Hi,
every time I enable the bluetooth headset, every sond of the PDA is off.
So I can't ear the phone ringing of everything that require de sound.
Can I change this settings on my qtek s110?
King Regards
Related
hi ppl
i use an austrian mda2 w/ ROM 1.6.00GER and ExtROM 1.60.07 together with a parrot ck3000 handsfree in my car.
i use the original bt stack w/o ANY changes.
making calls and taking calls is no problem at all and works most of the times.
the problem is as follows: when i enter the car, bt turned on, and also profile says "BT Headset ist eingeschaltet (means bt headset is turned ON)", and the n i want to place a call, the call is not routed over the handsfree. explanation is simple: when i change back to "today" - bt is turned OFF !!!
so my conclusion: everytime bt is used for the first time after disconnetion from the handsfree, it just turns OFF when it should connect. after i turn bt on by hand again it works w/o any problem. ('till i come back to the car of course - and everything starts again)
this is very annoying....
so has anyone any hint what to do? i wouldn't really mind updating to an english rom - if i just knew that that does work.
thanks,
servus ize|man
when i use this one
http://bluetooth.i-networx.de/index_e.html
my device turn bluetooth on when i call even though i dont have a bluetooth headset maybe it'll help you
thanks rudegar
i know that stack by TOWA. unfortunately that does not work at all here
i'd love to use it, but w/ this stack my handsfree is reconized sometimes, sometimes i have to pair the devices every time i start my car, and i can NEVER place calls with the combination mda2 with networx bt manager installed.
maybe someone has the same experiences and can report them
servus ize|man
i have a strange problem with a jabra bluetooth head set and my qtek s110.
problem is when using the headset to place a call all works fine but if i receive a call the headset is silent.
any ideas?
thanks
Hi all,
When i use "iTech Clip Radio" bluetooth handset with A2DP mode, all ringtone will play on the headset and the phone no sound play, but if i switch it to headset mode (not A2DP), the ringtone will play on the phone and the headset with play a beep sound for incoming call.
Anyone can teach me how to fix this problem.
My phone is X01HT
WM5 AKU 2.3
ROM Version: 1.23.708.4 (T.Chinese)
ROM Date: 07/24/06
Radio Version: 1.16.00.00
Protocol: 32.53.7018.01W
Thanks
i dont think its a problem, that is normal behaviour for headset and a2dp profiles in BT.
If you want all sound routed to your headset when using the "headset" profile, then yu need to route all sound to it. there is a thread for this with a hack available. seek and you shall find.
How to set the ringtone play on phone and headset when i use A2DP profile ?
Thanks
Hi folks,
can anybody confirm this behavior ?
When I plug in my headset, my ameo still plays the ringtone from ist speakers on an incoming call (yes, the ringtone is also on the headset).
Is there an option i missed ?
Thanks for your help, best regards.
I find this extremly handy, when im driving I dont have the earphone in my ear all the time. It also does it with a bluetooth headset. im sorry I don't have the answer.
first off, i love al bundy
ok now that thats over.... what headset do you have, is it bluetooth or wired headset
Guys,
I discovered a strange issue. When my Hermes has no headset connected at all the ringtone plays after 1 ring, en thats normal for a Hermes.
When I connect my Hermes to a bleutooth carkit the ringtone also starts after 1 ring. So far so good.
But, when I connected the Hermes to the default wired HTC headset the ringtone starts playing after 2,5 rings?
What can I try to solve this?