Database Users

HELP! I just bought a new siemens sx56 and it's not unlocked

I just received my new phone and it's not unlocked like it was supposed to be but came in a box that has AT&T written on it. We don't even have AT&T wireless in this area. How do I get started unlocking it so I can take it into one of the local service providers' store and have it activated on their service?
I haven't even opened the box. I'm a little overwhelmed with all the other advice and comments on this forum.....
How should I proceed? I really need someone to slowly walk me thru this and spell everything out - no abbreviations!!!
thank you

Hi ...
The first step is to tell which ROM you have (Start -> Settings -> System -> Device info).
Get the file XDAunlock.exe from www.xda-developers.com/XDAunlock and copy it to your device using the cradle and Active Sync from your PC
Locate the file on your XDA using the File Explorer and click it. It should ask you to confirm the unlocking. Click "Yes".
If this doesn't work, we will have to go into a longer process.
Good luck ...

Thank you som much for your prompt response. I will try that today and get back to you. I've been afraid to even open the box in case I have to return it to the store where I bought it.
Shmi

should I try the Special Edition XDA Rom ver 1.2 or try XDAunlock.exe?

Try the EXE file first. It's less in effort and much safer. Flashing the ROM should be the next step in case XDAunlock.exe gives an error message.
Good luck ...

I know this is going to sound like a novice, but that's what I am. B ut, do I leave the AT&T wireless SIM card that came with the phone in the phone while I run the XDAUnlock.exe application?

SId lock
Hi dude,listen If you had already tried to flash the ROM(special edition or kitchen)and a SID lock still been asked, try to type zero number eight times as code.For example 00000000.

Try
If you didn't install the new rom ,nevermind try what I've told you above.

unlocking with 0's
thanx. I'll give it a try with the new phone I'm getting. The old one is faulty and Siemens is sending a new one.

SIM LOCK

HELP .. HELP .. HELP ..
I know this subject is old but I could not what I need & how can I fix it
I have bought a pocket pc with phone edition from USA, and when I tried to insert my SIM card it asked me to but my PIN code, then ask me to but the unlock code (SIM code).
Now I am in Saudi Arabia.
WM2003
ROM Versino: 4.01.16 ENG
ROM Date: 02/04/04
Radio Version: 6.25.02
Protocol Version: 324e4
NOTE: I do not have a serial cable.
Thanks,
HFN[/b]

Check this: http://wiki.xda-developers.com/wiki/UnlockWiz
Hope it help you
Edit:
You have a WM 2003, this link work only for PPC2002

SIM Lock
DariusVE
Thank you for your help, I have tried this site, but It did not work because my device using WM2003 and also has no Wireless Modem feature.
Thank you.

Unlocking Quest
Here's my quest to unlock my T-Mobile PPCPE. I think some of this information might be useful to anyone confused about getting this
done.
First I called TMobile to request the unlock code. Since my account was up to date I figured no big deal right? WRong. My IMEI (or TMFT) number was not in their database so they could not give me an unlock code so they said. They told me to call the manufacturer of the device which they said was Microsoft. Knowing full well this was crap I called anyway.
The support guy got a good laugh; MS does not make devices
like this, they only provide the OS. He recommended I call Siemens.
So I did. Real nice guy named Jack had a good laugh as well. Not only could Siemens not tell me who really made my device (a third party made them for T-Mobile) but even if they had unlock codes they could not provide them because of contracts with TMobile. So I go back to TMobile.
The support people felt really bad about the run around and escalated really high up the chain (or so they said). AFter 48 hours I decided to take my own course. Having had good luck unlocking a Treo 600 through 'alternative means' I figured time to tackle the Pocket PC Phone Edition.
This was MUCH different and much harder to figure out.
After a good 12 hours and a whole slew of reading I finally figured out some stuff. Most of this may seem a no-brainer to some of the more educated XDA people out there but for us newbies maybe it will help.
----------------------------------------------------
The PDA side of the ppcpe and the radio/phone/gsm side are two totally different animals (not a surprise to some). When you refer to the 'operating system' you're talking about the ROM
like the XDA Developers special edition or any of the ROMs from the ROM kitchen at http://lumpistefans.dyndns.org/. The Radio or RSU (for Radio Stack UPgrade) is totally separate from this. The other variable is the bootloader version (Wallaby in my case).
Now my goal was just to use the XDAUnlock program. When I ran the program right from the defaults I got 'error getting unlock code.' All the posts I read said put on the special edition rom and you'll be fine but that did not do the trick. Still got the same error message.
Here's what I started out with:
ROM: 4.01.16 ENG
Radio: 6.25.02
Wallaby booatloader: 5.22
What finally worked:
Radio: 6.24.00
ROM: 3.17.03 ENG (xda special edition)
then upgraded bacdk to 4.01.16 ENG
Wallaby boot loader 5.15
How I did it
--------------
I meandered my way through this to eventual success and since the dratted device now works fine I'm leery about putting it all back to the old way and doing it all over again. Therefore use this process as a guide only, not a definitive instruction set. Also I walked through this as a troubleshooting exercise so some steps may not have been necessary. I eventually succeeded but maybe went the long way around to do it.
References
----------
- Bootloader utilities: Get to this by holding down the power button and pressing soft reset. You may have to hit the contacts button to get into the menu if you don't see it right away (like if you see a simple GSM OK message at the bottom of the bootloader display.
- Cold boot: the reset swtich on the right side bottom of the device with a picture of a red battery with an \ through it. This disconnects the batter from the mainboard and trashes all the data on the device except the Operating System in ROM.
What I grabbed
------------------
- XDATools
- XDARit
- ActiveSync (I used 3.7.1) and connection by USB cable
- Wallaby bootlolader version 5.15 files
- XDA Developers Special Edition ROM
- RSU 6.24.00 files
- XDAUnlock.exe
- SD Card (mine is 128 MB but I think as long as it's bigger than 64MB or your current memory in the device you're OK)
- pnewbootflash_40116.exe
All of these files are available here on xda-developers.com, just
search for them.
First back up everything. Not just using the sda backup tool, from the boot loader. You can do the SDA backup if you want, consider it backing up your data. You can also do the ActiveSync backup if you want to save your data. In my case all my data is stored in Domino so I don't
give a hoot about the data on the device. Your mileage may vary!
Second I'm doing ALL of this with no SIM chip in the device. THis may or may not be necessary.
Stick your SD card into the PDA. If it complains about wanting to format it go ahead and let it format the card unless you have stuff on it you want. I'd recommend dropping anything you want from the card onto safe media and just working with it as a blank the rest of the way through because it's easier to just wipe the card in between some steps.
Go to the bootloader utilities. Hit Contacts button and you'll get the boot loader option stuff. If the bootloader utilities you get to right away takes you to a menu with things like Boot+CE-->SD then you don't have to worry about hitting the contacts button. You only need Contacts button
if when you get to the bootloader screen you see nothing more than
some nice colors, the bootloader version and "GSM OK" message.
Take the Boot+CE-->SD option to back everything up. This will take a few minutes.
Once it's done pull the SD out ofthe ppcpe and stick it into your SD card reader.
Bring up xdarit and chose your removeable device.
If you have more than one MMC slot select the different ones until you get one that says 'wallaby' in the hex codes at the bottom of the XDARit screen. You'll be writing out two files, the first is the NB0 file (which is the bootloader) and the second is the NB1 file (which is the OS or ROM). Name these something like original.nb0 and 1.
Wipe the SD card (format FAT).
Stick the SD card back into the pda and soft reset, then cradle it.
Go to a DOS prompt and CD to where you put 'pnewbootflash_40116.exe.'
Type 'pnewbootflash_40116 nbl515.nb0' to write the wallaby 5.15 boot loader to the device. If when you downloaded the 5.15 bootloader you called it something else (like 'wallaby_boot_loader_V5.15.nb0'
you should of course use that name instead!
The output looks like this:
D:\XDAtools\binaries>pnewbootloader_40116 bl515.nb0
Copying D:\XDAtools\binaries\itsutils.dll to WCE:\windows\itsutils.dll
in FindFlashInfoOffset
protection found at 8c0d60f8
result: 00000000 00000000
Now..why did I downgrade the bootloader? At this stage I'm troubleshooting why I get the 'error getting unlock code' message running XDAUnlock. I've got three variables I know of, bootloader, ROM and Radio Stack. I chose to start with the bootloader because
some posts out there say boot loaders 5.17 and higher have some checksum that keeps certain ROMS from working properly. Perhaps if I'd started with the radio stack I'd have been done right away and saved a few hours but all the posts about possible device destruction made me start with the bootloader! Again, your results may vary!
Next I changed the ROM to the XDA Developers special edtion.
Make sure the SD card is in the PDA and cradle it.
Run OSIMagetool and load the ROM file in the first box, chose SD Card in the second box.
If you downloaded the special edition ROM you might
have some luck using the Installer that comes with it but apparently that
does not work with ActiveSync 3.7.1. I got messages that said it could not access the device or no connection etc. Instead I used OSImageTool to load the NK.NBF file included in the distribution. Note that to get to this file you DO have to unzip the EXE file you download!
Once complete pull the pda out of the cradle.
Hold power+soft reset to get the boot loader menu. This should show up as 5.15 now. It will automatically detect that the SD card contains a ROM that can be flashed to the device. If for some reason it does not automatically detect this maybe you have to hit Contacts. I did not have
to do that, it just told me to hit Action to download the ROM.
Hit Action button (aka the jog button) to write it to the device. This will take a few minutes, go grab a beer or two or three. I took the safe route and connected power to the device while writing the flash.
Once it's finished cold boot the device. I waited 2-3 minutes before re-engaging the battery.
Here's a gotcha. On the right side of the SIM there is a little switch. If the rubber door for the sim is not totally closed you can't get the device to boot. This switch is real small so it's very possible to miss it. You can see it fine if you take the back off the device (which I determined from a post here that told you how to get the battery out).
When it boots you should have the 5.15 wallaby booting the xda special edition. Follow the instructions to calibrate the screen and you're ready to move on.
Now if the radio is 6.25.02 xdaunlock won't work, it just generates the 'error getting unlock code' message. You have to downgrade the radio to have this work.
There's lots of posts around here that say don't screw with the radio because if it errors you've got a fried device. I imagine this is true so balance how bad you want to unlock the device against the possibility of totally frying the device. I've done two radio upgrades in my life on the PPCPE, both were OK but again, caution is advised.
Grab the 6.24 radio zip and unzip into a folder on your computer. Use activesync to copy the files to \windows on the device.
Execute the rsupdate.exe program to reprogram the radio to 6.24. WHen completed soft reset the device and go into start-settings-system-device info to make sure you're at 6.24 radio vesion.
Copy the xdaunlock.exe to the device and execute. It should say 'you're device appears to be SIM Locked, would you like to remedy this?" click Yes to unlock the device.
Now the device is unlocked. You can change the ROM to WM2003 now if you want (which I did). I imagine you can re-upgrade your bootloader
and radio stack if you want but I'm leaving well enough alone for now!

Hi ALL
I did unlock my phone thank you all.
Spicial thanks to "rhodwyn".
Best regards.

Works!!!
Thanks !!! Its working!!!

help in getting all the files needed....
Hi,
I would like to try this.... but where can I get the file pnewbootflash_40116.exe? Or is this a file that I'll create?
rhodwyn,
I would appreciate some help in getting most of the files.
Thanks in advance.

It worked for me too, thanks for the great solution, rhodwyn!

Thank you rhodwyn and everybody... my 2 cents
I love this site and I think that everybody does a great job. I found rhodwyn’s post to be very comprehensive and it is the one that ultimately helped me out this time. I don’t know if anybody is even interested anymore, but since I’ve been helped, I figured that I’ll try and help someone else. I assume that you’ve already read rhodwyn’s post.
I had the same starting configuration. I did everything that he suggested except for changing the bootloader and it worked perfectly. So, as he suspected it was enough to downgrade the radio stack and to load the special edition ROM. I subsequently upgraded my ROM and all is good (although I haven’t upgraded the radio stack and I’m not sure if I will).
I’ve read other posts about problems downgrading and upgrading the RSU and the 1% problem… I had a problem the first time I tried and I became very nervous, but I looked at rhodwyn’s post more closely and placed rsupdate.exe into PPC’s \windows folder and tried it again and was successful.

thanks
rhodwyn
10 minutes and done

trying to Unlock Cingular 8125

Can some kind soul help me here?
I have bought a Cingular 8125, specifically because I read the various threads here and thought that I would be successful in unlocking it. Previously, I have been able to unlock, on my own, Treos and various Nokias.
I have downloaded machinagod’s unlocker (version 0.2b) and followed each step, but my phone stays locked (“network is locked”) and asks for the unlock code.
Here is what I have done: synch is up and running; I place the CAB file on the phone and execute successfully. I then execute BAT file and select U (in another attempt, I selected C), the DOS windows disappears and then nothing…. I have waited, and waited, thinking the unlock takes some time, but nothing happens... Looks like there is a missing step somewhere in the chain of events.
Yes I have read the thread started by machinagod, but it’s so huge and encompasses so many different flavors of the Wizard that I could not find helpful information. I am starting this thread hoping that I can focus on why this 8125 is not unlocking like so many other devices.
Please help me, I am stuck with a $400 paperweight!

when i unlocked my 8125 i used the lockwiz program
put the cab file on the phone, executed it from the phones file browser,
then opened the bat file on my computer, and first had to CARRIER UNLOCK, (c) i think, then unlock (u)
it resets your phone and stuff.
make sure no sim card is in
i did it to 4 differnt ones just like that, worked perfectly.
maybe try HARD RESETING Your device first, then trying to unlock it again with those instructions....
hard reset go to start menu, settings, system, clear storage,
or hold camera and pinhole

I must be dumb or something...
Thanks for the info, I tried again but nothing happens.
There is something I do not understand. Here is what I do:
(1) hard reset.
(2) Run EnableRapi.cab on device
(3) Execute batch file, type 'C'
(4) DOS prompt disapears
(5) Nothing happens.
(?) WTF????????
Questions:
(1) After I type 'C' what happens, usually? Do I have to sync manually?
(2) Is the programm doing something in the background? If yes, how long do I have to wait before I type 'U' ?
(3) Do I have to sync between steps?
(4) DO I have to use wizardunlock.exe?
(5) when does the phoen reset itself?
I am sooooooooo confounded?! Can you please post a step-by-step direction, including every single thing I have to do?

IM having the same problem too.
On a side note, I was able to update my 8125 to the new AKU2 rom without CID unluck

If you have AKU2 the sim unlock feature will not work. Its a known problem if you search for it since HTS has locked that portion of the memory. If you look closely you'll get an error like "ITDISKWRITE error" or something like that. As of right now there is no fix and even if you locked it prior to upgrading it will be locked if you put AKU2 on it. If you are a Cingular subscriber you can send an email containing your name, social, number and IMEI to [email protected] or call them and they'll give you the code *hopefully*.

I have gotten the unlock code for my 8125. But I have no idea how to enter it to permanently unlock my phone.
Anyone got any ideas?

figured it out
i was having the same prob i would run it and the dos window would disapear but guess what i figured it out....u have to remove all the files from the .zip file and put them on ur desktop then run the files it wont disapear and it will show you what its doing and work i've done it so that should help

Imei-Check unlocker reverse

I am going to unlock a MDA compact 3 with the imei-check unlocker and I was wondering if I could help to make a free unlock tool....
So which tools do I need...

Start here, and read the whole thread accurately:
http://forum.xda-developers.com/showthread.php?t=280819

SIMLock
So is this nice little Programm you developed in so many hard steps also capable of unlocking the new HTC Artemis (MDA Compact III)?? I would need to know that before bying such a nice device.
On the Homepage of the IMEI-Check the Artemis is cracked with the exact same programm you can download there, but i don't feel like paying for the Unlock key ^^ I read the whole Thread in the Hermes Forum but the Artemis isn't mentioned there, so i wonder if this C3v1Unlocker will work with this Key Unlock key you posted because this Key is surely computed for a Hermes based device... Answers appreciated And thanks for your Great work!

Samson711 said:
So is this nice little Programm you developed in so many hard steps also capable of unlocking the new HTC Artemis (MDA Compact III)??
Click to expand...
Click to collapse
no, it patches the Hermes radio will not be valid for Artemis... although should be a very similar patch, because both devices are quite the same.
Samson711 said:
i wonder if this C3v1Unlocker will work with this Key Unlock key you posted because this Key is surely computed for a Hermes based device...
Click to expand...
Click to collapse
The "unlock key" is only valid after patching the radio.

Ah, okay, i see. Is anybody already working on a Radio Patch for the Artemis? I imagine, if the Radio is patched, it should be possible to create a similar Program for the Artemis, once someone gets a key for his Artemis IMEI, or am i wrong with that?

I've been investigating about this, it is not correct what I said previously: the patched radio method used in Hermes or Universal will not work on Artemis.
On Artemis (and other OMAP based devices) the SIM & CID lock area is stored encrypted on Disk-on-Chip (DOC), on the first block of binary partition 1 which can be accessed with pdocread.
I guess imei-check reads this area and patches it (probably they have to load a "fake" bootloader in RAM first to get SecLevel=0, as they did with the activesync part of the Hermes unlocker).
I don't have Artemis and can't do much more, but if someone is interested in researching I will be watching this thread and try to help, so feel free to post tech questions here if you are serious about writing a free unlocker for the Artemis.

thagangsta said:
I am going to unlock a MDA compact 3 with the imei-check unlocker and I was wondering if I could help to make a free unlock tool....
So which tools do I need...
Click to expand...
Click to collapse
have you read this tread ? -> http://forum.xda-developers.com/showthread.php?t=274860
I have "reconstruct" what actually that utility do. Actually utility uses ITSME utilities to access phone, but on exactly adresses. First it reads some area form RADIO of the phone to the file. That area is 16K large and contains IMEI.
pdocread.exe -n 1 0x040000 0x4000 -b 0x4000 "pdocread.dat"
After that in temp file pdocread.dat at addresss 0x300C - 0x3013 is stored IMEI. One digit is for some CRC check, I think CRC8 but didn't check at all. So that "IMEI Wizard" changes IMEI in file pdocread.dat, calculates and changes CRC digit, and writes file back to the RADIO of the phone with command:
pdocwrite.exe -n 1 "pdocread.dat" 0x040000 0x4000 -b 0x4000
So simple and working.
When it doesn't work ? It doesn't work on new G4 phones, even WIZARD and PROPHET. It works on the same phones, but with old G3 chipset. And phone MUST be CID unlocked and RAPI enabled. The reason ultility fail to work on new G4 phones is that pdocwrite is not ready yet to work with that phones. I am looking for utility to change IMEI on P3300 (Artemis i think) or S200 (PROPHET) too.

IMEI Change?!
The "older" HTC Devices can all be unlocked without changing the IMEI i think, there has to be a way to unlock this phone without changing the IMEI of the unit. Apart from the unlocking process being illegal already, changing the IMEI of a Celluar Phone is even worse Maybe i got your post wrong and you do not intend to really change the IMEI, i dunno...

Samson711 said:
The "older" HTC Devices can all be unlocked without changing the IMEI i think, there has to be a way to unlock this phone without changing the IMEI of the unit. Apart from the unlocking process being illegal already, changing the IMEI of a Celluar Phone is even worse Maybe i got your post wrong and you do not intend to really change the IMEI, i dunno...
Click to expand...
Click to collapse
I DO intend to change IMEI. Who do you think are ? My mother ? What's next ? To pull my ears ?
Yes, we ALL know consequences from changing IMEI. And we ALL read well-written topic about it >> IMEI changing is going to get you sore!. << Did you ?
And did you know that is some countries you just MUST to change IMEI to use your phone ? I will save your time for searching and point one of hundreds topics about this >> To all TURKISH fellows and others a must read story !!! <<. And because of this I can't upgrade to better phone ... for now.
So .. if you don't offer anything constructive but just criticism - please, go to flame on some other topic. Or better - just shut up.

serious business!
Kircho cool down and tell me something
I may be coming to Turkey early next year (January, maybe). Please confirm that roaming with my current provider for a week is no problem? Or do I have to carry my receipt?

kircho,
Probably you've been confused because the company that sells SIM-Unlocker for the Artemis is called "imei-check", but we were discussing about SIM-Unlock here, not imei-changing.

Haha!
Lol, Kircho... how old are you??
I don't care what you do with you IMEI, believe me, i really don't! All i said is that i would love to have a method to disable SIM Lock without messing around with my units IMEI, thats all.
It was NO CRITICISM of your work, my knowledge with PDAs and Windows Mobile does not suffice to render any code to unlock a device and i am not flaming here. If this thing you figured out works for your device, thats cool and i am glad for you, i just wouldn't do it with my device, thats it...

victoradjei said:
Kircho cool down and tell me something
I may be coming to Turkey early next year (January, maybe). Please confirm that roaming with my current provider for a week is no problem? Or do I have to carry my receipt?
Click to expand...
Click to collapse
There is no problem with roaming. If your SIM card is issued by some forign operator like UK Vodafone or Dutch KPN - you can use any phone in Turkey with such card.

Pof
Do you know of a way to unlock extended rom on Artemis? I tried the wizard unlock. It appeared to work for a while but ultimately it has done strange things. The extended rom seems to be visible but not the files within...after a while even the visibility of extended rom is lost.
Thanks, a.

I again have a Artemis (dutch mda compact 3) and I can test with for 2 days...
Im gonna unlock it with the paid imei check software....
I have tried to enter bootloader but it won't enter...
How can I be helpfull to do make an unlock tool...

@apap: sorry I don't have an Artemis, and I don't know.
@thagangsta:
Have a look at this thread in order to understand how this was done in the Hermes:
Reverse engineering the HERMES imei-check unlocker
The bootloader commands for the Hermes are explained in these wiki pages, someone should start researching Artemis bootloader and put the commands on the wiki, it is very similar to Hermes.
Hermes Bootloader Information
Hermes Radio Bootloader and AT command interpreter
Some hints that may help you:
1. You can run the unlocker as many times as you want, it doesn't matter if you've already unlocked your device, the imei-check unlocker will behave the same.
2. In order for the USB monitor capture to be useful, you need to click on the "COMPLETE" tab and when you have captured it, export it as ANSI TEXT.
3. If the app fails (communication error) you need to create 2 admin users, 1 for running usb monitor and the other for running the unlocker. Use right click, "run as..." and then select the other admin user. You need to repeat this process several times until you can successfully get the log.
4. be careful on what you post here, as imei-check has intelectual property rights on their work. Do not "copy" their solution, but reimplement it in another way.

EHh Pof
Just read the thread for the hermes unlocking. I'm not a complete noob but i'm still stunned by the technical data.
Removed a unformiliar program a week ago called "- -" after canceling a imeicheck upgrade (had no valid .unl file)
Reading "First the imei-check unlocker transfers a CAB file to the device via ActiveSync which installs an application named "- -", which contains at least MIGsoft LTD security certificate (used to sign the NBH file with the bootloader upgrade) and runs some other stuff like this (not completed):"
This must mean the unlockers of the hermes and the artemis work in the same way.
Main Questions are:
Is an unlock for the Artemis using imei-check able to use SuperCID?
Which bootloader can we use that is able to flash all roms?
Which code can we use for unlocking.
Edit
I've found an crack for themida secured files. POF You've stated that the .unl files are themida protected could some people post their unl files.
Could be an easy solution......

Perjan said:
Removed a unformiliar program a week ago called "- -" after canceling a imeicheck upgrade (had no valid .unl file)
Click to expand...
Click to collapse
You can usb-sniff what is transfered over activesync without the need to pay for it, it is done before it requests .unl file. For sniff the rest of the process (which is done in bootloader mode without activesync) you need to pay for the unlocker.
Perjan said:
This must mean the unlockers of the hermes and the artemis work in the same way.
Click to expand...
Click to collapse
Yes, they must be very similar.
Perjan said:
Is an unlock for the Artemis using imei-check able to use SuperCID?
Click to expand...
Click to collapse
Yes, but it's not sticky (will loose it after 1st rom flash after applying unlocker). I have solution for this to make supercid sticky if you reverse the process.
Perjan said:
Which bootloader can we use that is able to flash all roms?
Click to expand...
Click to collapse
Most probably the earliest shipped bootloader version. See to which version of bootloader imei-check unlocker downgrades your device when run with the proper key.
Perjan said:
Which code can we use for unlocking.
Click to expand...
Click to collapse
You will see it when usb-sniffing the unlocker.
Perjan said:
I've found an crack for themida secured files. POF You've stated that the .unl files are themida protected could some people post their unl files.
Click to expand...
Click to collapse
Available cracks for themida are for older versions... this is not the way to go for sure, I also investigated and got nowhere.
About .unl files I don't know... I said exe unlocker file is packed with themida, never looked at .unl myself, I think its pointless because usb-sniffing is easier.
Good luck!

Just used the monitor with the unlocker but i'm not able to understand what it does and don't have a .unl file.
Here is the logfile ftp://xdaupload:[email protected]/Artemis/Mdacompac3_unlock_no_unl_file.ms2
Pof Could you help me further.

ms2 is not useful... export capture in ANSI text format please.
Edit -> Export and Save as type "ANSI Text files".

Problem Unlocking M600 Orange

read loads of posts on this phone. i used lokiwiz03a and got the unlock code but i dont no where i am suppose to put the code.
any idea anyone

start your phone with another simcard in it from another provider. Then the unlockcode will be asked.
Good Luck

Yep, it worked for me just like he described, although the first time it didn't I had to copy the cab files to my m600 and run them. Then I swapped the sim and it worked