ATOM - auto answer - iPAQ rw6828, XDA Atom General

anybody know how to switch off the feature that makes the atom automatically answer all calls on the 2nd or 3rd ring when the head phones are plugged in?? :roll:

I have a Atom exec and am having the same problem of it auto answering calls. But in mine it happens even without the head phones.It just vibrates once and answers the call. I did a rom upgrade as well as a hard reset but the problem is still there. I think this is a software glitch because as soon as I hard reset it it works, But if i try to change ANY settings (ex:edit the items in the today screen) the problem reappears. Please help me on this....

automatically answer
I have same problem. But when changed another network sim phone will work fine. I asked about this problem from my network operator they told me some sim cards not support with this phone so its automatically answer the calls.
I checked it and i fix my error.

Related

M3100 cannot make outgoing calls

I've recently bought a SIM-free SPV M3100, however I cannot make outgoing calls using my old 2G SIM. The phone accepts incoming calls with no problem, and is able to send texts as normal. But whenever I try to make an outgoing call, it comes back with the "beep beep beep" network busy and call ended status. I've done soft and hard resets to no avail.
The phone works fine as I have tried my wife's Orange 3G sim and outgoing calls can be made okay. I've also tried my 2G SIM in my wife's M5000 and that works fine making outgoing calls okay.
I've spoken with Orange and they seem to think there shouldn't be a problem and that 2G SIMs are supported. They've reflashed my SIM but still no success.
Has anybody seen anything similar?
You can try, hardreset, then just after you setup your security stuff (eg screen where it ask you for the phone's PIN), perform a soft reset. This will prevent the EXTROM stuff to be installed. Just incase some of the settings there are messing your thing. Worth a try.
Thanks for the advice - tried that, but still no luck unfortunately

Trinity locks up when answering/ending call

I have a colleague with a HTC P3600 GER, he complains that sometimes when he presses green button to answer a call or red button to end the call the device becomes unresponsive and he has to soft reset the device.
Is this a known problem?
Problem 3G -> GSM
Hi !
Same issue with my device but only in one condition:
I get an incoming call within a mixed 3G/GSM provider network (A1-Vodafone Austria) - i press the green button and my Trinity switches from 3G to G - the call seems to be answered but i cannot hear anything.
----->I wrote the following error description to HTC:
Massive problem answering phone calls in mixed GSM/UMTS network.
My P3600 works fine when the display shows 3G Network. Answering a call works fine by pressing the left phone button. The display closes the caller bubble and switches to the connected status and shows caller and time and so on. But every time the phone is connected to only GSM radio station - display shows "G" beside the antenna icon i cannot answer a single call. Pressing the left phone button results in showing the white bubble with caller information and nothing happens - the call doesnt start the calling party always hear the normal beep tone while waiting for pick up of the phone. In this circumstances i cannot hear anything from speaker and also cannot end the call by pressing the right phone button (hangup) - the software of the P3600 stops responding and the caller bubble is frozen at the display. When the call is discontinued by the caller the P3600 resets to normal activity waiting for a call and showing a missed call !! This happens at every GSM call - about 10 t! imes since yesterday !! It is very important for me that i can answer calls in both network connection modes because the austrian provider A1/Vodafone has mixed environment all over the country. The receipton of GSM while the problem comes up is always more than 2 or 3 bars on antenna display.
Hope that there is some possible solution for this problem.
ROM Software Version is:
1.16.407.2 (German)
Setting for network provider is:
Automatic
Band selection is:
Auto
Auto
Many thanks in advance !!
Gerhard from Austria
----->The answer from HTC was:
Hello
This seems to be a very strange issue that you are experiencing and something that we have not heard of before.
Does this occur every time that you receive a call in a non-3G area?
I would recommend that you perform a Hard Reset on the device. This will restore the device back to the factory software settings. This will also remove all settings, contact , calendar information as well as any files and SMS.
Once this has been performed I would ask you to test if this has resolved your issue. If this has then you should experience no more issues. If this does not solve your issue then I would recommend that you contact your local repair center, details below, to arrange a repair of your device.
+ 43 (0) 508115555
[email protected] <mailto:[email protected]>
Yours sincerely
Dan Mackie
[email protected]
http://www.htc.com
----->The Hardreset does not fix the problem :-(
Still waiting for a firmware upgrade ....
Gerhard
Since Uprade to Radio ROM 1.41.00.11 (http://forum.xda-developers.com/showthread.php?t=304006) i have no more problems with answering phone calls !!!
Hope the Radio ROM will be included in an official ROM Upgrade from HTC soon.
Gerhard

Please help - receiving phone calls

Hello,
I bought a new HTC advantage x7501 unlocked, trying to use it on Fido network, however whenever I call the unit, the unit does not being to ring until at least the second ring, usually the third and often I miss a phone call completely. The signal strength is at its maximum when tried this. I did do a hard reset, searched google and all nada. Can someone please help ?
Thanks
Just tonight I was running call tests on my unit, and I see the same 2-ring delay. Doesn't matter if its asleep or fully on. I still have plenty of time to answer before voicemail kicks in. That delay is dictated by your carrier.
What sim card are you running? Do you know? Is there any way the check if you have the 64k or the 128k? I found some threads not related specifically to the X7501 but to the HTC hermes, that if you have the 64k sim card and an HTC hermes you might get some communication troubles, but that thread was pretty old and I'm sure HTC fixed that issue already.
Anyhow, hard reset doesn't solve this problem, and I do not even know how to begin addressing this issue.
Try some or all of the following:
Make sure your ringtone is in the Windows folder, or the ringtones folder.
Try a .wav ringtone (yes, i prefer mp3 too - wavs are too big)
Tweaks2k2.net has a disable 3 second delay option - there is probably a registry key somewhere.
marek101 said:
Hello,
I bought a new HTC advantage x7501 unlocked, trying to use it on Fido network, however whenever I call the unit, the unit does not being to ring until at least the second ring, usually the third and often I miss a phone call completely. The signal strength is at its maximum when tried this. I did do a hard reset, searched google and all nada. Can someone please help ?
Thanks
Click to expand...
Click to collapse
which radio version are u using sometimes it is releated to the radio version and upgrading or downgrading to another rdio helps the problem. missing calls are mostly releated to radio version of devices.
I have not flashed this unit at all, and the default ringtone is there and yes I tried changing it too.
I'm begging to suspect that this might be a sim card issue. I'm using SM-32 from fido, is there one that is sm-64 or 128? google search did not reveal much..
Thanks
hi,
i use phonealarm software with my athena, and i have the next issue:
if i active phonealarm, the phone sounds after the second or third ring,
but if i deactive phonealarm, the phone sounds just after the first rings.
use you PA soft?
note: i have tested and obtained the same results storing the rings at the
storage card, microdrive or programs memory. the problem is PA !!
next probe:: enable PA but set to "System" the "ring" and "ring type" parameters
at the all profiles. the result is fine: plays the configured sounds after the
first ring [i use mp3]
S.O.S
Is PhoneAlarm software enabled by default? I can not seem to be able to locate this anywhere on the phone?
Plus I got a little bit further with Fido, I have disabled my voicemail and now the phone rings after the second ring. Does this make any sense to anyone ?
S.O.S
SOLUTION TO THIS PROBLEM, READ:
Simple, the "Radio" code that comes with the x7501 / x7500 unlocked can NOT handle the the "Name Display" feature properly, thus causing the phone to miss class and or ring later. In EU they do NOT have "Name Display", wow. Thats the problem. I wish to that I found the answer sooner, I thought that is the purpose of such boards like these, no? Am I that wrong?
http://www.palonek.ca/
Just need to call your carrier and have them increase the ring count before voicemail picks up. Tonight at dinner my mother complained about this on her phone - it would go to vm after 3 rings. She called cust service and upped it to 6 rings. Problem solved.
marek101 said:
SOLUTION TO THIS PROBLEM, READ:
Simple, the "Radio" code that comes with the x7501 / x7500 unlocked can NOT handle the the "Name Display" feature properly, thus causing the phone to miss class and or ring later. In EU they do NOT have "Name Display", wow. Thats the problem. I wish to that I found the answer sooner, I thought that is the purpose of such boards like these, no? Am I that wrong?
http://www.palonek.ca/
Click to expand...
Click to collapse
is the solution at the palonek web ?? i don't not !!

Htc Touch Elf, calling problems

Here is the problem.
Altough i get full signal, i can't make/receive calls.
If i make a call it disconnects and i can hear a string sound (similat to a guitar).
If i receive a call the voicemail answers.
I cant make calls like *100# or any other stuff.
I changed the Radio, from 2.97.xx to 3.34.90 (or similar) then downgraded to 3.21.90
Is this a virus?
After i make a soft-reset i can make a call, but after 2-3 minutes, i can't make anymore.
Please help.
Btw, i'm using Orange.
Thanks in advance.
Please help
try to do a hard reset !
dubberz said:
Here is the problem.
Altough i get full signal, i can't make/receive calls.
If i make a call it disconnects and i can hear a string sound (similat to a guitar).
If i receive a call the voicemail answers.
I cant make calls like *100# or any other stuff.
I changed the Radio, from 2.97.xx to 3.34.90 (or similar) then downgraded to 3.21.90
Is this a virus?
After i make a soft-reset i can make a call, but after 2-3 minutes, i can't make anymore.
Please help.
Btw, i'm using Orange.
Thanks in advance.
Click to expand...
Click to collapse
I'm also interested as to why you downgraded the radio? Did you get the issue on the 3.34 version? If not, can you not just put that back on?
I'd try hard reset before anything else like nnph said.
Stu
I had the same problem with an Orange SIM and the solution was simple.
I had a card SIM of 32k, I changed it for another 64k and problem solved.
Orange charged me 5 euros for the duplicate card, that's all.
in order to get to the bottom of this you should try:
1.if you consider the sim to be the problem: put the sim into another phone, see if that works
2.if you consider the phone to be the problem: try a hard reset! think if you had the problem before/after radio upgrade? if hard reset not working then try a different rom/radio.
If none of the above works for you than start to take into consideration a hardware problem, which I really doubt !!
Ironjon, did you had the exactly same problems?
I also have Cosmote, but it was doing that only when i had weak signal.
In other phone is working.
But i think it's sim's card fault. I only paid for the phone 25 E, it had broken speaker, i had someone to repair it for free. I'm not very upset if it not works, at least i can keept it for wi-fi and games.
dubberz said:
Ironjon, did you had the exactly same problems?
Click to expand...
Click to collapse
Yes, I had the same problem.
I tried with 3 SIM cards of 32k and did not work with any.
I tried with some SIM cards of 64k and works fine with all.

Cannot send SMS but can recieve

Hi there from the title its pretty self explanatory
im from melb, aus
got a "Telstra" Touch HD but im using another different companies Sim card in it
i can make and recieve calls
i did a "Clear storage" but nothing helped there
i read about something referring to "At commands" or "at commanders"
but nothing found doing a search
thanks
same problem with me.. i send a message and after some time it says message could not be sent.. sometime i receive the message with a delay too.. i checked my sim in other phone, there it is fine.. the problem is only in touch
Similar problems connecting to internet and making phone calls
I occasionally have the problem sending texts but more frequently cannot make a phone call or data connection. I have found that if I go into the Comm Manager and set the phone to Airplane Mode and then back to Phone mode that this works 9 times out of 10. However, this is not a very satisfactory or permanent fix. If anyone has a more permanent solution I would be interested in hearing it. I live in the UK and am on the the 3 network. I have a feeling it may be an issue with my provider and not the phone but the help staff at 3 are useless. Thanks!
hey there
sorry for late reply
but i had my service provider reset my messaging service and it worked by the end of the day.
not sure why it was the case. too complicated for me to try and explain probably.
peace

Categories

Resources