Hi,
For some strange reason, I'm unable to connect to the Internet when I have my USB connected to my 8125 to a computer which has internet connection (the computer I'm using right now). It constantly tries to dial the GPRS.
It used to connect to the Internet and never dials to any GPRS. This started happening today. I haven't changed anything at all.
When I open PIE it will load the MSN page but still tries to dial. I try another URL (yahoo) and it will not connect. I believe its displaying the MSN homepage using the temporary files.
Please help!
Try a couple things...
On the PPC go to Start > Settings > Connections Tab > Network Cards > and make sure "The Internet" is chosen for "My network connects to:" and click "Ok"
Next, on your computer, open ActiveSync > File > Connection Settings > and make sure "The Internet" is chosen for "This computer is connected to:" and click "Ok"
(Even if those settings are correct already, still pull down the menus and choose them again, clicking ok afterwards, everyone knows windows likes to accidentally forget settings even when they are still correctly displayed) Reboot the computer and PPC, then try again
If all that fails, then on the PPC go to Start > Settings > Connections Tab > Connections > Advanced Tab > Select Networks > and click "Edit" for whichever connection you have chosen for "Programs that automatically connect to the internet should connect using:" > on the modem tab make sure "auto pick" is selected > on the "proxy settings" tab make sure "this network connects to the internet" is checked > make sure "this network uses a proxy server..." is UNCHECKED > click "Ok" > click "Ok" > click "Ok"
That should do it for ya
Related
Guyz,
my exec shows 'Connected' to my wireless access point (KasuDEN) but when i'm trying to access any internet page in exec it's trying to connect to 'O2 Active' which i don't want to do....
how do i make use of my broadband wireless connection in my exec pls ?
Kindly throw some light .....
Thanks in advance
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
mikeycrawford said:
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
Click to expand...
Click to collapse
Thanks mate...it worked...
mikeycrawford said:
Go to Start -> Settings -> Connections -> Connections -> Advanced -> Select Networks -> and change "Programs that automaticaly connect to the Internet should connect using:" to "My Work Network"
Click to expand...
Click to collapse
HI, I have the same problem. I made the same changes and still does not work.
My current config I can use terminal services to connect to my other machines, but when I open internet explorer it says connection was lost and to re connect.
Is this a bug or is there another setting I need to make.
I set both to " My work Network "
Thanks in advance..
Hi all,
i have recently bought a laptop and as i am away alot, it would be helpful for me to connect to the internet through my phone. e.g. use my phone as a modem. However i cannot find any documentation on how to do this?
Can anyone tell me if this is possible, and how? I have tried through activesync but no luck.
If you could let me know that would be brilliant!
Thanks
Yeah its possible... just finished setting it up on mine This site helps:
http://www.filesaveas.com/gprsconnect.html
But i'll walk you through cos it took me a while to get it to work...
Firstly, are you on pay monthly or pay as you go?
There should be a program on you're XDA called "Modem Link" that is used for this. You can do it either over USB or infrared, though i recommend USB cos its much faster
Open this program and choose usb, then pick the Access Point you use to connect to GPRS normally on youre phone (check in the connection settings to see which AP corresponds to which settings if you need to) then press activate.
Now connect your phone to the laptop with the usb cable, and the new hardware wizard will pop up. Allow it to search the internet (you need a connection) and it'll install it automatically for you.
Then, On the PC, go to the Networking section of the Control Panel (Start > Settings > Control panel > Network)
Select "Make new connection" (this should start a setup wizard)
Choose "Dial up to Internet"
Choose the "connect via a modem" option
Enter the telephone number to dial as *99# (No area code, and turn off dialing rules)
Username for Pay Monthly is: o2wap
and for Pay and Go is: payandgo
Password for both is: password
When complete, go to Control panel > networks, and right-click on the icon for your GPRS connection. Choose properties and set the following: Connect Using - select your modem (infrared / USB)
You need change one other thing - to do with your modem settings. Do this as follows:
Go to Start > Settings > Control panel > Modems
On the Modems tab, select your modem, and press Properties
On the Advanced tab, you need to enter string in "Extra initialization commands". This initialisation string will need to be entered as:
+CGDCONT =1,"IP","wap.o2.co.uk" (for contract)
or
+CGDCONT =1,"IP","payandgo.o2.co.uk" (for PAYG)
Note the space before the =1. obviously dont include the bit in brackets.
I found I then needed to go into internet explorer and go on Internet Options > connections tab > choose "dail when network connection not present"
and then select the GPRS connection you made earlier > press settings > enable proxy server.
use the following ip address for the proxy server:
193.113.200.195
Now, I'm not sure which port number you will need, because it says to use 9201 but that didn't work for me, i use 8080. try both and see which will lets you load up a page.
press ok and try to load a page in IE. dial you connection when asked and it should work. try google as a test.
Tell me if you run into any problems.. I have it working on my pay as you go sim.. I have no idea if it will work on pay monthly, you might need to try using some of these settings:
http://www.filesaveas.com/gprs.html
-
Hello! I have a problem with WLAN. I couldn't find where to set up my proxy and port settings for WLAN. If I go to the start > settings > conections I can't set up a wireless network, just 3g, bluetooth etc. (but there are settings for proxy), but if I go to start > settings > network cards and then tap Add new there are just options that i need exept those two. Help me please!
P.S. I have WM5 and Qtek 9000 (HTC Unversal)
OK, after about 10 minute trying, I finally get it done.
When you select one AP name in Wi-Fi setting,it will ask which profile will the connection connects to.( I use Chinese version, I guess it will be "Default Internet" and "Default Company" ).The two connection is the two you select in setting->connection->connection->advance tab, the upper is "Internet" the lower is "Company", and you can make a new profile here using the "New" button,here you will find proxy setting and enter some proxy , because you are just using this profile in wi-fi ,so the "moderm" can be left blank.
When you have done the setting, you can turn on Wi-Fi, browse some web site, in taskMgr(additional application I installed) you will find the ppc has establish a tcp connection to the proxy server you set up.
Omnia, WM 6.1
I have used Activesync but the connection is bad. Sometimes I cannot open some sites, other times - I can open them. Weird...
I am trying something else: I went to Settings - Connections, I added new connection, and under "add new modem connection" -> "select a modem" there is Bluetooth! What is this, can I use my PC as a bluetooth modem?
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
Rudegar, thanks for the link, but the following part does not apply to my WM 6.1-based device. Where can I find these things in WM6.1:
# Tap the Bluetooth icon and tap the link saying <u>Bluetooth Manager</u>.
# Tap the starred Bluetooth icon.
# Tap the Join a personal network.
# Select Join a personal network option and tap Next.
# After your Connection Wizard sees your computer, select it and select Finish so that your HTC Creates a shortcut for this connection named Network with '?InsertYourComputersNameHere'. Please note that there is no need for a secure/encrypted connection.
# Double tap or hold and select Connect to the Network with '?InsertYourComputersNameHere' to make a connection with your access point.
# At this point or later, your HTC will ask you if this connection is a Work or Internet connection. I have chosen this as my Work connection.
On my device there is neither "Bluetooth Manager", nor "Join a personal network"
Meanwhile I am trying something else: http://media.snimka.bg/2551/011357944-big.jpg
I went to Settings -> Connections -> Connections, I added new connection, and under "add new modem connection" -> "select a modem" there is Bluetooth! What is this, can I use my PC as a bluetooth modem?
Hi *.
Odd problem, disabling Internet connection [GPRS/HSDPA] doesn't work. I've tried with NoData, HD Tweak and even checked directly registry setting: HKLM/Comm/CommMgr/Providers/{7C....}/Connections/Internet/Enabled is 0. And still somehow Windows connects when some app requires. Any idea what's wrong? It used to work, stopped some time after flashing with newest Dutty's ROM [6.1 based].
p.s.
Settings >> Connections >> Connections >> Advanced >> Select Networks is set to "My ISP"
"
Settings >> Connections >> Connections >> Advanced >> Select Networks is set to "My ISP""
and if you change that programs should not be able to connect to gprs
Change to what? 'My ISP' is already selected. Other options: P4 Data, MMS Networks, P4 Internet [this one should not work], My Work Network.
if you change it to My Work Network
it will only be able to connect to the internet
when you got wifi or is connected to activesync
over usb or bluetooth
Still doesn't work (or works to be exact). Either with "My ISP" or "My Work Network" windows connects with HSDPA (simplest test Weather panel >> Update Now).
I even reload settings with Connections >> Connection Setup and disabled "Internet" once again, still works.
Any other idea why it doesn't respect Enabled = 0?
Not sure if you can do this with you're provider, but you could try to delete the username and password from your internet connection settings. Settings >> Connections >> Connections >> Manage existing connections>> Edit>> and click next until you come upon user name and password. My provider requires that or my data will not work.
or the apn
I knew something has to be wrong. There was another connection (WAP) which was used when I've disabled first one (GPRS).
Sorry for confusion