Exchange ActiveSync problem - 8125, K-JAM, P4300, MDA Vario General

OMG This is really starting to piss me off.
Hopefully you guys can help me out.
The error on my phone is: ActiveSync encountered network problems or an internal server error while synchronizing.
Support Code: 0x85010015
My info.
Server address: mail.getztek.com (i tried mail.getztek.com/exchange but it removes the exchange part)
SSL is OFF.
Username: Zack (and I tried getztek\Zack as well)
Password: it is right
Domain: getztek (this is the NETBIOS name)
Let me know if you can help.

I would read though my post above. I used my fully qualified domain name rather then my netbios name... netbios was JSI, but jsi.jc.com is the FQDN and that seemed to work for me.
I would also check the SSL, usually it requires SSL, do you connect to your server with a HTTPS or HTTP?
I would put your normal user name, then password, and put your domain name in the domain box. This all worked for me today. Most of this is all in my post above

Refer to Support Code
1. refer to this for troubleshooting guide
http://support.microsoft.com/default.aspx?scid=kb;EN-US;915152
2. Enable verbose logging mode on your device. You can review your log \Windows
Good luck.

actually it just turned out to be a firewall problem as well as no a host pointing to the internal dns

Related

3G connectivity plz help!

Those of you who are using 3G on your Uni, can you please check your settings and let me know what do I need to do in order to set up my 3G connectivity please!
I already have the following:
APN
IP Address
2 DSNs
however when I enter this information it doesn't seem to connect perhaps I'm doing something wrong.
I do have a data plan (3G) so that is not an issue which I am currently using with my iphone without any problems.
Thank you very much for your help!
Over 30 ppl read this post and none of you on 3G?
Please your help is greatly appreciated
Re 3G setting for a Uni,
Hi serjay,
Sorry for the wait I have only just come across your message. Here are the setting you need. I hope they work for you?
You can input all the settings, but I can't seem to be able to access the 3 portal.
In settings, connections tab, connections
advanced tab, select networks
new, and input the relevant info from here:
Data accounts: Create one called 3 GPRS.
APN: three.co.uk
Username:
Password:
Login request: Off
Allow calls: Automatic
IP address:
DNS address:
Authentication: Normal
Data compression: Off
Header compression: Off
MMS settings can be entered via outlook menu
gateway: http://mms.um.three.co.uk:10021/mmsc
proxy: 217.171.192.2
port: 8799
(account is the 3UK avvount above)
Not sure if u need to input the Video gateway.
If anyone know how to actually open the portal, plz help,
I think the problem is that the page detects what device you are using, and an exec is not on their list
secondly - use the http://mobile.three.co.uk/hb/7600/HutchKey as access to the portal - just make it your homepage. this one is for nokia, it works with me.
For those who won´t get the 3Zone to work, try the following:
Using a registry editor, find the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent
then edit the default value to "Nokia6680"
reset
and then surf to the 3Zone Homepage for a nokia 6680 (ask someone who has one to find the url out)
3 Reads the "User Agent" String of the browser yourphone uses to find out which phone you have.
With the trick above you configure the Pocket Internet Explorer of your universal to convince three it is indeed a nokia6680.
So normally you only get phones to work which three has in it´s program.
Regards
Michael.
m1dul said:
...In settings, connections tab, connections
advanced tab, select networks
new, and input the relevant info from here:
Data accounts: Create one called 3 GPRS.
APN: three.co.uk
Username:
Password:
Login request: Off
Allow calls: Automatic
IP address:
DNS address:
Authentication: Normal
Data compression: Off
Header compression: Off ...
Click to expand...
Click to collapse
Hi Michael, thank you for your help but I was unsuccessful; perhaps I’m doing something wrong.
This is what I’ve done:
Start
Settings
Connections Tab
Connections
Advanced Tab
Select Networks
New
Entered “3 GPRS” as my ISP name
Modem Tab
New
Renamed connections to “3G”
Selected a modem: Cellular line (GPRS, 3G)
Next
Entered Access point name:
Next
Entered User name, and password
Clicked Advanced
Selected “Use specific IP address” and entered the IP
Servers Tab
Selected “Use specific server address” and entered both the DSN and Alt DSN
Ok
Finish
Soft Reset
However I still can’t connect!!!
Please if you can provide further direction; hopefully I’ve done something wrong…
Hi serjay,
Sorry for the wait I have been on short break to Kent so I have not managed to come back to you.
All I can think of when I did it on mine was I left Username and Password blank and the IP adress as well.
I am sorry I can not help you any further because I use a Nokia N95 as my mane phone now and not the PDA.
thank you Michael for your help thus far, I guess I'll keep on trying.
Thank you..
m1dul said:
All I can think of when I did it on mine was I left Username and Password blank and the IP adress as well.
Click to expand...
Click to collapse
It worked! I left the username, pass and ip address blank and it worked!! thank you very much!
However 3G on Uni is 5 times slower than on the iphone... a shame!
serjay said:
It worked! I left the username, pass and ip address blank and it worked!! thank you very much!
However 3G on Uni is 5 times slower than on the iphone... a shame!
Click to expand...
Click to collapse
Glad it worked for you.
serjay said:
It worked! I left the username, pass and ip address blank and it worked!! thank you very much!
However 3G on Uni is 5 times slower than on the iphone... a shame!
Click to expand...
Click to collapse
Well, you have to notice the Uni is 4 years older than Iphone, so.... it´s no too bad. Remember when Uni came out no other device can do all that Uni!!
Uni it´s like the grandpa of all the new devices, so we have it some respect as even some of the today devices are not as good as UNI

Cannot access Gmail through native email app

After setting up access to my Gmail account through the native email tool, when I do a send/receive, I get and error saying:
"Cannot connect with current connection settings. To change your connection settings, tap Settings. etc..."
The only time I can do a successful send/receive is when my X1 is connected to my laptop - then I get all my emails. I have already appplied Windows Mobile 6.1 Hot Fix for Sending POP and IMAP E-mail.
I suspect some settings might be wrong - everything else is working fine. Am even getting 3G in SoCal using AT&T on MediatNet. My settings are as follows:
Access point name: wap.cingular
Domain: <blank>
Proxy Setting
Proxy Server: wireless.cingular.com
HTTP: wireless.cingular.com:80
WAP: <blank>
Secure WAP: <blank>
Socks: localhost:1080
Could anyone help? Thanks in advance.
almost certainly its because you are using a WAP connection.
I've never been able to use POP or SMTP on any phone through a WAP connection.
Try using the APN for cingular full internet
a quick google comes up with:-
APN: isp.cingular
User: [email protected]
Pass: CINGULAR1
but don't quote me, and you may need to check with cingular whether they need to change something their end to enable you to use that APN
Im pretty new to email on my phone but i had the same problem i.e. if i was on wireless i could get mail but if i connected via gprs i would get the same error, can not connect etc, i had to set up and new account with the same details as the account which would send and recieve via wirless and tell it to connect via t-mobile internet as there wasnt an auto option, so i now have two accounts for the same email one accesses via the internet and one via t-mobile internet, you can change this if you edit account setup.
Not sure if this is your problem or if i have read it wrong.
Hope this helps
Hi Masseur,
Thanks for the pointer. I did try but looks like it made no difference. Not sure what's wrong from my settings.
Anyone else has seen this? Would appreciate any help. Thanks.
Folks,
Someone in another forum pointed me to the solution. As it turn out, gmail doesn't work off proxys with AT&T. The automatic setup for AT&T had the proxy checked. All was needed is to take out the proxy and just keep the http settings. Working now!

how to use hotmail?

Can anyone tell me how to check hotmail in G1 expect to check it by browser?
Someone told me to use the Moxier Mail.
But What is the Sever for hotmail??
And Why my Brower cannot go to www.hotmail.com in these days...
any one can help me figure out these problem???Thanks a lot
www.hotmail.com works fine for me.
Try google searching hotmail and clicking on the first result?
i dont know why.....
but i just wanna know....is there any application to use hotmail like gmail??of course...it is free...
Try m.msn.com in the browser.
What you can do is what i have done, and it is change your passport account settings.
You change your location to a European country [for me i chose france] ( on your control panel on msn or what not)
And then on your phone,
with the e-mail application, you input your email and password and then click manual setup instead of next.
-------
choose pop3
use these settings,
username: [email protected]
password: yourpassword
pop3 server: pop3.live.com (ssl always port 995)
----------
once you pass the pop3 section you will get to the smtp section:
username: [email protected]
password: yourpassword
smtp server: smtp.live.com (port 25 [tls or none, you should test both])
then you should be good.
When setting and using wifi at home, or work your smtp will not work, which means if you try sending e-mails via WiFi your message might not be sent, (most ISP's block their port 25 from usage [for spam reasons] and more money for them too)
so for that same reason while in smtp you might not be successful if you are not using the phone's web.
Hope this made sense. But it works.
---
also you can use this anywhere on any device and computer which you want to set up pop3 access.
Just set it up in Email (the stock Android software). It gives a warning about Plus accounts, but it finalizes fine. I was on wifi when I set it up, I think it has issues when setting up on 3G/GPRS.
Everything works, incl. alerts and all..
try the steps i have posted here
they worked for me and others
How to Forward Hotmail to Gmail Without paying!
http://allshadow.com/forum/viewtopic.php?f=9&t=4680
elmejor183 said:
What you can do is what i have done, and it is change your passport account settings.
You change your location to a European country [for me i chose france] ( on your control panel on msn or what not)
And then on your phone,
with the e-mail application, you input your email and password and then click manual setup instead of next.
-------
choose pop3
use these settings,
username: [email protected]
password: yourpassword
pop3 server: pop3.live.com (ssl always port 995)
----------
once you pass the pop3 section you will get to the smtp section:
username: [email protected]
password: yourpassword
smtp server: smtp.live.com (port 25 [tls or none, you should test both])
then you should be good.
When setting and using wifi at home, or work your smtp will not work, which means if you try sending e-mails via WiFi your message might not be sent, (most ISP's block their port 25 from usage [for spam reasons] and more money for them too)
so for that same reason while in smtp you might not be successful if you are not using the phone's web.
Hope this made sense. But it works.
---
also you can use this anywhere on any device and computer which you want to set up pop3 access.
Click to expand...
Click to collapse
This worked for me.
This is a great guide to get my Hotmail on my G1!..and it worked perfectly..
Is it completely free though? Even with the notifications?..
I hope so..this is making things A LOT easier that going to Hotmail in my browser..
i have to unlock my G1 if i want to change the location?
if not, how to change it?
jasoncook16 said:
i have to unlock my G1 if i want to change the location?
if not, how to change it?
Click to expand...
Click to collapse
You need to change your location in hotmail, not on the g1.
Wowowowow.....It is running perfectly....Thank You soooooo much^ ^
haha...im still a new user for G1 even though i have bought it for half an year...T.T

Yahoo email account setting

Yahoo POP3 transfer needs one to have a premium account (paid account) which many of us don't have. I couldn't find much information on the forum so I decided to post the setting in case someone else is looking for similar details. Sorry if this has been previously discussed.
1) From Application menu click on Email
2) Click on left button(settings) and click Add account
3) After you are done putting you information for username and password in, click on Manual Setup
4) Click on IMAP
5) For IMAP server: imap.mail.yahoo.com - Port: 143 leave the rest alone
6) For SMTP server: smtp.mail.yahoo.com - Port 587 leave the rest as they are.
7) Follow the steps per your preferences and you are done!
I hope I could help a bit.
Yahoo.com does that, Yahoo.(other country) will have pop3 access automatically.
I'm trying to configure my hotmail acount with no sucess...anybody knows how to do it please?
rogeriok said:
I'm trying to configure my hotmail acount with no sucess...anybody knows how to do it please?
Click to expand...
Click to collapse
See if the below setting can help:
POP server: pop3.live.com (Port 995)
POP SSL required? Yes
User name: Your Windows Live ID, for example [email protected]
Password: The password you usually use to sign in to Hotmail or Windows Live
SMTP server: smtp.live.com (Port 25)
Authentication required? Yes (this matches your POP username and password)
TLS/SSL required? Yes
Nimche said:
See if the below setting can help:
POP server: pop3.live.com (Port 995)
POP SSL required? Yes
User name: Your Windows Live ID, for example [email protected]
Password: The password you usually use to sign in to Hotmail or Windows Live
SMTP server: smtp.live.com (Port 25)
Authentication required? Yes (this matches your POP username and password)
TLS/SSL required? Yes
Click to expand...
Click to collapse
Thanks for reply,but this setings are not working"can't find this server"
Nimche said:
Yahoo POP3 transfer needs one to have a premium account (paid account) which many of us don't have. I couldn't find much information on the forum so I decided to post the setting in case someone else is looking for similar details. Sorry if this has been previously discussed.
1) From Application menu click on Email
2) Click on left button(settings) and click Add account
3) After you are done putting you information for username and password in, click on Manual Setup
4) Click on IMAP
5) For IMAP server: imap.mail.yahoo.com - Port: 143 leave the rest alone
6) For SMTP server: smtp.mail.yahoo.com - Port 587 leave the rest as they are.
7) Follow the steps per your preferences and you are done!
I hope I could help a bit.
Click to expand...
Click to collapse
is this push mail or pull mail?
Thank you so much omg i finally got rocketmail working
Setings for hotmail
I found in google the setings for hotmail acount and works to me
incoming settings
protocol =pop
pop server = pop3.live.com
security type =ssl
server port =995
outgoing settings
login required =ticked
username =hotmail addy ie [email protected]
smtp server=smtp.live.com
security type=tls
server port=587
Account name =Hotmail
Your Name =what ever you want it to display
Nimche said:
Yahoo POP3 transfer needs one to have a premium account (paid account) which many of us don't have. I couldn't find much information on the forum so I decided to post the setting in case someone else is looking for similar details. Sorry if this has been previously discussed.
1) From Application menu click on Email
2) Click on left button(settings) and click Add account
3) After you are done putting you information for username and password in, click on Manual Setup
4) Click on IMAP
5) For IMAP server: imap.mail.yahoo.com - Port: 143 leave the rest alone
6) For SMTP server: smtp.mail.yahoo.com - Port 587 leave the rest as they are.
7) Follow the steps per your preferences and you are done!
I hope I could help a bit.
Click to expand...
Click to collapse
Doesn't work on my x10...
I got the same message: "incorrect user name or password" after I put the IMAP server settings ang click Next
Any suggestions?
Hi, I managed to sort out my yahoo mail. It is however for *@yahoo.co.uk
Note that I'm on the regular Yahoo mail, not Plus or anything paid. However I am on the new yahoo interface as opposed to classic.
1. Log into your yahoo mail and click on "options" on the far right area of your screen
2. Select "More Options..."
3. Click on "Pop and Forwarding" on the left menu
4. Ensure "Allow your Yahoo Mail to be POPed" is selected.
Ok now onto your phone settings (change yahoo.co.uk to *.com where applicable).
Incoming Mail (POP3) Server: pop.mail.yahoo.co.uk
Outgoing Mail (SMTP) Server: smtp.mail.yahoo.co.uk (use authentication, optionally use port 587)
Account Name/Login Name: Your Yahoo! Mail ID (your email address without the "@yahoo.com")
Email Address: Your Yahoo! Mail address (e.g. [email protected])
Password: Your Yahoo! Mail password
Hope it helps

Authentication type bug detected in TF101G

Hi all.
I have detected a bug in authentication type option when configuring a new APN for 3G connection.
In my company, mobile devices connect via 3G connection to corporate network resources. The authentication is provided by our corporate RADIUS server. For reasons not related to this issue, the RADIUS server only provides PAP authentication.
So I have set in TF101G's APN configuration username and password and entered PAP authentication type, but I cannot access to my network resources behind APN.
I have obtained some log and sniffer traces from our corporate RADIUS server where I can observe that TF101G always tries to authenticate using CHAP. So that's the reason why authentication fails.
I've also tested it with samsung smartphones and tablets and it works Ok!!
So I would be pleased if you could verify this same behavior in TF101G. But you would need to obtain sniffer traces from authentication process to verify.
Please, could you confirm this behavior?
Many thanks in advance and best regards,
Ernesto.
sometimes my lips get CHAPPED
Don't worry about that. Wikipedia is up again:
en[dot]wikipedia[dot]org[slash]wiki[slash]Chapped_lips
Best regards,
Ernesto.

Categories

Resources