long press of it to ok/action. This way I can pull down the start menu with a little press, scroll up/down and then select an item or enter the submenu using the down button.
Here is another question/request....
Is there any tweak or registery hack that would show the Quick Menu Button (the little button on the top right corner on the home screen) all the time???
hopefully start a list of useful shortcut for samsung galaxy s.
1. Reboot: press and hold power button for 6 seconds
2. Adjust brightness: tab status bar on top of the screen but don't drag down. Then slide left and right to adjust brightness. Note automatic brightness must be off.
3. Task bar: Press and hold home screen button
4. Phone search: press and hold menu button
5. Arrow key on swype: swype across the (i swype key) and (sym) key to bring up the editing key board
6. Arrow key on normal keypad: press and hold (123) key
.
.
Anyone can help add more to the list ?
Sent from my GT-I9000 using XDA App
Awesome thread; thanks man
Great idea, thanks a lot!
Hi,
I was using with my Note4 an older application . The only way to access the menu in this older application was long pressing the left button key. Now when pressing the left button key , you have the split screen view . I know how to disable the split screen view but not how to reconfigure this left button.
to access the menu of this application
Any idea please?
Thank you,
Daniel
You may be able to do this once rooted and using xposed, but doubt it without this (as on previous models)
Hold the right button (back button), it opens menu for me ?
sindre2104 said:
Hold the right button (back button), it opens menu for me ��
Click to expand...
Click to collapse
Thank you, I tried already but it didn't worked.
Daniel
Try All-In-One-Gestures. Worked for me. You can setup your hardware (Touch) buttons.
Yeh i use that app, love it
Long pressing back button works for me. It takes a little longer than previously but at least it's still there.