hi, i bought my universal off ebay "brand new" for 258 GBP including postage which i reckon is a good price.
i have been using wizard so far and today i changed it for universal..the pocket pc is a real beauty..i really like it. i noticed two things which worriy me. the 1st one is : when i try to turn off the device it goes only to sleep mode but donst switch off. in wizard when i pressed turn off button it basicly turned off the device. is it normal in universal to make it sleep ? how can i really turn off my device. and the other thing is my universal dosnt detect SD card. i have got two of them one which came with my universal and the other one is the one i was using with my wizard. how can i make my universal detect them ??? (512mb and 2GB)
cheers, cudo
hey ! yeah ihave been researching a bit and i can tell with great confidence that universal dosent shut down, many pocketpc's dont.Some like your wizard are an exception. even i have a universal.
Regarding not detecting SD Card it seems odd, is it not appearing in explorer at all ? cause i've never had that problem
yes excatly it just dosnt appear in explorer.I will try to format it latter on and so how it is. is it normal I haven't got msn on my mda pro?
Hmm. this might sound like a dumb question but r u sure u're inserting it the right way ?? lol..
hehe yeah i think so and what about the MSN ...have u had it pre-installed on you universal ?
I'd be a little bit worried about it not detecting any SD cards and test it ASAP as I've not had any problems using several different ones - here's hoping it is not a hardware fault...
As far as MSN is concerned, it depends on the ROM you are using - they have different things installed and I've noticed one or two didn't include it.
Either way, using the instructions and vast wealth of knowledge on this forum, you should be able to find one that you like
all sorted at least for the moment...i am using mini sd card with adapter and after i locked it and instrted the card once again my universal detected it
can u tell me how to "activate" real VGA ? or give a thread on that ?
cheers, cudo
after a while the car is not detected again i have to take it out and put it back. thiss happens when usinng mini sd with adapter after inserting sd card everything seems to be ok....for now;
try this for true VGA and many other hacks:
http://forum.xda-developers.com/viewtopic.php?t=41968
Related
Nothing new here, but i am having problems with my Backpack and would like to find out from other backpack users if they are having problems. in order to be able to evalute the problems and possibly approach o2 could you please say where and when purchased, nature of problem, has this problem been from day 1 or did it develop.
thank you in advance, but i'm tearing my hair out here and i'd like to know the experiences of others before i go to o2 with what they may consider is a unique problem.
ian
ianlake said:
Nothing new here, but i am having problems with my Backpack and would like to find out from other backpack users if they are having problems. in order to be able to evalute the problems and possibly approach o2 could you please say where and when purchased, nature of problem, has this problem been from day 1 or did it develop.
thank you in advance, but i'm tearing my hair out here and i'd like to know the experiences of others before i go to o2 with what they may consider is a unique problem.
ian
Click to expand...
Click to collapse
I have the backpack, bought it in may04. Don't use it much except maybe on holiday.
What problem are you having ?
Bought mine from O2 at same time as Xda II, works a treat although not used the CF slot must, mainly used with LCD projector for powerpoint.
Control 2 x XdaII & backpacks at work and haven't seen any problems.
If you post the exact problem I'll see if I can replicate it.
Bought mine from a PDA store in Kuala Lumpur about 4 months ago.
So far have experienced no problems.. Use the CF slot for memory cards and a Dell WiFi card. Use the video output with my Epson LCD projector.
Ed
backpack
My problem is i cannot get system to recognise any compact flash card i insert. first card i bought was fuji - i inserted the cf card and the system requested drivers! then i tried a bytestor same problem. i invested in a card reader and formatted the cards still the same problem. on one of the forums here i spotted a download 'bpinsert' i tried that and altho' it is a shortcut to a non-existent program the fuji card was recognised for a short while and i seemed to be able to access it, then the system froze and after a soft reset the problem started again. i have the part number, serial number and model number and am about to approach htc to see if i have a good product, if not i'll have to buy a new digital camera to use the 256mb flash cards and i'll sell the backpack on e-bay to some schmuck. (joking). the thing that is making my tear my hair out is i bought an sdio gps unit, as i was going to lose storage space i bought a backpack, now i find the sdio unit will not work without an update with autoroute 2004 and altho' the back pack does work with presentations - about three per year - i can't use the storage facility. oh well one lives and learns. still i could save some money on a new camera i know this guy............................
BackPack Problem
Hi,
I got my BackPack about 3 months ago, the reason I bought it was to do my powerpoint presentations using my Imate (xdaII). But the problem I found is that the Imate gets too slow. Have you also experienced the same problem?
Regarding the CF Card, it works fine, reading and writting, note that I heard 1st set of backpack manufactured early this year can not write to BackPacks!
One more problem, if you use XCPUScalar Softwar (to speed-up your PDA to 530 Mhz) then it can not recongnize the CF Card in the BackPack, you can not read or write either (acutally as if it does not exist). I guess this is due to the Speeding up software. If I enable it, then CF card is available and the Imate can recognize it.
Unkown card error
ianlake-
I've got the same problem - you're not alone. I am trying to use a 1 gig IBM microdrive and a 128MB noname card. Both, from time to time, ask for drivers for the "unknown card". What's worse is the error is sporadic and I can't rely on using the storage for anything important on the go. My desktop has a built-in reader (in which both cards work fine) and one of the main reasons I bought the backpack was to transfer files quickly from desktop to CF to I-mate. I haven't been able to find any tips in my searches but please keep me informed of any progress you've made.
Re: BackPack Problem
GoldenSands said:
One more problem, if you use XCPUScalar Softwar (to speed-up your PDA to 530 Mhz) then it can not recongnize the CF Card in the BackPack, you can not read or write either (acutally as if it does not exist). I guess this is due to the Speeding up software. If I enable it, then CF card is available and the Imate can recognize it.
Click to expand...
Click to collapse
This is certainly the answer to my problem, uninstalled XCPU Scalar and things are all OK, including some things that i hadn't really noticed.
I think i should contact XCPU Scalar and report the problem.
Thank you GoldenSands.
ian
Most welcome "ianlake".. but does your Imate go very slow when you connect it to the projector and run a presentation? Even if it is connected to the monitor!
from what i've been able to read then when one display using the backpack the fps is limited to 1-2
which could cause it to seem pretty slow
Rudegar said:
from what i've been able to read then when one display using the backpack the fps is limited to 1-2
which could cause it to seem pretty slow
Click to expand...
Click to collapse
Sorry, but what is "fps"??
The only reason I bought the BackPack is to run the presentations through my Imate, and I was unable to do so; due to the very low speed I get when it is connected to the projector. Actually it gets slow once I run IA Screen Mirror.
I got IA Screen Mirror Ver 2.01 (Build 15055)
Is any one aware about a newer version? and from where can we download it?
fps == frames pr second
as in how many pictures you get every second
GoldenSands said:
Most welcome "ianlake".. but does your Imate go very slow when you connect it to the projector and run a presentation? Even if it is connected to the monitor!
Click to expand...
Click to collapse
yes, horribly slow, but by the time i get round to doing my presentations at the end of a boring lesson my students have gone to sleep - so no-one notices.
ian
Driver pleese for Backpack
frog said:
Driver pleese for Backpack
Click to expand...
Click to collapse
Es!!!!
:lol:
GoldenSands
Спасибо !!!
I use my backpack with a compact flash modem and I did'n face any problem with it. But after purchasing a sandisk connect plus, WiFi+128 MB card, the device is getting very very slow plus it is only recognizing the memory part and not the WiFi part.
Originally I wanted to use my i-mate with WiFi but nochances.
I even formated my device several times but the original driver is nor working.
Also after contacting sandisk directly I got no help!!!!!!
RE
FI, no overclocking programs like XCPUSCALAR etc work with backpack. The files in the CF card will not be recognized if overclocking progam is installed especially if you set the speed above the default speed setting. Also, GPS performance is erratic.
I've changed my backpace twice. Firstly, it was a faulty backpack that could not recognised my CF card after a few weeks of usage. The 2nd time was the backpack battery konks out after about a year of usage. Could be due to end-of-life of backpack battery. All were changed within the warranty period of the backpack.
Hi.
I have tried to make two different WiFi SDIO cards work in my Qtek S100 now with no success despite following all advice on these forums and trying many different drivers etc.
My suspicion is that my S100 has a hardware fault and cannot read from the SDIO slot (although MMC cards work fine).
Does anyone know whether there is a way of checking this hypothesis?
Cheers,
Tom
Solved it!
The extra pin that SDIO uses had got pushed down. Use of cocktail stick to bend it back again solved the problem...
The answer to "is there an SDIO test" is yes - insert the card when the device is on standby. If the screen lights up, it's seeing the card.
Tom
Hmm... I sort of have the same problem. I got my new Wifi card today (PocketGear, or Spected mini card) and used it for 10 minutes. I took it out to replace my SD card, the screen lit up but nothing is recognising. Storage card doesn't appear and phone things nothing's connected when the Wifi card is in. Not good!
I'll check the pins when I get home, but since the screen is lighting up I'm not sure about that,
Any ideas, people?
Ok, well it seems it's fixed. 3 hard resets in 10 minutes fixed the issue! Good ole Microsoft, making nice and sturdy operating systems!
I'm having problems with my SD 2gb card from SanDisk (made in China) , the data is corrupted . Just bought a Kingston 2gb, made in Taiwan, slightly thicker than de SanDisk (just the feeling I think) and hope that the problem stays away. Are there more people that have the same problem with de HTC P3600 (HTC Trinity, SPV M700) in combination with a sd mini card? I've send a mail to de customer service yesterday and received an automatic reply. Now it is waiting for an answer. I have the hope it is just a small parameter in the setting of the PDA. When I let the PDA go to standby itself after 2 minutes it seems to be OK for now at least. Please give me some reactions from P3600 owners! Look at this link for the same problems on the Artemis: http://forum.xda-developers.com/showthread.php?t=285511
problem with mini SD
Hy
it seems that P3600 have several problem with mini SD.
first of this expencive pocket diamond does not like all kind fo mini SD..moreover i used a kingston 2GB and it was working well since 3 days ago...then BLACK OUT.
The pocket pc soes not see the mini sd anymore!!
Why? I really do not know, but i'm not the only one who is experienced in this beautiful situation!
HTC says that the problems with the artemis and the sd-card are depending on a software bug together with WM5, and they are working on it. I think, it is the same bug with the trinity
I have a microSD with miniSD Adapter, and is corrupted, and the size of corrupted data is increasing day after day ....
After few days I need format this f***ing card ..... I hope HTC fix this bug soon !!!!!!
Alex13
it happened to me couple of times with a trascend mini sd 2gb.
it really really sucks.
coming from a Mac only world sometime I feel throwing the trinity down a bridge is the best thing to do... I'm not used to crashes and corruption.
But hey, it's the only way to actually use skype when I'm around...
anyway, last week I've installed Trinity Hacks 0.2 a free app that modify the registry, one of the functions is to fix SD compatibility.
I didn't have problems since
This is what HTC told me:
Thanks for your email regarding your P3600. The SanDisk Ultra II 2gb mini SD card is not compatible with the device. Instead of an Ultra card you need a standard mini SD card with no more than 2GB.
I bought a Kingston 2GB and it's running a few days without any problem, keeped my fingers crossed while typing this!
I think I have the fix, instead of re-formatting the card connect the trinity (or data card) to your PC, make sure you can see hidden files and folders, search for a folder/directory starting "MSM". Delete this folder and all the files that have become an issue become unlocked.
Sorry if some one else has posted this fix, just saved myslef hours re-installing TomTom by doing this.
Hope this helps
Graham
Because I'm planning on upgrading the Wizard, when I needed more storage I bought a 2Gb microSD and micro-mini adapter.
Although it works okay, I've found that if the card/adapter is ejected from the Wizard, when I re-insert it, it's not recognised. If I put it in a card reader attached to the PC and do any file read/write I can then put the card back in the Wizard and it works fine.
We're on holiday in a little cottage and the wizard got knocked off a table and the card pinged out :-( One hundred miles from home, does anyone know of and "repair" tools that I could d/l to try and fix it? I might be able to find a PC shop next week, but for now am stuck with no Sat Nav and only the web for company ;-)
Thanks in advance
Dox
yeah...
I found that if you just pop the card out and insert it again, it gets recognized. However, you might have to do this a few times. I ran into the same exact problem this morning. For some reason the phone doesn't pick up the card when it's inserted sometimes...go fig.
Thanks for the suggestion, which sadly, in this case hasn't worked. I have seen what you describe with the 512MB MiniSD card I used to have installed (and which would usually be recognised fine). Once or twice it wasn't recognised and I tried the repeatedly inserting trick until it worked again.
This 2gig card is great for space but a bit awkward for stability. I bought it so I could get the UK and SE USA TomTom maps on one card when the US maps wouldn't quite fit on the old one.
I'm going to try see if the local PC shop will do me a favour, failing which I'll see if I can get a cheap USB reader and borrow the PC of the people who own the cottage..
Holidays are great fun ;-)
Dox
Dox said:
Because I'm planning on upgrading the Wizard, when I needed more storage I bought a 2Gb microSD and micro-mini adapter.
Although it works okay, I've found that if the card/adapter is ejected from the Wizard, when I re-insert it, it's not recognised. If I put it in a card reader attached to the PC and do any file read/write I can then put the card back in the Wizard and it works fine.
We're on holiday in a little cottage and the wizard got knocked off a table and the card pinged out :-( One hundred miles from home, does anyone know of and "repair" tools that I could d/l to try and fix it? I might be able to find a PC shop next week, but for now am stuck with no Sat Nav and only the web for company ;-)
Thanks in advance
Dox
Click to expand...
Click to collapse
Someone else found a tool called "Storage Tools" which is: http://www.softwinter.com/storagetools.html
I've used it and it has the option to format, scan/repair, and defrag the sd card directly from the phone. Maybe it'll help you out if you don't mind doing that if the program will even recognize the card being in there at all.
If you click their download page there are CAB file downloads! It also says the program costs money but I sure didn't have to pay to download it, and the usage doesn't look like a trial program, it looks like the full blown real deal!
BigRed Productions said:
I found that if you just pop the card out and insert it again, it gets recognized. However, you might have to do this a few times. I ran into the same exact problem this morning. For some reason the phone doesn't pick up the card when it's inserted sometimes...go fig.
Click to expand...
Click to collapse
Face the exact same thing. So I avoid removing the card from the wizard. The key seems to be to insert it at just the right angle. Don't put too much pressure though. ;-)
HEy guys! I have a small problem. I have a Kingston 1 GB microSD with miniSD adapter and I wanted to use it with my Wizard, but it's not working! (On my PC it works) Please help! I've tried several ROMs (thought that it's the failure of the software), but no effect. Maybe the device's slot turned dead?
you should first check if it accepts a regular MiniSD card and see. i heard about adapter compatibility issues so it might be that.. but again, check if it works with Regular miniSD... if it doesn't, it's probably a problem with your device. try a shortcircuit between the leg on the far left and the one before far right one.. (after putting it in your adapter)..
Thank you for your fast reply! I will do as you adviced and write when I got any news.
no prob.. just make sure you don't burn your card.. hope it helps.