anybody know how to switch on in locked the Device when nothing occurs in xx seconds?
thank you
power=>turn off device if inactive ....min
device autolocked!
...no no. I need that the device alone go to autolocked. Understand?
sorry for my english.
Johnny
Related
how to fix my phone XDA mini PM10A dead
First off, you're a little vague on details, don't you think?
Second of all, you're phone is not a Charmer. It's a Magician; moving to the right place.
the phone not power.
any solution to check if hardware problem or software?
Are you saying that the battery isn't charging, or the unit itself isn't turning on?
Can you get it to go into the bootloader mode?
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.
but if it doesn't charge (you don't even see the red light)
go! get it repaired, hardware has gone bad.
mariner_heart said:
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.
Click to expand...
Click to collapse
My Magician, will not connect in the bootloader mode (dot detected by the RUU). Whenever I use the No_ID RUU, it keeps saying that the upgrade tool, isn't for my device (although it was downloaded from the official site).
Any suggestions?
hi
hi every bady.my xda o2 its on german language.how i can fixed on english language.
mariner_heart said:
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.QUOTE]
Hi, can any1 explain to me what it means by "flash a rom"?
I'm having the same problem, my screen shows "USB Ver 1.0"
Please help
Click to expand...
Click to collapse
I have a problem cause my younger cousin was entering a bad password into my touch dual, and now i have it locked (it shows in WM to enter password but when i click on unlock nothing happens). He entered bad about 50 times! And a quote from the user's manual:
"Each time the wrong password is entered , the device response time gets longer until the device appears to be not responding."
Click to expand...
Click to collapse
, but I don't want to hardreset it cause I have some contacs saved on it and i have no backup! I tried to backup it in bootloader mode but i don't know how to...
Can someone help me?
ok thred need to be closed, i have unlocked it
i try to update my phone by pin method ..but i forget to turn on my phone after i bridge the pin 1 and 3 [very stupid ] Result is now i can't open my phone .when i try to turn on the green light[phone status light ]will on for 10 sec and nothing happen .not even the backlight . i using t-01a .please help me to fix this
sadly for my stupid
sorry for my bad english Hope you will help
Thank You
Message deleted because Don't know about T01A, sorry.
watquik said:
i try to update my phone by pin method ..but i forget to turn on my phone after i bridge the pin 1 and 3 [very stupid ] Result is now i can't open my phone .when i try to turn on the green light[phone status light ]will on for 10 sec and nothing happen .not even the backlight . i using t-01a .please help me to fix this
sadly for my stupid
sorry for my bad english Hope you will help
Thank You
Click to expand...
Click to collapse
Try to put original rom in sd and then do the pin method again.
Don't forget charge full your battery.
I'm not sure if go work with it but just try.
with T01A i thought i read somewhere that you have to bridge pin 1 and 2? i think i read it in 'how to flash a custom rom' on the TG01 ROM development page
just read it and it seems i'm talking aload of rubbish, sorry :/
just flash short 1 and 3 with the official rom.
gamerr120 said:
with T01A i thought i read somewhere that you have to bridge pin 1 and 2? i think i read it in 'how to flash a custom rom' on the TG01 ROM development page
just read it and it seems i'm talking aload of rubbish, sorry :/
just flash short 1 and 3 with the official rom.
Click to expand...
Click to collapse
Bridge pin 1 and 2, press power button for 10 seconds.
cktp said:
Bridge pin 1 and 2, press power button for 10 seconds.
Click to expand...
Click to collapse
alraeddy tried but still no luck i got only greenlight
however
thank for all helping
sadly
Xperia X2 unlock, full of OK, solution can not enter the unlock code, enter the unlock code error problem! !
xiaowu said:
Xperia X2 unlock, full of OK, solution can not enter the unlock code, enter the unlock code error problem! !
Click to expand...
Click to collapse
Dude... what are trying to tell us?
Mod Edit: to further clarify that, moved to general as not rom dev related
no solution
what do you mean by that. still my x2 refuse unlock screen. after entering the right code. is still static. help pls is urgent
remove the battery, and restart your phone...
help
thanks for responding bro,the fact is the phone will not respond after typing the code when u press the padlock it not say anyting.kindly assit is very urgent.
should you mobile phone not react, so install the offical SE Firmware Updater and reinstall the ROM
The update you could btw do yourself.. But you will loose EVERYTHING you have stored on your phone, including contacts, sms etc.
Can you connect your mobile phone with Microsoft Aktiv Sync ??
If so store your data !!
My phone with the same problem. When the phone X2 run at low baterry it seem to show windows popup notify about Low baterry and I slide to unlock the phone and it didnot respone for along time (ex:1h) and after that the message "Unlock" the phone appear require to enter unlock code althrought I never set the code for my phone. I try to enter many time of code like 0000 or 1111 and so on but not effect. And the best solution is remove and insert the batery again. I wonder ever time low batery I try this?? Anyone solve this problem perfect? I realy extream unendureable with this.
Thanks
hello, this is my first post... I have problems with my HTC hd2 phone, i made him to lock (with password) for every min if its unused, but when i want to unlock ( to enter passcode for its unlocking) it just wont work, i mean like my phone is not reacting on my passcode, so i dont know what to do because im not expirienced with phones that much .... im useing windows on btw, pls help me thx
... and if its possible to flash current softwere, or do something pls help, and explain ..
i know wen that happened to me i had to hard reset the phone to erase the password, hard resest: hold both volume buttons + end while the phone it off then press the up volume button once the screen load.
yeah, i did it too .... but, u know, i thought that someone else knows other way... thx anyway ... i will never make my phone to lock with passcode