Related
anyone know how/where to get an xda mini II repaired? i'm in italy, but i can careless where it has to go. I'm at the point where i would rather just sell the device for it's workable parts (if there are any)...Today the screen has done a myraid of interesting things...anywhere from blank to thousands of vertical lines....ugh...
ohh yeah...warranty is void....or is time to just move on?
ok...no answers so i thought i would add some images ...anyone seen this before?
Mate i had a similar **** up a while back ...I did a HR and it worked fine..for me it was caused by a Overclocking software [Dnt want to Name it ]
If this dnt work try the Batt out and back in trick
Call ur Local service Center...
mine looks exactly teh same! but it happened after i tried to replace my housing, i screwed up the little gold prongs where the ribbon connector from the lcd plugs in...****! any ideas on how to fix? im the us so service center isnt really an option, and id ont want to send it off.
hi i had the same problem with my magicians, after i changed the housing. i found the problem with my device was that i had not plugged the screen back in properly. all i did was to ensure that it was pushed in properly before i clipped it back in
Menappi -
I had the exact same issue. I reopened the casing WITHOUT disconnecting any cables. I flipped the screen's ribbon black lock up, while maintaining pressure on the ribbon so that it does not pop out. When the black lock lifted, the preasure of my finger moved the ribbon further in . I pushed the black lock down, reassembled the device and ... PRESTO!! the screen works perfectly... and chumps on the bard advised to buy a new screen!!
Good luck
Hi All,
seems, you have problem somewhere in display connector. However, sometimes I see similar picture on physically broken displays, let's imagine, you were careful ad didn't use a hammer during housing replacement.
There are two possibilities: at first - try to remove and re-insert display cable (I hope, you know. how brown lock works). If there is no success - try again. At second - some wire on flat cable may be damaged. Sometimes, good technician with soldering iron can fix it, sometimes not. And if you used force, removing cable, board connector may be damaged too. However, only the experienced man can find it easily.
So, try to carefuly re-insert display cable. Try several times. If you are unsuccessful, you, for sure, need an experienced technician to fix your device.
I hope, you are not enough mad to send device for repair to Russia
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
stuart.myers said:
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
Click to expand...
Click to collapse
I guess you already tried hard reset?.
Can you get to bootloader mode?.
Tried hard resets, and getting to bootloader mode, i think this is a malfunction with the actual device, I just need to find out how to get in touch with o2 support internationally, i was wondering if someone on here may have had this problem too.
Thanks.
white screen - connector loose?
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
xda operation
tophamn said:
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
Click to expand...
Click to collapse
Hello there,
I had to get inside my xda to replace the screen that one of my dear rug rats broke. it is quite easy to do, and you only need to get into the screen side of it to get at the conectors. spin the screen half way round and look at the bottom and you will see 6 small screws. take out the two furthest out and two in the middle nearest the screen side. if you take them all out the whole thing becomes hard to handle. the front cover should GENTLY leaver off, and the cables to it exposed. even if they look in place lift the catch holding them in place and take them out and wipe the contacts with a cloth. just be very carefull with the cable strips as they tear very easy. . any problems then PM me
TTFN
Jay
White Screen
Try www.gpsmidlands.co.uk they replaced my ribbon assembly the same day.
Xda Lcd Repair
Try http://www.pda-repairs.co.uk
Brilliant
thanks for this posting - worked perfectly once i had worked out that atually you need to remove the screws further away from the screen in the middle. but otherwise I have successfully resurected a brick into a working universal! thanks!
Sark
I was removing the back cover, as I had to remove a broken stylus from its clot.. I successfully removed the 3 screws, and was able to prize open the case, and push the stylus out...
However, I put it all back together and now it doesnt work!! I get the red light on to charge when I insert power, but I cant turn it on...
I did notice that somehow, the contacts for the battery seem lose, and I dont know how to fix them...
How do you remove the whole of the back??
Anyone help, or suggest what I may have done??
Thanks
I think it is truly dead.. the plastic thing with battery contacts has come off completely... now how the hell do I fix that!!!!
Think I may be able to fix it, as if i hold it in place over the contacts on the board, i managed to get it to boot... so i just need to find away to fix it to the board....
Fingers crossed
DocSoton said:
Think I may be able to fix it, as if i hold it in place over the contacts on the board, i managed to get it to boot... so i just need to find away to fix it to the board....
Fingers crossed
Click to expand...
Click to collapse
Better news than I expected to hear. Are the contacts broken above board level? If so a fix may well be possible by re-soldering the contacts. This could be tricky in as much as it may be difficult to prevent heat transfer down the wire into the board. I had assumed they had been wrenched out below the board surface. If you just glue the connector housing withe contacts in place you might be lucky and find it reliable. However I would worry that with every knock or jolt you.ll find the pone will turn of and you'll have to keep re-starting it.
Mike
See attached, not great quality, but you can see the contacts...
What on earth do I use to stick it back on???
DocSoton said:
See attached, not great quality, but you can see the contacts...
What on earth do I use to stick it back on???
Click to expand...
Click to collapse
From that it appears to have snapped through the soldered joints without any real damage. If that's the case then it is fixable. The last example we saw of this on the forum the contacts broken inside the board, but it looks like you are lucky.
Mike
From your comments, it sounds like you don't have any experience with soldering. I would look for an electronics repair shop, or find a friend that has experience soldering.
If you can't find that you may only have the option of selling it somewhat cheap. I do my own soldering, so I don't know what direction to try to point you for that. Hopefully this will help you getting your hermes back up and running.
Thanks for all your help.. lukily the old man is a sparky.. so Im sending it up to him to have a go, if not him, then his mates and electronics whiz.. so hopefully I should get it back all sorted.
Cheers
Its been a while since I started this post... just not got around to getting it sorted until recently...
Now, does anyone know what the different contacts do?? We have partial success with resoldering the contacts, the device now turns on, when on power, but it is not charging the battery.. I can only assume the contact(s) responsible for charging the battery may have a poor solder...
The battery says 100%, but when I remove power, it turns off after a very short while...
Can anyone help..?? Its come along way since I originally broke the device, and I wasnt sure if it would ever work again.. but I seem to be so close to breathing life back into the phone, and am sure we only need to resolder a couple of the contacts.... Would be handy to find out what all the contacts actually do...
The battery may have gone bung, especially as its 6 months later that this problems started. If it started right away I'd say it could be the contacts but if it has only just reared its head I'd say that the battery needs replacing. If you can get your hands on a spare, they are fairly cheap through ebay (less than $10), then you can check if it is the battery.
Cheers...
I already had a spare battery.. I get the same on both...
After powering on, the light goes amber for a couple of mins, suggesting it is charging, then goes green.. show 100% charged.. but dies after a few mins...
If the power is not connected, phone wont even turn on... I can only assume neither of the batteries is being charged...
I did read somewhere, although cant remember, that one of the contacts is responsible for charging.. would be good to know what the contacts do...
Thanks
Best idea would be to go to Mike Channons site. He is the guru of all things HTC. At the very least you could pm him but I haven't really seen him hanging around the Hermes site for a while. The link to his site is in his sig.
Cheers...
Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!
cool story bro
when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it
Why does the screen go black?
Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!
Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.
I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.
In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.
I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O
Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.
great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems
I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components
Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -
perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!
Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike
Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.
TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.
DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.
Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!
for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.
Hi guys, if someone here suffered from this kind of flickering >>VIDEO LINK.
How do you managed to fix it? What part did you change, the screen or the motherboard? Thanks. Really need some help. My phone now is unusable.
]]]]]] UPDATE 1[[[[[[[
Hi guys, just got my G2 back from the dead.
I send my G2 to a phone care in the city and they said my lcd is the problem, they changed the lcd+digitizer (the whole half of my G2 )and now the problem is gone. But When I got home I noticed vertical lines on my G2 when it is turned off, not really noticeable but if you look closely you can see the vertical lines and thinking that they change it with a low quality LCD. Even in white backgrounds you can see the lines but only if you have a clear eyes . I compared it to the original LCD and I don't see any vertical lines at all, it's all black. But the frame of the new lcd is solid like the original. So, in the future, will this new LCD survive or should I go the phone care again? Thanks!
***********UPDATE 2************
[UPDATE]
I think my G2 is working now after playing games for hours in 5 days, no flickering/stuttering/jittering noticed.
But, my IMEI was change and it was rooted jellybean when they give it to me. I don't know if they change the motherboard or the whole phone except for the body case and the new screen i purchased. I asked them about the changes of the phone because it's my second time returning the phone and the women on the counter said their tech just adjust something. I don't believe that, and then I saw the IMEI changed. I didn't ask why my IMEI was change, i'll wait til something goes wrong on my G2 and sue them. LOL.
I have some questions regarding this.
1) I'm not really sure if how an IMEI was change, is it for changing the motherboard?
2) Is it legal that they don't tell me what they change on my phone?
For now my G2 is still alive and no problem after upgrading to lollipop + root + twrp. Hope it goes all well now.
coowkeee said:
Hi guys, if someone here suffered from this kind of flickering >>VIDEO LINK.
How do you managed to fix it? What part did you change, the screen or the motherboard? Thanks. Really need some help. My phone now is unusable.
Click to expand...
Click to collapse
i went to lg service and they changed some filters on motherboard in 2 hours filter,EMI/Power 2 quantity i read on the paper. i was on warranty..
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
OverClockeD_GR said:
i went to lg service and they changed some filters on motherboard in 2 hours filter,EMI/Power 2 quantity i read on the paper. i was on warranty..
Click to expand...
Click to collapse
I think i'm out of warranty because i bought it when it was newly released. Do you think lg sc will fix it by paying them cash?
Silentwidow said:
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
Click to expand...
Click to collapse
Ok, thanks for the tip. Will try to clean it tom and update here. Do you think smoking in front of the phone makes it dirty?
they told me that it may happen cause of heat..and its common issue
dunno really happened to me after i flashed some loli roms.... and ye im sure they will fix but they will ask 100euro+ for sure.....
imagine even the girl that works there told me her screen starts doing it ..
Silentwidow said:
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
Click to expand...
Click to collapse
Boom!!!!!
What he said
tiguy99 said:
Boom!!!!!
What he said
Click to expand...
Click to collapse
Now, I'll definitely try it. Watching some disassemble videos now. Hope it works. :angel: :angel: :angel:
coowkeee said:
Now, I'll definitely try it. Watching some disassemble videos now. Hope it works. :angel: :angel: :angel:
Click to expand...
Click to collapse
When you replace your lcd they always tell you to make sure you have both connectors securely in place above the usb connector. One of them is the ground connection to your LCD!
Make sure both are fastened correctly and test before you seal your phone back together.
Keep us posted
Silentwidow said:
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
Click to expand...
Click to collapse
tiguy99 said:
When you replace your lcd they always tell you to make sure you have both connectors securely in place above the usb connector. One of them is the ground connection to your LCD!
Make sure both are fastened correctly and test before you seal your phone back together.
Keep us posted
Click to expand...
Click to collapse
Cleaned all the connectors and securely placed it well, but nothing happens. I think it really needs a change parts.
Thank you anyway.
OverClockeD_GR said:
they told me that it may happen cause of heat..and its common issue
dunno really happened to me after i flashed some loli roms.... and ye im sure they will fix but they will ask 100euro+ for sure.....
imagine even the girl that works there told me her screen starts doing it ..
Click to expand...
Click to collapse
I think we have the same cause of the problem. :/ First I have the yellow spots then this happens. :/
Will go to service center after I worked for cash, lol.
coowkeee said:
I think we have the same cause of the problem. :/ First I have the yellow spots then this happens. :/
Will go to service center after I worked for cash, lol.
Click to expand...
Click to collapse
Please keep us posted on the results after you get the new screen.
Share your thoughts on this thread
http://forum.xda-developers.com/lg-g2/help/screen-flickering-change-screen-t3069110
tiguy99 said:
Please keep us posted on the results after you get the new screen.
Share your thoughts on this thread
http://forum.xda-developers.com/lg-g2/help/screen-flickering-change-screen-t3069110
Click to expand...
Click to collapse
Hi guys, just got my G2 back from the dead.
I send my G2 to a phone care in the city and they said my lcd is the problem, they changed the lcd+digitizer (the whole half of my G2 )and now the problem is gone. But When I got home I noticed vertical lines on my G2 when it is turned off, not really noticeable but if you look closely you can see the vertical lines and thinking that they change it with a low quality LCD. Even in white backgrounds you can see the lines but only if you have a clear eyes . I compared it to the original LCD and I don't see any vertical lines at all, it's all black. But the frame of the new lcd is solid like the original. So, in the future, will this new LCD survive or should I go the phone care again? Thanks!
I hope someone here share their experience on their 2nd LCD. Thanks!
:crying: :crying: :crying:
[UPDATE]
After few days of youtube and playing games, my phone started stuttering/flickering again like on my first post -_-
I paid for the new LCD that they change, should I pay another bucks for the motherboard problem? or they'll give me a refund for the new LCD I bought that didn't fix my problem? Please someone reply me asap. Thanks
This error is on mainboard. Fix it is very simple. I has lot about 10$ for this solution.sorry bbecause my english's bad.
[UPDATE]
I think my G2 is working now after playing games for hours in 5 days, no flickering/stuttering/jittering noticed.
But, my IMEI was change and it was rooted jellybean when they give it to me. I don't know if they change the motherboard or the whole phone except for the body case and the new screen i purchased. I asked them about the changes of the phone because it's my second time returning the phone and the women on the counter said their tech just adjust something. I don't believe that, and then I saw the IMEI changed. I didn't ask why my IMEI was change, i'll wait til something goes wrong on my G2 and sue them. LOL.
I have some questions regarding this.
1) I'm not really sure if how an IMEI was change, is it for changing the motherboard?
2) Is it legal that they don't tell me what they change on my phone?
For now my G2 is still alive and no problem after upgrading to lollipop + root + twrp. Hope it goes all well now.
Hi guys, i have a similar problem. I bought a new lcd on aliexpress.....that is the video of the problem....
http://www.mediafire.com/watch/glzqihgdzz12jsj/Lgg2_lcd.mp4
The strange thing is , not in every operation make the same problem. after days i see that problem usually on facebook and a lot on clash of clans .
I make also a screenshot on the clash of clans and when i open the picture the screen flickering .....
its like when the phone show some combination of color make this problem
My Lg PRO 2 Phablet did the same from first turn on, flickering on and off, very dissapointed as i had mine direct from Hong Kong and couldnt send it back. What i did was to tak all of the screws out and take the plastic back off, then re fitted the back only, no screws and turned on, no more flickering. Then i put a couple of screws in and tried again, still no flicker, then after a couple of more screws by the sim socket it started to flicker again! Now i just run the phone minus a few screws, it must be a pressure thing!
Hi, i have exactly the same problem, specially in combination of colors (green red and blue most of the time). how did you manage to fix your phone ? did you change the mainboard ? thanks for your help.
Benz83 said:
Hi guys, i have a similar problem. I bought a new lcd on aliexpress.....that is the video of the problem....
The strange thing is , not in every operation make the same problem. after days i see that problem usually on facebook and a lot on clash of clans .
I make also a screenshot on the clash of clans and when i open the picture the screen flickering .....
its like when the phone show some combination of color make this problem
Click to expand...
Click to collapse
Hi, i watched your video, and i have exactly the same problem, specially in combination of colors (green red and blue most of the time). how did you manage to fix your phone ? did you change the mainboard ? thanks for your help.