Hi,
I finally got the i.Tech R35 headset for my Atom and a Mobin iBT-2 adaptor for iPod. While it works ok individually for my Atom and iPod for listening to music, it seems the switching between the phone and iPod is not very smooth. Just wonder if anyone is using similar 'combination' of headset/adaptor can share with me your experience.
Thanks.
Related
who can share the experience like subject mentioned.
Don't have the Atom myself but tested my BT I-Tech Clip with my mates one and it worked on first attempt.
Just pair the devices as normal and the PDA will recognise it to be a headset.
I use iTech S35 ... works great
I am using the iTech S35 STEREO Bluetooth headset to listen to STEREO MP3 music. I also use it together with TCPMP to watch movies in STEREO. It also operates as handsfree phone.
It works great !
I chose the iTech S35 because it has a 3.5mm female jack so that you can plug in ANY headphone u want to use. The headphones that come with the S35 is abit crappy but who cares - you can use your own !
Most Bluetooth headsets have the headphones built-in so you are stuck with what it comes with but not the S35
if you choose the S38, it even has built in controls for controlling the "play", "next" etc. so the Atom stays in your pocket while you control the player. I haven't tried it but don't see any reason why it should not work.
I am full of praise for the S35 !
For phones I use the Audio Technica "PEAR" necklace phones so my headphones stay tangle free. I think the two makes a good combination.
One note : You won't have radio if u use the S35 or any other bluetooth headset 'cos it needs the headset that comes with the Atom plugged in as the antenna as well. So if u want radio u gotta carry that headset with you.
i got a BlueAnt X3 headset
It can only act as a handsfree... however, it allows me to listen to music when it's connected to my other mobile phone... so the problems seems to be with Atom... can anyone help?
Please see my response in this post
http://forum.xda-developers.com/viewtopic.php?t=50615
following link
wierd all i get is crackling when i try that :/
tho it sort of crackles to the beat
Just bought Plantronics 590A bluetooth stereo headset, and tried it out with my prophet (XDA Neo with JAMin WWE 2.13 ROM). I would say it is really a perfect combination.
I have tried HT820, and also another one from Creative (I can not remember the name), but for those two, the sound quality is really bad!!!!! Espcially for HT820, you can clearly know that you are wearing a wireless headset, since the sound quality is way much worse than wired headset! I do not understand why so many people are still use HT820, anyway it was really terrible. So, I sold both my HT820 and Creative one on eBay, and started searching for better quality headsets. I found many reviews on Plantronics 590A, and all of them compared the 590A with HT820, and concluded that 590A is way much better than HT820 in terms of sound quality. So, I finally decided to give 590A a try.
It is really a perfect match to my Prophet. The sound quality is superb. You would never notice you are wearing a wireless headset through A2DP. The sound quality is even better than many wired headsets on the market. Anyway, the 590A is the best bluetooth stereo headset I have ever tested. All the buttons worked perfect, forward, and back button worked perfectly. Play and pause worked perfectly, too. When a call comes in, it automatically switched from stereo music mode to handfree mode (during the call, it is still stereo, but the sound quality in handfree mode is not as good as in stereo music mode. But you can hear crystal clear voice in handfree mode from both ear phones). Anyway, everything is perfect! I strongly recommend the 590A.
Also, a universal bluetooth adaptor is included (3.5mm). I used it to listen music from my laptop. It is wonderful. But you know, since I used the 3.5mm adaptor for bluetooth, the forward and back button of the headset is not working. That is normal. I can not blame it. Again, the sound quality is superb, and the signal from the bluetooth adaptor is amazingly strong. I can listen music from downstairs, upstairs, 2 or 3 rooms away without losing any signal and sound quality.
The only problem I found is that after I used the headset to listen music from laptop through the included bluetooth adaptor, if I want to switch to my prophet, I have to turn off the headset and turn it on again, otherwise, the headset will not automatically switch from one device to another device. I am not very sure it is really true, or I did not set it right.
I currently use a Holux Bluetooth GPS device with TomTom on my Vario, which works fine. I connect the phone's headphone socket into my old car stereo via a cassette adaptor for both music and TomTom speach, and I use the inline mike in the adaptor cable for handsfree phone calls. It all works fine.
However, my new car will have a CD player only (no cassette) so I was thinking of getting a little Bluetooth audio receiver to cut down on the cables and transfer the audio wirelessly from the phone to a box plugged into the new car radio's AUX input. Will both Bluetooth devices work simultaneously, so I can have TomTom using its bluetooth GPS module at the same time as the phone outputting audio to the other bluetooth device?
And what about handsfree use, is there anything that will allow me to also use the same bluetooth setup as a handsfree device, as I'll no longer have any microphone in the cable, since there won't be a cable...!
I know what I want to do, just not sure how to do it. Thanks for any help folks.
Andre
Any thoughts on this anyone?
I tried it out in a shop using a Sony car radio with Bluetooth support, and it played MP3s fine using PocketMusic once I'd paired the devices. The Sony's ">>" and "<<" keys even selected next/previous tracks perfectly.
However as soon as I started TomTom (v6), the audio only came from the phone's built-in speakers. Even after then exiting TomTom and restarting PocketMusic, the sound still came from the built-in speakers only.
So, any thoughts on how to get TomTom's voices to play via the car stereo using Bluetooth A2DP?
Andre
Not sure about this - I tried on my Wizard with WM5 to have two BT devices simultaneously. Holux 236 GPSlim and Jabre 620s results in extreme skipping. Maybe tuning down the data rate for the BT-Audio could do the trick, which I haven't tried yet.
Fm transmitter
Get a Fm transmitter plugs into the headphone socket and you can tune your car radio to pick up the signal i use one get one on flybay for £5
Hmm, maybe I should just upgrade to a Vario III (Kaiser) which has GPS built in? Or just stick with the old-fashioned solution of a 3.5mm jack cable.
Andre
If I understand the question right (if not sorry), you're wanting to run 2 different bluetooth devices at once but can't. If so it's the radio. My moms Acura TL allows multiples devices (my phone and hers). But my 2011 Forte wont. I paired my Ipod touch and my phone and if I'm playing music the phone wont work. I have to change devices on the cars audio system.
with my old n95 8gb phone i could play my mp3 files on it in the car and as it was connected to my parrott car kit i could hear it thru the cars speakers -
but i cant do it with the hero - yes the hero works perfectly with the car kit - but when you go inot the music player on it - the music only comes out fo the phone -
has anyone any ideas ?
What parrot car kit have you got? The sound from the MP3 links using A2DP BT profile (designed for highish quality stereo output) and only the latest Parrots use that (my CK3000 does not) All the others only support handsfree BT profile which is mono and poor quality. So it will not pick up the music from the Hero.
To elaborate, *some* phones will play music through the hands-free profile. iirc, I could do it on my HTC Vogue with WinMo.
You are right but I have never managed to get my Hero to. If anyone has I would be interested in hearing how. Trouble is it will be mono lo-fi quality.
At least the sat nav voices uses handsfree - on my previous WM mobile the TT voices came through A2DP and I had to get an app to change it
Correction the sat nav voices do not use handsfree profile on the Hero - I think they use A2DP and so my Parrot is unable to pick them up. However they are loud enough to hear on the phone's loudspeaker.
is it possible on the vibrant to stream music to my jawbone bt earpiece ? i used to do it on my touch pro 2. but with android im not sure ? help me out guys please
Yes, it's possible (though it may depend on what model Jawbone you have). Make sure your Jawbone is updated with H2DP and your phone should be able to recognize that the headset can be headphones as well. Check out the Jawbone website for more info.
If his jawbone is like my old one ( now use a Plantronics Pro), it didn't support Stereo (H2DP)
One of things I plan on looking into the Android source for is why someone hasn't come out with a "Mixer" app to route Media out the BT Headset profile. I'm sure there's a technical reason.
I've never seen a phone send music out to a BT headset... I don't understand why that is, it does if you use a wired headphone.
Things like podcasts should be fine in a mono headset. Even music would be better than nothing.
Robert
A2DP?
The new jawbone hero has an update that supports A2DP. Music sounds terrible through it tho, I even streamed NPR's car talk through it and it was scratchy. For some reason too, the phone prefers streaming over BT rather than through the audio jack when it's plugged in. Turned off the audio profile for the headset.